1、 ETSI TS 125 141 V14.1.0 (2017-05) Universal Mobile Telecommunications System (UMTS); Base Station (BS) conformance testing (FDD) (3GPP TS 25.141 version 14.1.0 Release 14) TECHNICAL SPECIFICATION ETSI ETSI TS 125 141 V14.1.0 (2017-05)13GPP TS 25.141 version 14.1.0 Release 14Reference RTS/TSGR-04251
2、41ve10 Keywords UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can b
3、e downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
4、existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be
5、 subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.
6、org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified witho
7、ut the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Mem
8、bers. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 125 141 V14.1.0 (2017
9、-05)23GPP TS 25.141 version 14.1.0 Release 14Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be fou
10、nd in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Po
11、licy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Te
12、chnical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding E
13、TSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to
14、 be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 125 141 V14.1.0 (2017-05)33GPP TS 25.141 version 14.1.0 Release 14Conten
15、ts Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 15g31 Scope 16g32 References 16g33 Definitions and abbreviations . 17g33.1 Definitions 17g33.2 Symbols 19g33.3 Abbreviations . 20g33.4 Radio Frequency bands 21g33.4.1 Frequency bands . 21g33.4.2 TX-RX frequency se
16、paration 24g33.5 Channel arrangement 25g33.5.1 Channel spacing 25g33.5.2 Channel raster . 25g33.5.3 Channel number 25g34 General test conditions and declarations 27g34.1 Acceptable uncertainty of Test System 28g34.1.1 Measurement of test environments . 28g34.1.2 Measurement of transmitter 29g34.1.3
17、Measurement of receiver 32g34.1.4 Measurement of performance requirement . 33g34.2 Test Tolerances (informative) 35g34.2.1 Transmitter 35g34.2.2 Receiver 36g34.2.3 Performance requirement 36g34.2.4 RRM measurements 36g34.3 Interpretation of measurement results 37g34.3A Base station classes 37g34.4 T
18、est environments 37g34.4.1 Normal test environment 37g34.4.2 Extreme test environment . 38g34.4.2.1 Extreme temperature . 38g34.4.3 Vibration . 38g34.4.4 Power supply 38g34.4.5 Definition of Additive White Gaussian Noise (AWGN) Interferer 39g34.5 Selection of configurations for testing 39g34.6 BS Co
19、nfigurations 39g34.6.1 Receiver diversity . 39g34.6.2 Duplexers 39g34.6.3 Power supply options 40g34.6.4 Ancillary RF amplifiers 40g34.6.5 BS using antenna arrays 41g34.6.5.1 Receiver tests 41g34.6.5.2 Transmitter tests 41g34.6.6 Transmit diversity and MIMO transmission . 42g34.6.7 BS with integrate
20、d Iuant BS modem 42g34.6.8 BS with Virtual Antenna Mapping . 42g34.7 Regional requirements 43g34.8 Specified frequency range 46g34.8.1 Base Station RF Bandwidth position for non-single carrier testing 46g34.9 Applicability of requirements . 47g34.10 Requirements for contiguous and non-contiguous spe
21、ctrum 47g3ETSI ETSI TS 125 141 V14.1.0 (2017-05)43GPP TS 25.141 version 14.1.0 Release 144.11 Manufacturers declarations of regional and optional requirements 47g34.11.1 Operating band and frequency range 47g34.11.2 Spurious emissions category . 47g34.11.3 Additional out of band emissions . 48g34.11
22、.4 Co-existence with other systems . 48g34.11.5 Co-location with other base stations . 48g34.11.6 Manufacturers declarations of supported RF configurations . 48g34.12 Test configuration for multi-carrier operations 49g34.12.1 UTC1: Contiguous spectrum operation test configuration . 50g34.12.1.1 UTC1
23、 power allocation . 50g34.12.2 UTC2: Non-contiguous spectrum operation test configuration 50g34.12.2.1 UTC2 power allocation . 50g34.12.3 Multi-band operation test configurations 50g34.12.3.1 UTC3: Multi-band test configuration for full carrier allocation 50g34.12.3.1.1 UTC3 power allocation . 51g34
24、.12.3.2 UTC4: Multi-band test configuration with high PSD per carrier 51g34.12.3.2.1 UTC4 power allocation . 52g34.12.4 Applicability of test configurations 52g34.13 Requirements for BS capable of multi-band operation 55g35 Format and interpretation of tests . 56g36 Transmitter . 56g36.1 General . 5
