1、 ETSI TS 102 871-1 V1.4.1 (2017-05) Intelligent Transport Systems (ITS); Testing; Conformance test specifications for GeoNetworking ITS-G5; Part 1: Test requirements and Protocol Implementation Conformance Statement (PICS) pro forma TECHNICAL SPECIFICATION ETSI ETSI TS 102 871-1 V1.4.1 (2017-05)2 Re
2、ference RTS/ITS-00352 Keywords ITS, network, PICS, testing ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Impor
3、tant notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written
4、authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document sh
5、ould be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the f
6、ollowing services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the P
7、DF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI
8、 registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members GSM and the GSM logo are Trade Marks registered and owned by the GSM Associati
9、on. ETSI ETSI TS 102 871-1 V1.4.1 (2017-05)3 Contents Intellectual Property Rights 4g3Foreword . 4g3Modal verbs terminology 4g31 Scope 5g32 References 5g32.1 Normative references . 5g32.2 Informative references 5g33 Definitions and abbreviations . 5g33.1 Definitions 5g33.2 Abbreviations . 6g34 Confo
10、rmance requirement concerning PICS 6g35 Mnemonics for PICS reference 6g3Annex A (normative): GEONETW PICS pro forma (Media independent) . 8g3A.1 Partial cancellation of copyright . 8g3A.2 Guidance for completing the ICS pro forma 8g3A.2.1 Purposes and structure 8g3A.2.2 Abbreviations and conventions
11、 8g3A.2.3 Instructions for completing the ICS pro forma . 10g3A.3 Identification of the implementation 10g3A.3.1 Introduction 10g3A.3.2 Date of the statement 10g3A.3.3 Implementation Under Test (IUT) identification . 11g3A.3.4 System Under Test (SUT) identification 11g3A.3.5 Product supplier 11g3A.3
12、.6 Client (if different from product supplier) 12g3A.3.7 ICS contact person 12g3A.4 Identification of the protocol 13g3A.5 Global statement of conformance . 13g3A.6 Tables . 13g3A.6.1 Introduction 13g3A.6.2 Media independent . 13g3A.6.2.1 Introduction. 13g3A.6.2.2 Protocol operation . 13g3A.6.2.3 Pr
13、otocol constants . 15g3History 17g3ETSI ETSI TS 102 871-1 V1.4.1 (2017-05)4 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members
14、and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org
15、/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the pre
16、sent document. Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee Intelligent Transport Systems (ITS). The present document is part 1 of a multi-part deliverable covering Conformance test specifications for Geonetworking ITS-G5 as identified below: Part 1: “Test
17、 requirements and Protocol Implementation Conformance Statement (PICS) pro forma“; Part 2: “Test Suite Structure and Test Purposes (TSS Part 3: “Abstract Test Suite (ATS) and Protocol Implementation eXtra Information for Testing (PIXIT)“. Modal verbs terminology In the present document “shall“, “sha
18、ll not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direc
19、t citation. ETSI ETSI TS 102 871-1 V1.4.1 (2017-05)5 1 Scope The present document provides the Protocol Implementation Conformance Statement (PICS) pro forma for Conformance test specifications for Geonetworking ITS-G5 as defined in ETSI EN 302 636-4-1 1 in compliance with the relevant requirements
20、and in accordance with the relevant guidance given in ISO/IEC 9646-7 i.2. 2 References 2.1 Normative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non
21、-specific references, the latest version of the referenced document (including any amendments) applies. Referenced documents which are not found to be publicly available in the expected location might be found at https:/docbox.etsi.org/Reference/. NOTE: While any hyperlinks included in this clause w
22、ere valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are necessary for the application of the present document. 1 ETSI EN 302 636-4-1 (V1.2.1): “Intelligent Transport Systems (ITS); Vehicular Communications; GeoNetworking; Part 4: G
23、eographical addressing and forwarding for point-to-point and point-to-multipoint communications; Sub-part 1: Media-Independent Functionality“. 2.2 Informative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For sp
24、ecific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity.
