1、 ETSI TS 1Universal Mobile TelUTRA repeater ra(3GPP TS 25.1TECHNICAL SPECIFICATION125 106 V13.0.0 (2016elecommunications System (radio transmission and recep.106 version 13.0.0 Release 1316-01) (UMTS); eption 13) ETSI ETSI TS 125 106 V13.0.0 (2016-01)13GPP TS 25.106 version 13.0.0 Release 13Referenc
2、e RTS/TSGR-0425106vd00 Keywords UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The presen
3、t document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI.
4、 In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the
5、 document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: https:/portal
6、.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified
7、 without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of i
8、ts Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 125 106 V13.0.0 (2016-01)23GPP TS 25.106 version 13.0.0 Release 13Intel
9、lectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Righ
10、ts (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, ha
11、s been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ET
12、SI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM,
13、 UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the
14、ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 125 106 V13.0.0 (2016-01)33GPP TS 25.106 version 13.0.0 Release 13Contents Intellectual Property Rights 2g3Foreword . 2g3M
15、odal verbs terminology 2g3Foreword . 5g31 Scope 6g32 References 6g33 Definitions, symbols and abbreviations . 6g33.1 Definitions 6g33.2 Symbols 7g33.3 Abbreviations . 7g34 General . 7g34.1 Relationship between Minimum Requirements and Test Requirements 7g34.2 Regional requirements 8g35 Frequency ban
16、ds and channel arrangement 9g35.1 Frequency bands . 9g35.2 TX - RX frequency separation . 9g35.3 Channel arrangement 10g35.3.1 Channel spacing 10g35.3.2 Channel raster . 10g35.3.3 Channel number 10g36 Output power 12g36.1 Maximum output power . 13g36.1.1 Minimum Requirements . 13g37 Frequency stabil
17、ity . 13g37.1 Minimum requirement 13g38 Out of band gain . 13g38.1 Minimum requirement 13g39 Unwanted emission 14g39.1 Out of band emission 14g39.1.1 Void 14g39.1.2 Operating band unwanted emissions 14g39.1.3. Protection of the BS receiver in the operating band . 19g39.1.3.1 Minimum Requirement . 19
18、g39.1.4 Co-existence with services in adjacent frequency bands 19g39.1.4.1 Minimum requirement 19g39.2 Spurious emissions . 19g39.2.1 General Requirements . 20g39.2.1.1 Minimum Requirement (Category A) . 20g39.2.1.2 Minimum Requirement (Category B) . 20g39.2.2 Void 21g39.2.3 Co-existence with other
19、systems in the same geographical area 21g39.2.3.1 Minimum Requirements 22g39.2.4 Co-existence with co-located and co-sited Base Stations . 25g39.2.4.1 Minimum Requirements 26g39.2.5 Co-existence with PHS . 28g39.2.5.1 Minimum Requirement . 28g39.2.6 Co-existence with UTRA-TDD and/or E-UTRA TDD 29g39
20、.2.6.1 Operation in the same geographic area . 29g39.2.6.1.1 Minimum Requirement . 29g39.2.6.2 Co-located Repeaters and UTRA-TDD and/or E-UTRA TDD base stations . 31g3ETSI ETSI TS 125 106 V13.0.0 (2016-01)43GPP TS 25.106 version 13.0.0 Release 139.2.6.2.1 Minimum Requirement . 31g39.2.7 Void 33g39.2
21、.8 Protection of public safety operations . 33g39.2.8.1 Minimum Requirement . 33g310 Modulation accuracy 33g310.1 Error Vector Magnitude . 33g310.1.1 Minimum requirement 34g310.2 Peak code domain error 34g310.2.1 Minimum requirement 34g310.3 Relative Code Domain Error (RCDE) for 64QAM modulation . 3
22、4g310.3.1 Minimum requirement 34g311 Input Intermodulation . 34g311.1 General Requirement 34g311.1.1 Minimum requirement 34g311.2 Co-location with BS in other systems 35g311.2.1 Minimum requirements - Co-location with GSM, DCS, PCS, UTRA FDD and/or E-UTRA FDD . 35g311.2.2 Minimum Requirement - Co-lo
23、cation with UTRA-TDD and/or E-UTRA TDD 38g311.3 Co-existence with other systems 39g311.3.1 Minimum requirements . 39g312 Output intermodulation 42g312.1 Minimum requirement 42g313 Adjacent Channel Rejection Ratio (ACRR) . 43g313.1 Definitions and applicability 43g313.2 Minimum Requirements . 43g3Ann
24、ex A (informative): Change History 44g3History 46g3ETSI ETSI TS 125 106 V13.0.0 (2016-01)53GPP TS 25.106 version 13.0.0 Release 13Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing wo
25、rk within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented t
26、o TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only chan
27、ges have been incorporated in the document ETSI ETSI TS 125 106 V13.0.0 (2016-01)63GPP TS 25.106 version 13.0.0 Release 131 Scope The present document establishes the minimum radio frequency performance of UTRA FDD repeaters. 2 References The following documents contain provisions which, through ref
28、erence in this text, constitute provisions of the present document. - References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. - For a specific reference, subsequent revisions do not apply. - For a non-specific reference, the latest ve
29、rsion applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 ITU-R Recommendation SM.329: “Unwanted emissions in the spurious domain“. 2 3GPP T
30、S 25.143: “UTRA Repeater Conformance Testing“. 3 3GPP TS 25.113: “Base Station and Repeater Electromagnetic Compatibility“. 4 ETSI ETR 273-1-2: “Electromagnetic compatibility and Radio spectrum Matters (ERM); Improvement of radiated methods of measurement (using test sites) and evaluation of the cor
31、responding measurement uncertainties; Part 1: Uncertainties in the measurement of mobile radio equipment characteristics; Sub-part 2: Examples and annexes“. 5 3GPP TR 25.942: “RF System Scenarios“. 6 3GPP TS 25.104: “UTRA(BS) FDD; Radio transmission and Reception“. 7 CEPT ECC Decision (13)03, “The h