25、6g36.1.1 Test Models 57g36.1.1.1 Test Model 1 TM1 . 57g36.1.1.2 Test Model 2 TM2 . 61g36.1.1.3 Test Model 3 TM3 . 61g36.1.1.4 Test Model 4 TM4 . 62g36.1.1.4A Test Model 5 TM5 . 63g36.1.1.4B Test Model 6 TM6 . 64g36.1.1.5 DPCH Structure of the Downlink Test Models . 66g36.1.1.6 Common channel Structu
26、re of the Downlink Test Models . 67g36.1.1.6.1 P-CCPCH 67g36.1.1.6.2 PICH 67g36.1.1.6.3 Primary scrambling code and SCH 67g36.1.1.6.4 S-CCPCH containing PCH 67g36.1.1.7 HS-PDSCH Structure of the Downlink TM5 68g36.1.1.8 HS-SCCH Structure of the Downlink Test Models 5 and 6 68g36.1.1.9 HS-PDSCH Struc
27、ture of the Downlink TM6 68g36.2 Base station output power 68g36.2.1 Base station maximum output power 68g36.2.1.1 Definition and applicability . 68g36.2.1.2 Minimum Requirement . 69g36.2.1.3 Test purpose 69g36.2.1.4 Method of test . 69g36.2.1.4.1 Initial conditions 69g36.2.1.4.2 Procedure . 69g36.2
28、.1.5 Test Requirements . 70g36.2.2 Primary CPICH power accuracy . 70g36.2.2.1 Definition and applicability . 70g36.2.2.2 Minimum Requirement . 70g36.2.2.3 Test purpose 70g36.2.2.4 Method of test . 70g36.2.2.4.1 Initial conditions 70g36.2.2.4.2 Procedure . 70g36.2.2.5 Test Requirement 71g36.2.3 Secon
29、dary CPICH power offset accuracy . 71g36.2.3.1 Definition and applicability . 71g36.2.3.2 Minimum Requirement . 71g36.2.3.3 Test purpose 71g36.2.3.4 Method of test for MIMO mode 71g3ETSI ETSI TS 125 141 V14.1.0 (2017-05)53GPP TS 25.141 version 14.1.0 Release 146.2.3.4.1 Initial conditions 71g36.2.3.
30、4.2 Procedure . 71g36.2.3.4A Method of test for MIMO mode with four transmit antennas . 72g36.2.3.4A.1 Initial conditions 72g36.2.3.4A.2 Procedure . 72g36.2.3.5 Test Requirement for MIMO mode 72g36.2.3.5A Test Requirement for MIMO mode with four transmit antennas 72g36.3 Frequency error 73g36.3.1 De
31、finition and applicability 73g36.3.2 Minimum Requirement . 73g36.3.3 Test purpose 73g36.3.4 Method of test . 73g36.3.5 Test requirement . 73g36.4 Output power dynamics 73g36.4.1 Inner loop power control . 73g36.4.2 Power control steps . 73g36.4.2.1 Definition and applicability . 74g36.4.2.2 Minimum
32、Requirement . 74g36.4.2.3 Test purpose 74g36.4.2.4 Method of test . 74g36.4.2.4.1 Initial conditions 74g36.4.2.4.2 Procedure . 74g36.4.2.5 Test requirement . 75g36.4.3 Power control dynamic range . 75g36.4.3.1 Definition and applicability . 75g36.4.3.2 Minimum Requirement . 75g36.4.3.3 Test purpose
33、75g36.4.3.4 Method of test . 75g36.4.3.4.1 Initial conditions 75g36.4.3.4.2 Procedure . 76g36.4.3.5 Test requirement . 76g36.4.4 Total power dynamic range 76g36.4.4.1 Definition and applicability . 76g36.4.4.2 Minimum Requirement . 76g36.4.4.3 Test purpose 76g36.4.4.4 Method of test . 76g36.4.4.4.1
34、Initial Conditions . 76g36.4.4.4.2 Procedure . 77g36.4.4.5 Test requirement . 77g36.4.5 IPDL time mask 77g36.4.5.1 Definition and applicability . 77g36.4.5.2 Minimum Requirement . 77g36.4.5.3 Test purpose 77g36.4.5.4 Method of test . 77g36.4.5.4.1 Initial conditions 77g36.4.5.4.2 Procedure . 78g36.4
35、.5.5 Test Requirements . 78g36.4.6 Home base station output power for adjacent channel protection . 78g36.4.6.1 Definition and applicability . 78g36.4.6.2 Minimum Requirement . 79g36.4.6.3 Test purpose 79g36.4.6.4 Method of test . 79g36.4.6.4.1 Initial conditions 79g36.4.6.4.2 Procedure . 80g36.4.6.
36、5 Test Requirements . 80g36.5 Output RF spectrum emissions . 80g36.5.1 Occupied bandwidth . 80g36.5.1.1 Definition and applicability . 80g36.5.1.2 Minimum Requirements 81g36.5.1.3 Test purpose 81g36.5.1.4 Method of test . 81g36.5.1.4.1 Initial conditions 81g3ETSI ETSI TS 125 141 V14.1.0 (2017-05)63G
37、PP TS 25.141 version 14.1.0 Release 146.5.1.4.2 Procedure . 81g36.5.1.5 Test requirements 82g36.5.2 Out of band emission 82g36.5.2.1 Spectrum emission mask . 82g36.5.2.1.1 Definitions and applicability . 82g36.5.2.1.2 Minimum Requirements 82g36.5.2.1.3 Test purpose 82g36.5.2.1.4 Method of test 82g36
38、.5.2.1.4.1 Initial conditions 82g36.5.2.1.4.2 Procedures . 83g36.5.2.1.5 Test requirements 83g36.5.2.2 Adjacent Channel Leakage power Ratio (ACLR) . 91g36.5.2.2.1 Definition and applicability . 91g36.5.2.2.2 Minimum Requirement . 91g36.5.2.2.3 Test purpose 91g36.5.2.2.4 Method of test 91g36.5.2.2.4.
