1、 ETSI TS 134 109 V14.0.0 (2017-04) Universal Mobile Telecommunications System (UMTS); Terminal logical test interface; Special conformance testing functions (3GPP TS 34.109 version 14.0.0 Release 14) TECHNICAL SPECIFICATION ETSI ETSI TS 134 109 V14.0.0 (2017-04)13GPP TS 34.109 version 14.0.0 Release
2、 14Reference RTS/TSGR-0234109ve00 Keywords UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice
3、 The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorizati
4、on of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be awa
5、re that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following se
6、rvices: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version
7、shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered
8、 for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ET
9、SI TS 134 109 V14.0.0 (2017-04)23GPP TS 34.109 version 14.0.0 Release 14Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and
10、non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/).
11、Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present
12、 document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being refere
13、nces to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“
14、, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 134 109 V14.0.0 (2017-04)33GPP TS 34.109 vers
15、ion 14.0.0 Release 14Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g31 Scope 6g32 References 6g33 Definitions and abbreviations . 7g33.1 Definitions 7g33.2 Abbreviations . 7g34 UE conformance test functions 7g34.1 General description. 7g34.2 UE radio b
16、earer test mode 8g34.3 UE test loop 9g34.4 EMMI . 9g35 Test Control (TC) protocol procedures and test loop operation . 9 g35.1 General description. 9g35.2 UE radio bearer test mode procedures 13g35.2.1 Activate UE radio bearer test mode 13g35.2.1.1 General 14g35.2.1.2 Initiation 14g35.2.1.3 Receptio
17、n of ACTIVATE RB TEST MODE message by UE 14g35.2.1.4 Reception of ACTIVATE RB TEST MODE COMPLETE message by SS . 14g35.2.1.5 TT01 timeout. 14g35.2.2 Deactivate UE radio bearer test mode. 15g35.2.2.1 General 15g35.2.2.2 Initiation 15g35.2.2.3 Reception of DEACTIVATE RB TEST MODE message by UE . 15g35
18、.2.2.4 Reception of DEACTIVATE RB TEST MODE COMPLETE message by SS 15g35.2.2.5 TT01 timeout. 15g35.3 UE test loop procedures . 15g35.3.1 General 15g35.3.2 Close UE test loop 16g35.3.2.1 General 16g35.3.2.2 Initiation 16g35.3.2.3 Reception of CLOSE UE TEST LOOP message by the UE . 17g35.3.2.4 Recepti
19、on of CLOSE UE TEST LOOP COMPLETE message by the SS 17g35.3.2.5 TT01 timeout. 17g35.3.2.6 UE test loop mode 1 operation 17g35.3.2.6.1 Loopback of PDCP SDUs . 17g35.3.2.6.2 Loopback of RLC SDUs 18g35.3.2.7 UE test loop mode 2 operation 19g35.3.2.7.1 Loopback of downlink transport block data and downl
20、ink CRC . 20g35.3.2.8 Void. 21g35.3.2.8a UE Test Loop Mode 3 Operation 21g35.3.2.8b UE test loop mode 4 operation 21g35.3.2.8b.1 Loopback of IP PDUs 22g35.3.2.9 Loopback delay requirement . 22g35.3.2.9.1 General loopback delay requirement . 22g35.3.2.9.2 Loopback delay requirement for RLC and PDCP S
21、DUs (UE Test loop mode 1) . 24g35.3.3 Open UE test loop . 24g35.3.3.1 General 25g35.3.3.2 Initiation 25g3ETSI ETSI TS 134 109 V14.0.0 (2017-04)43GPP TS 34.109 version 14.0.0 Release 145.3.3.3 Reception of OPEN UE TEST LOOP message by the UE . 25g35.3.3.4 Reception of OPEN UE TEST LOOP COMPLETE by th
22、e SS. 25g35.3.3.5 TT01 timeout. 25g35.4 UE Positioning test mode procedures . 25g35.4.1 Reset UE Positioning Stored Information . 25g35.4.1.1 General 25g35.4.1.2 Initiation 25g35.4.1.3 Reception of RESET UE POSITIONING STORED INFORMATION message by UE 25g35.4.2 Update UE Location Information . 26g35