25、The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. i.1 ISO/IEC 9646-1 (1994): “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part
26、 1: General concepts“. i.2 ISO/IEC 9646-7 (1995): “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 7: Implementation Conformance Statements“. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the ter
27、ms and definitions given in ETSI EN 302 636-4-1 1, ISO/IEC 9646-1 i.1 and ISO/IEC 9646-7 i.2 apply. ETSI ETSI TS 102 871-1 V1.4.1 (2017-05)6 3.2 Abbreviations For the purposes of the present document, the following abbreviations apply: CBF Contention-Based Forwarding GAC Geographically-Scoped Anycas
28、t GBC Geographically-Scoped BroadcastGUC Geo Unicast ICS Implementation Conformance Statement ITS Intelligent Transportation Systems ITS-G5 5 GHz wireless communication IUT Implementation Under Test LS Location Service PDU Protocol Data Unit PICS Protocol Implementation Conformance Statement SHB Sin
29、gle Hop Broadcast SUT System Under Test TC Test Case TSB Topology Scoped Broadcast 4 Conformance requirement concerning PICS If it claims to conform to the present document, the actual PICS pro forma to be filled in by a supplier shall be technically equivalent to the text of the PICS pro forma give
30、n in annex A, and shall preserve the numbering, naming and ordering of the pro forma items. An ICS which conforms to the present document shall be a conforming PICS pro forma completed in accordance with the instructions for completion given in clause A.2. 5 Mnemonics for PICS reference To avoid an
31、update of all related documents when the PICS document is changed, table 1 introduces mnemonic names and the correspondence with the PICS item number. ETSI ETSI TS 102 871-1 V1.4.1 (2017-05)7 Table 1: Mnemonics for PICS reference Mnemonic PICS item PICS_GN_LOCAL_GN_ADDR A.16/1 PICS_GN_LOCAL_ADDR_CON
32、F_METHOD A.16/2PICS_GN_IS_MOBILE A.16/4PICS_GN_MINIMUM_UPDATE_FREQUENCY_LPV A.16/6 PICS_GN_MAX_SDU_SIZE A.16/8PICS_GN_MAX_GN_HEADER_SIZE A.16/9PICS_GN_LIFETIME_LOC_TE A.16/10PICS_GN_SECURITY A.16/11PICS_GN_LOCATION_SERVICE_MAX_RETRANS A.16/13 PICS_GN_LOCATION_SERVICE_RETRANSMIT_TIMER A.16/14 PICS_GN
33、_LOCATION_SERVICE_PACKET_BUFFER_SIZE A.16/15 PICS_GN_BEACON_SERVICE_RETRANSMIT_TIMER A.16/16 PICS_GN_BEACON_SERVICE_MAX_JITTER A.16/17PICS_GN_DEFAULT_HOP_LIMIT A.16/18PICS_GN_MAX_PACKET_LIFETIME A.16/20PICS_GN_MAX_GEO_AREA_SIZE A.16/24 PICS_GN_MIN_PACKET_REPETITION_INTERVAL A.16/25PICS_GN_NON_AREA_F
34、ORWARDING_ALGORITHM A.16/26 PICS_GN_AREA_FORWARDING_ALGORITHM A.16/27PICS_GN_CBF_MIN_TIME A.16/28PICS_GN_CBF_MAX_TIME A.16/29PICS_GN_DEFAULT_MAX_COMMUNICATION_RANGE A.16/30 PICS_GN_UC_FORWARDING_PACKET_BUFFER_SIZE A.16/32 PICS_GN_BC_FORWARDING_PACKET_BUFFER_SIZE A.16/33 PICS_GN_BEACON_SRC A.8/1PICS_
35、GN_BEACON_DST A.8/2PICS_GUC A.7/7PICS_GN_GUC_SRC A.11/1PICS_GN_GUC_DST A.11/3PICS_GN_GUC_FWD A.11/2 PICS_GBC A.7/10PICS_GN_GBC_SRC A.14/1PICS_GN_GBC_DST A.14/2PICS_GN_GBC_FWD A.14/2PICS_GAC A.7/11PICS_GN_GAC_SRC A.15/1 PICS_GN_GAC_DST A.15/2PICS_GN_GAC_FWD A.15/2PICS_SHB A.7/9PICS_GN_SHB_SRC A.13/1P
36、ICS_GN_SHB_DST A.13/2PICS_TSB A.7/8PICS_GN_TSB_SRC A.12/1 PICS_GN_TSB_DST A.12/2PICS_GN_TSB_FWD A.12/2PICS_GN_LS_REQ_SRC A.10/1PICS_GN_LS_REQ_RETRANSMISSION A.10/2 PICS_GN_LS_REQ_DST A.9/3PICS_GN_LS_REP_DST A.10/3PICS_GN_LS_FWD A.9/2PICS_GN_ADDR_AUTO A.4/1PICS_GN_ADDR_MANAGED A.4/2 PICS_GN_ADDR_ANON
37、YMOUS A.4/3PICS_GN_DAD A.4/4ETSI ETSI TS 102 871-1 V1.4.1 (2017-05)8 Annex A (normative): GEONETW PICS pro forma (Media independent) A.1 Partial cancellation of copyright Notwithstanding the provisions of the copyright clause related to the text of the present document, ETSI grants that users of the