39、1 Initial conditions 91g36.5.2.2.4.2 Procedure . 92g36.5.2.2.5 Test Requirement. 92g36.5.2.2.6 Cumulative ACLR test requirement in non-contiguous spectrum or multiple-bands 93g36.5.3 Spurious emissions . 94g36.5.3.1 Definition and applicability . 94g36.5.3.2 (void) . 94g36.5.3.3 (void) . 94g36.5.3.4
40、 Minimum Requirements 94g36.5.3.5 Test purpose 95g36.5.3.6 Method of Test 95g36.5.3.6.1 Initial conditions 95g36.5.3.6.2 Procedure . 96g36.5.3.7 Test requirements 96g36.5.3.7.1 Spurious emissions (Category A) 96g36.5.3.7.2 Spurious emissions (Category B) 96g36.5.3.7.3 Protection of the BS receiver o
41、f own or different BS 97g36.5.3.7.4 Co-existence with other systems in the same geographical area . 99g36.5.3.7.5 Co-existence with co-located and co-sited base stations . 104g36.5.3.7.6 Co-existence with PHS 114g36.5.3.7.7 Co-existence with services in adjacent frequency bands . 114g36.5.3.7.8 Void
42、 . 115g36.5.3.7.8.1 Void . 115g36.5.3.7.8.2 Void . 115g36.5.3.7.9 Protection of Public Safety Operations 115g36.5.3.7.10 Co-existence with Home BS operating in other bands 115g36.6 Transmitter intermodulation . 118g36.6.1 Definition and applicability 118g36.6.2 Minimum Requirement . 118g36.6.3 Test
43、purpose 118g36.6.4 Method of test . 118g36.6.4.1 Initial conditions . 118g36.6.4.2 Procedures . 119g36.6.5 Test Requirements 119g36.7 Transmit modulation 120g36.7.1 Error Vector Magnitude 120g36.7.1.1 Definition and applicability . 120g36.7.1.2 Minimum Requirement . 120g36.7.1.3 Test Purpose 120g36.
44、7.1.4 Method of Test 120g36.7.1.4.1 Initial Conditions . 120g36.7.1.4.2 Procedure . 120g36.7.1.5 Test Requirement 121g36.7.2 Peak Code Domain Error 121g36.7.2.1 Definition and applicability . 121g36.7.2.2 Minimum requirement 121g3ETSI ETSI TS 125 141 V14.1.0 (2017-05)73GPP TS 25.141 version 14.1.0 R
45、elease 146.7.2.3 Test Purpose 121g36.7.2.4 Method of test . 121g36.7.2.4.1 Initial conditions 121g36.7.2.4.2 Procedure . 122g36.7.2.5 Test requirement . 122g36.7.3 Time alignment error 122g36.7.3.1 Definition and applicability . 122g36.7.3.2 Minimum Requirement . 122g36.7.3.3 Test Purpose 122g36.7.3
46、.4 Method of Test 122g36.7.3.4.1 Initial Conditions . 122g36.7.3.4.2 Procedure . 123g36.7.3.5 Test Requirement 123g36.7.4 Relative Code Domain Error 123g36.7.4.1 Definition and applicability . 123g36.7.4.2 Minimum requirement 124g36.7.4.3 Test Purpose 124g36.7.4.4 Method of test . 124g36.7.4.4.1 Ini
47、tial conditions 124g36.7.4.4.2 Procedure . 124g36.7.4.5 Test requirement . 124g37 Receiver characteristics 124g37.1 General . 124g37.2 Reference sensitivity level 125g37.2.1 Definition and applicability 125g37.2.2 Minimum Requirement . 125g37.2.3 Test purpose 125g37.2.4 Method of testing 126g37.2.4.
48、1 Initial conditions . 126g37.2.4.2 Procedure 126g37.2.5 Test requirement . 126g37.3 Dynamic range . 127g37.3.1 Definition and applicability 127g37.3.2 Minimum Requirement . 127g37.3.3 Test purpose 127g37.3.4 Method of test . 127g37.3.4.1 Initial conditions . 127g37.3.4.2 Procedure 127g37.3.5 Test R
49、equirements 127g37.4 Adjacent Channel Selectivity (ACS) 128g37.4.1 Definition and applicability 128g37.4.2 Minimum Requirement . 128g37.4.3 Test purpose 128g37.4.4 Method of test . 128g37.4.4.1 Initial conditions . 128g37.4.4.2 Procedure 128g37.4.5 Test Requirements 129g37.5 Blocking characteristics . 129g37.5.1 Definition and applicability 129g37.5.2 Minimum Requirements . 129g37.5.3 Test purpose 130g37.5.4 Method of test . 130g37.5.4.1 Initial conditions . 130g37.5.4.2 Procedure 131g37.5.5 Test Requirements 131g37.6 Intermodulation characteristics 150g37.6.1 D