23、.4.2.1 General 26g35.4.2.2 Initiation 26g35.4.2.3 Reception of UPDATE UE LOCATION INFORMATION message by UE . 26g35.5 UE RLC SDU counter reporting procedure 27g35.5.1 UE TEST LOOP MODE 3 RLC SDU COUNTER REQUEST and UE TEST LOOP MODE 3 RLC SDU COUNTER RESPONSE 27g35.5.1.1 General 27g35.5.1.2 Initiati
24、on 27g35.5.1.3 Reception of UE TEST LOOP MODE 3 RLC SDU COUNTER REQUEST by the UE . 27g35.5.1.4 Reception of UE TEST LOOP MODE 3 RLC SDU COUNTER RESPONSE by the SS 27g35.5.1.5 TT01 timeout. 27g36 Message definitions and contents . 27g36.1 Timer values . 28g36.2 CLOSE UE TEST LOOP . 28g36.3 CLOSE UE
25、TEST LOOP COMPLETE . 30g36.4 OPEN UE TEST LOOP . 30g36.5 OPEN UE TEST LOOP COMPLETE . 30g36.6 ACTIVATE RB TEST MODE 31g36.7 ACTIVATE RB TEST MODE COMPLETE 31g36.8 DEACTIVATE RB TEST MODE . 31g36.9 DEACTIVATE RB TEST MODE COMPLETE . 32g36.10 RESET UE POSITIONING STORED INFORMATION 32g36.11 UE TEST LO
26、OP MODE 3 RLC SDU COUNTER REQUEST . 32g36.12 UE TEST LOOP MODE 3 RLC SDU COUNTER RESPONSE . 33g36.13 UPDATE UE LOCATION INFORMATION 33g37 Electrical Man Machine Interface (EMMI) 34g38 UICC/ME test interface 35g38.1 General description. 35g38.2 Formal aspects 35g38.3 Hardware and logical aspects of t
27、he interface 35g38.4 Mechanical characteristics of the interface. 35g3Annex A (informative): UE test loop use scenarios . 36g3A.1 Measurement of receiver characteristics (BER) using UE test loop mode 1 and RLC TM . 36g3A.1.1 Measurement of receiver characteristics (BER) - DL reference measurement ch
28、annel (12.2 kbps). 36g3A.2 Measurement of receiver performance (BLER) using UE test loop mode 1 and RLC AM . 36g3A.2.1 Measurement of receiver performance (BLER) - DL reference measurement channel (64,144,384 kbps) . 37g3A.3 Measurement of receiver performance (BLER) using UE test loop mode 2 37g3A.
29、3.1 Measurement of receiver performance (BLER) - DL reference measurement channel (12.2 kbps) . 38g3A.3.2 Measurement of receiver performance (BLER) - DL reference measurement channel (64,144 and 384 kbps) 38g3A.4 Measurement of transmitter characteristics 38g3A.5 Measurement of transmitter DTX char
30、acteristics . 39g3A.6 Using UE test loop mode 2 for testing of UE Blind Transport Format Detection (FDD mode) 39g3A.7 Using UE test loop mode 1 for protocol testing . 40g3Annex B (informative): Change history . 42g3History 43g3ETSI ETSI TS 134 109 V14.0.0 (2017-04)53GPP TS 34.109 version 14.0.0 Rele
31、ase 14Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document,
32、it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y
33、 the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 134 109 V14.0.0 (2017-04)63GPP TS 34.109 version 14.0.0 Release 141
34、 Scope The present document specifies for User Equipment (UE), in UMTS system, for FDD and TDD modes, those UE functions that are required for conformance testing purposes. For conformance tests, functions are activated via the radio interface. These functions shall be capable of being activated whe
35、n a test USIM is present. Any USIM related features such as subsidy-related UE features should also not interfere with the functions. In the loopback state, the UE shall be able to perform all functions specified in the present document except where otherwise stated; in addition however, the conform
36、ance testing functions must be operational. USIM, in general, is described in TS 31.101 7. The ME recognises the test USIM by the Administrative Data Field. Test USIM data fields are described in TS 34.108 10. The present document applies to the unit that includes the hardware to establish a connect