38、 present document may freely reproduce the GEONETW PICS pro forma in this annex so that it can be used for its intended purposes and may further publish the completed GEONETW PICS. A.2 Guidance for completing the ICS pro forma A.2.1 Purposes and structure The purpose of this PICS pro forma is to pro
39、vide a mechanism whereby a supplier of an implementation of the requirements defined in ETSI EN 302 636-4-1 1 may provide information about the implementation in a standardized manner. The PICS pro forma is subdivided into clauses for the following categories of information: guidance for completing
40、the ICS pro forma; identification of the implementation; identification of the ETSI EN 302 636-4-1 1; global statement of conformance; PICS pro forma tables. A.2.2 Abbreviations and conventions The ICS pro forma contained in this annex is comprised of information in tabular form in accordance with t
41、he guidelines presented in ISO/IEC 9646-7 i.2. Item column The item column contains a number which identifies the item in the table. Item description column The item description column describes in free text each respective item (e.g. parameters, timers, etc.). It implicitly means “is supported by t
42、he implementation?“. ETSI ETSI TS 102 871-1 V1.4.1 (2017-05)9 Status column The following notations, defined in ISO/IEC 9646-7 i.2, are used for the status column: m mandatory - the capability is required to be supported. o optional - the capability may be supported or not. n/a not applicable - in t
43、he given context, it is impossible to use the capability. x prohibited (excluded) - there is a requirement not to use this capability in the given context. o.i qualified optional - for mutually exclusive or selectable options from a set. “i“ is an integer which identifies an unique group of related
44、optional items and the logic of their selection which is defined immediately following the table. c.i conditional - the requirement on the capability (“m“, “o“, “x“ or “n/a“) depends on the support of other optional or conditional items. “i“ is an integer identifying an unique conditional status exp
45、ression which is defined immediately following the table. i irrelevant (out-of-scope) - capability outside the scope of the reference specification. No answer is requested from the supplier. NOTE 1: This use of “i“ status is not to be confused with the suffix “i“ to the “o“ and “c“ statuses above. R
46、eference column The reference column makes reference to ETSI EN 302 636-4-1 1, except where explicitly stated otherwise. Support column The support column shall be filled in by the supplier of the implementation. The following common notations, defined in ISO/IEC 9646-7 i.2, are used for the support
47、 column: Y or y supported by the implementation. N or n not supported by the implementation. N/A, n/a or - no answer required (allowed only if the status is n/a, directly or after evaluation of a conditional status). NOTE 2: As stated in ISO/IEC 9646-7 i.2, support for a received PDU requires the ab
48、ility to parse all valid parameters of that PDU. Supporting a PDU while having no ability to parse a valid parameter is non-conformant. Support for a parameter on a PDU means that the semantics of that parameter are supported. Values allowed column The values allowed column contains the type, the li
49、st, the range, or the length of values allowed. The following notations are used: - range of values: example: 5 20 - list of values: , , ., example: 2, 4, 6, 8, 9 example: 1101B, 1011B, 1111B example: 0AH, 34H, 2FH - list of named values: (), (), ., () example: reject(1), accept(2) ETSI ETSI TS 102 871-1 V1.4.1 (2017-05)10 - length: size ( ) example: size (1 8) Values supported column The values supported column shall be filled in by the supplier of the implementation. In this column, the values or the ranges of values supp
