1、 ETSI TS 1Digital cellular telecoUniversal Mobile TelUser-to-User Signal(3GPP TS 23.0floppy3TECHNICAL SPECIFICATION123 087 V13.0.0 (2016communications system (Phaelecommunications System (alling (UUS) supplementary sStage 2 .087 version 13.0.0 Release 13GLOBAL SYSTEMOBILE COMMUN16-01) hase 2+); (UMT
2、S); service; 13) TEM FOR ICATIONSRETSI ETSI TS 123 087 V13.0.0 (2016-01)13GPP TS 23.087 version 13.0.0 Release 13Reference RTS/TSGC-0423087vd00 Keywords GSM,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 000
3、17 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any el
4、ectronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (
5、PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/st
6、atus.asp If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photoc
7、opying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 20
8、16. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks regi
9、stered and owned by the GSM Association. ETSI ETSI TS 123 087 V13.0.0 (2016-01)23GPP TS 23.087 version 13.0.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if
10、any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available
11、 on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or
12、 may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identit
13、ies. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “sh
14、ould not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI
15、TS 123 087 V13.0.0 (2016-01)33GPP TS 23.087 version 13.0.0 Release 13Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g31 Scope 6g32 References 6g33 Definitions and abbreviations . 6g33.1 Definitions 6g33.2 Abbreviations . 7g34 General . 7g34.1 Activation
16、 of UUS components 7g34.1.1 Implicit request . 7g34.1.2 Explicit request . 8g34.1.3 UUS required option . 8g35 Handling of User-to-user signalling . 8g35.1 Timers 8g35.2 Information flows of UUS services 9g35.2.1 Service 1 (UUS1) 9g35.2.1.1 Flow control 9g35.2.1.2 Information flows 10g35.2.1.2.1 Imp
17、licit activation 11g35.2.1.2.2 Explicit activation 12g35.2.2 Service 2 (UUS2) 13g35.2.2.1 Flow control 13g35.2.2.2 Information flows 13g35.2.3 Service 3 (UUS3) 15g35.2.3.1 Flow control 15g35.2.3.2 Information flows 16g35.3 Messages and their contents . 19g35.3.1 Information elements used in the mess
18、ages 19g35.3.2 Messages between MS and MSC 19g35.3.3 Messages between MSC and VLR (B interface) 20g35.3.4 Messages between MSC MSC (E interface) 20g36 Interaction with other supplementary services . 21g36.1 Call forwarding unconditional (CFU) 21g36.2 Call forwarding on mobile subscriber busy (CFB) .
19、 21g36.3 Call forwarding on no reply (CFNRy) . 21g36.4 Call forwarding on mobile subscriber not reachable (CFNRc) 21g36.5 Call waiting (CW) 21g36.6 Call hold (HOLD) 22g36.7 Completion of calls to busy subscribers (CCBS) . 22g36.8 Explicit call transfer (ECT) 22g36.9 Multi party service (MPTY) . 22g3
20、6.10 Advice of charge (AoC) . 22g36.11 Barring of outgoing calls (BAOC) . 22g36.12 Barring of outgoing international calls (BOIC) 22g36.13 Barring of outgoing international calls except those directed to the home PLMN country (BOIC-exHC) 22g36.14 Barring of incoming calls (BAIC) 22g36.15 Barring of
21、incoming calls when roaming outside the home PLMN country (BIC-Roam) . 22g36.16 Call deflection (CD) . 23g37 Interaction with other network features 23g3ETSI ETSI TS 123 087 V13.0.0 (2016-01)43GPP TS 23.087 version 13.0.0 Release 137.1 Customised Applications for Mobile network Enhanced Logic (CAMEL
22、) . 23g37.2 Support for Optimal Routeing(SOR) 23g38 Interworking with other networks 23g38.1 Interworking with GSM PLMN/ISDN network supporting only a maximum User-user information element length of 35 octets . 23g38.2 Interworking with non-ISDN network . 23g39 Network entity functions 24g39.1 Origi
23、nating network processes . 24g39.1.1 Procedures in MSC . 24g39.1.2 Procedures in VLR 28g39.2 Terminating network processes 29g39.2.1 Procedures in GMSC 29g39.2.2 Procedures in MSC . 30g39.3 Procedures common in serving and remote networks 36g39.4 Processes used during Active Call . 46g39.4.1 Process
24、 and procedures in serving MSC . 46g39.4.2 Process and procedures in serving VLR . 52g39.4.3 Process and procedures in remote MSC . 53g310 Information stored in the HLR and in the VLR . 57g310.1 Information stored in the HLR . 57g310.2 Transfer of information from HLR to VLR 57g310.3 Information sto
25、red in the VLR . 57g311 State transition model . 57g312 Handover 57g3Annex A (informative): Change history . 58g3History 59g3ETSI ETSI TS 123 087 V13.0.0 (2016-01)53GPP TS 23.087 version 13.0.0 Release 13Foreword This Technical Specification (TS) has been produced by the 3rdGeneration Partnership Pr
26、oject (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in v
27、ersion number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corre
28、ctions, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 123 087 V13.0.0 (2016-01)63GPP TS 23.087 version 13.0.0 Release 131 Scope The present document gives the stage 2 description of the User-to-User signalling suppleme
29、ntary services. The User-to-user supplementary service is divided into 3 different services: - Service 1 (UUS1) - Service 2 (UUS2) - Service 3 (UUS3) 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. Referenc
30、es are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM docu
31、ment), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TS 21.905: “3G Vocabulary“. 2 3GPP TS 22.087: “User-to-user signalling (UUS); Stage 1“. 3 3GPP TS 23.018: “Basic Call Handling Technical Realization“. 4 3GPP T