37、ion across the radio interface. 2 References The following documents contain provisions that, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a
38、 specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the pre
39、sent document. 1 3GPP TS 24.007: “Mobile radio interface signalling layer 3; General aspects“. 2 3GPP TS 24.008: “Mobile radio interface layer 3 specification; Core Network Protocols; Stage 3“. 3 3GPP TS 25.101: “UE Radio transmission and reception (FDD)“. 4 3GPP TS 25.102: “UTRA (UE) TDD; Radio tra
40、nsmission and reception“. 5 3GPP TS 25.331: “Radio Resource Control (RRC); protocol specification“. 6 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 7 3GPP TS 31.101: “UICC-Terminal Interface; Physical and Logical Characteristics“. 8 3GPP TS 34.121: “Terminal Conformance Specification; Radio
41、Transmission and Reception (FDD)“. 9 3GPP TS 34.122: “Terminal Conformance Specification; Radio Transmission and Reception (TDD)“. 10 3GPP TS 34.108: “Common Test Environments for User Equipment (UE) Conformance Testing“. 11 3GPP TS 25.211: “Physical channels and mapping of transport channels onto p
42、hysical channels (FDD)“. 12 3GPP TS 25.133: “Requirements for support of Radio Resource Management (FDD)“. 13 3GPP TS 44.014: “Individual equipment type requirements and interworking; Special conformance testing functions“. 14 3GPP TS 27.005: “Use of Data Terminal Equipment - Data Circuit terminatin
43、g Equipment (DTE - DCE) interface for Cell Broadcast Service (CBS)“. ETSI ETSI TS 134 109 V14.0.0 (2017-04)73GPP TS 34.109 version 14.0.0 Release 1415 3GPP TS 27.007: “AT command set for User Equipment (UE)“. 16 3GPP TS 27.060: “Mobile Stations (MS) supporting packet switched services“. 17 3GPP TS 3
44、4.123-2: “User Equipment (UE) conformance specification; Part 2: Implementation Conformance Statement (ICS) proforma specification“. 18 3GPP TS 25.306: “UE Radio Access capabilities“. 19 3GPP TS 25.322: “Radio Link Control (RLC) protocol specification“. 20 3GPP TS 23.060: “General Packet Radio Servi
45、ce (GPRS) Service Description Stage 2“. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the following terms and definitions apply: UE (User Equipment): user equipment that is under test. SS (System Simulator): test system (or equipment) that drives the test
46、process between UE, like BS (Base Station) simulator. User: test user, who handles the test and measurement process via the logical test interface. Logical Test Interface: interface which provides the logical service to interwork and to communicate between UE and System Simulator during the test of
47、a UE. TC (Test Control): UE protocol entity used by the SS to control the UE specific testing functions. 3.2 Abbreviations Abbreviations used in the present document are listed in TR 21.905 6. For the purposes of the present document, the following abbreviations apply: IP Internet Protocol LB Loop B
48、ackRAB Radio Access Bearer RB Radio Bearer SAPI Service Access Point Indicator SS System Simulator TC Test Control TFT Traffic Flow Template UICC UMTS Integrated Circuit Card UL TFT Uplink Traffic Flow Template 4 UE conformance test functions 4.1 General description The SS performs activation and de
49、activation of the conformance test functions in the UE by sending standard NAS Layer 3 messages. A specific protocol discriminator value has been defined in TS 24.007 1, subclause 11.2.3.1.1 for the UE test command messages. Figure 4.1.1 illustrates the Layer 3 protocol entity Test Control (TC) where the UE test command messages terminates. ETSI ETSI TS 134 109 V14.0.0 (2017-04)83GPP TS 34.109 version 14.0.0 Release 14NOTE: The protocol discriminator value used for the TC messages is the same as used in GSM for the MS spec