32、armonised use of the frequency band 1452-1492 MHz for Mobile/Fixed Communications Networks Supplemental Downlink (MFCN SDL) “. 8 3GPP TS 36.104: “Evolved Universal Terrestrial Radio Access (E-UTRA); Base Station (BS) radio transmission and reception“. 3 Definitions, symbols and abbreviations 3.1 Def
33、initions For the purposes of the present document, the following terms and definitions apply: Donor coupling loss: is the coupling loss between the repeater and the donor base station. Down-link: Signal path where base station transmits and mobile receives. Operating band: the frequency range in whi
34、ch UTRA FDD operates, that is defined with a specific set of technical requirements. NOTE 1: The operating band(s) for an UTRA Repeater is declared by the manufacturer according to the designations in clause 5.1, Table 5.1. NOTE 2: Unless specified, operating band refers to the uplink operating band
35、 and downlink operating band. ETSI ETSI TS 125 106 V13.0.0 (2016-01)73GPP TS 25.106 version 13.0.0 Release 13Pass band: The frequency range in which the repeater operates in with operational configuration. This frequency range can correspond to one or several consecutive nominal 5 MHz channels. If t
36、hey are not consecutive each subset of channels shall be considered as an individual pass band. A repeater can have one or several pass bands. Repeater: A device that receives, amplifies and transmits the radiated or conducted RF carrier both in the down-link direction (from the base station to the
37、mobile area) and in the up-link direction (from the mobile to the base station). In operating bands specified with only down-link or up-link, only the up-link or down-link as specified for the operating band is repeated. Up-link: Signal path where mobile transmits and base station receives. 3.2 Symb
38、ols (void) 3.3 Abbreviations For the purposes of the present document, the following abbreviations apply: BS Base Transceiver Station DL Down Link (forward link) DTT Digital Terrestrial Television EVM Error Vector Magnitude EIRP Effective Isotropic Radiated Power FDD Frequency Division Duplex FFS Fo
39、r Further Study IMT2000 International Mobile Telecommunication-2000 ITU International Telecommunication Union RCDE Relative Code Domain Error. RF Radio Frequency UARFCN UTRA Absolute Radio Frequency Channel Number UL Up Link (reverse link) UMTS Universal Mobile Telecommunication System UTRA Universa
40、l Terrestrial Radio Access WCDMA Wide band Code Division Multiple Access 4 General This specification applies only to UTRA-FDD repeaters. Unless otherwise stated, all requirements in this specification apply to both the up-link and down-link directions, where applicable. 4.1 Relationship between Min
41、imum Requirements and Test Requirements The Minimum Requirements given in this specification make no allowance for measurement uncertainty. The repeater test specification 25.143 section 5 2 defines Test Tolerances. These Test Tolerances are individually calculated for each test. The Test Tolerances
42、 are used to relax the Minimum Requirements in this specification to create Test Requirements. The measurement results returned by the Test System are compared - without any modification - against the Test Requirements as defined by the shared risk principle. The Shared Risk principle is defined in
43、ETR 273 Part 1 sub-part 2 section 6.5 4. ETSI ETSI TS 125 106 V13.0.0 (2016-01)83GPP TS 25.106 version 13.0.0 Release 134.2 Regional requirements Some requirements in TS 25.106 may only apply in certain regions. Table 4.1 lists all requirements that may be applied differently in different regions. T
44、able 4.1: List of regional requirements. Clause number Requirement Comments 5.1 Frequency bands Some bands may be applied regionally. 5.2 TX RX frequency separation The requirement is applied according to which frequency bands in Clause 5.1 that are supported by the Repeater. 5.3 Channel arrangement
45、 The requirement is applied according to what frequency bands in clause 5.1 that are supported by the Repeater. 6.1 Maximum output power In certain regions, the minimum requirement for normal conditions may apply also for some conditions outside the ranges of conditions defined as normal. 9.1. 2 Ope
46、rating band unwanted emissions The mask specified may be mandatory in certain regions. In other regions this mask may not be applied. Additional spectrum protection may apply regionally. 9.2.1.1 Spurious emissions (Category A) These requirements shall be met in cases where Category A limits for spur
47、ious emissions, as defined in ITU-R Recommendation SM.329 1, are applied. 9.2.1.2 Spurious emissions (Category B) These requirements shall be met in cases where Category B limits for spurious emissions, as defined in ITU-R Recommendation SM.329 1, are applied. 9.2.3 Spurious emissions: Co-existence
48、with other systems in the same geographical area These requirements may apply in geographic areas in which both UTRA FDD Repeater and GSM900 DCS1800, PCS1900, GSM850 and/or UTRA FDD operating in another frequency band are deployed. 9.2.4 Spurious emissions: Co-existence with co-located and co-sited
49、base stations These requirements may be applied for the protection of other BS receivers when GSM900 DCS1800, PCS1900, GSM850 and/or FDD BS operating in another frequency band are co-located with a UTRA FDD Repeater. 9.2.5 Spurious emissions: Co-existence with PHS This requirement may be applied for the protection of PHS in geographic areas in which both PHS and UTRA FDD Repeaters are deployed. 9.2.6.1 Spurious emissions: Co-existence with UTRA-TDD and/or E-UTRA TDD - Operation in the same geographic area This requirement may be applied for the prote