32、S 23.078: “CAMEL Stage 2“. 5 3GPP TS 23.079: “Support for Optimal Routeing (SOR) Technical Realization“. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the following terms and definitions apply. Burst parameter: parameter indicating the absolute maximum num
33、ber of UUS 3 service related user information messages that can be sent at intervals indicated by the value of timer T2-UUS3 Remote network: network of the remote subscriber Remote subscriber: for service 1 and 2 the remote subscriber is the called party of a call to which the served subscriber acti
34、vates the UUS supplementary service. For service 3 the remote subscriber can be either the called or the calling party of an established call to whom the use of the UUS supplementary service is requested by the served subscriber Served subscriber: subscriber who has a provision of the UUS supplement
35、ary service and who activates the UUS supplementary service. For service 1 and 2 the served subscriber is always the calling subscriber, for service 3 either the calling or the called subscriber can be the served subscriber Serving network: network of the served subscriber User-to-User Information (
36、UUI): information transferred by using the UUS supplementary service ETSI ETSI TS 123 087 V13.0.0 (2016-01)73GPP TS 23.087 version 13.0.0 Release 13UUS Service: UUS services (Service 1, 2 and 3) are components of the UUS supplementary service. If the UUS supplementary service is provided to a subscr
37、iber, he can handle the UUS services independently within a call 3.2 Abbreviations For the purposes of the present document, the following abbreviations apply: ACM Address Complete Message ANM ANswer Message CON CONnectCPG Call ProGress IAM Initial Address Message MS Mobile Station REL RELease SIFOC
38、 Send Info For Outgoing Call SRI Send Routing Info UUI User-to-User Information UUS User-to-User SignallingUUS1 User-to-User Signalling Service 1 UUS2 User-to-User Signalling Service 2 UUS3 User-to-User Signalling Service 3 Further GSM related abbreviations are listed in GSM 01.04. 4 General The UUS
39、 supplementary service allows the transfer of UUI to a remote subscriber over the signalling channel in association with a call to this subscriber. The UUS supplementary service is divided in Service 1, Service 2 and Service 3. The UUS Service 1 allows the transfer of UUI embedded within Call Contro
40、l messages. The UUS Service 2 allows the transfer of UUI with a specific User-to-user message after the served subscriber has received an address complete indication and prior to the answer indication from the B-side. The UUS Service 3 allows the transfer of UUI with a specific User-to-user message
41、during an active call. For the use of the UUS supplementary service in GSM PLMNs the support of UUS capabilities within the inter-exchange signalling system (e.g. ISUP) is necessary. However this is out of scope of the present document. 4.1 Activation of UUS components If any of the UUS Services 1,
42、2 or 3 shall be used within a call, the UUS capabilities have to be activated by the served subscriber either when initiating this outgoing call (Service 1, 2 and 3) or during an established call (Service 3). The UUS capabilities for a call can be requested by means of an implicit request or an expl
43、icit request. UUS Service 1 can be requested either implicitly or explicitly. Service 2 and 3 can only be requested explicitly. 4.1.1 Implicit request The UUS1 service is activated implicitly by the presence of UUI in the set-up request from the mobile station. The network shall transfer the receive
44、d UUI transparently to the B-side. For the purpose of UUS service 1 implicitly requested, no explicit check for the availability of UUS capabilities at the destination network has to be performed by the originating network. If the calling subscriber has UUS 1 provisioned and implicitly requested, th
45、e network shall transfer all UUI contained in call control messages. ETSI ETSI TS 123 087 V13.0.0 (2016-01)83GPP TS 23.087 version 13.0.0 Release 13If the calling subscriber has UUS1 not provisioned, the contained UUI shall be discarded by the serving MSC. The call shall be established without furth
46、er restrictions. The served subscriber shall not be informed whether the implicit request was successful or not. 4.1.2 Explicit request Any UUS Service can be explicitly activated by the served subscriber within the set-up request initiating a mobile originated call. In addition UUS Service 3 can be
47、 activated during an established call with a Facility message. A UUS Service 1 request can be accompanied by appropriate UUI. The network shall check for the availability of UUS capabilities for the call by passing the UUS request and the eventually accompanied UUI to the remote side. If a UUS Servi
48、ce is available for the call an appropriate “UUS provided“ indication for this UUS Service shall be sent within the first backward message from the remote side. A UUS Service shall not be activated for the call if a “UUS not provided“ indication or no indication about the availability of this UUS Se
49、rvice is received from the remote side. Service 3 can be explicitly activated during an active call by both parties. This may lead to a collision of activation requests. The collision of activation requests occurs when there is an outstanding request for service 3 and a subsequent request is received from the remote user. The entity (user or network) that observes the collision shall reject the second request with Facility message. This leads to the rejection of both requests. 4.1.3 UUS required option As an option at call set-up the served subscriber
