1、 ETSI TS 1Evolved Universal TBand repeater Elect(3GPP TS 36.1TECHNICAL SPECIFICATION136 113 V13.3.0 (2017LTE; l Terrestrial Radio Access (E-Base Station (BS) ectroMagnetic Compatibility (E.113 version 13.3.0 Release 1317-01) UTRA); (EMC) 13) ETSI ETSI TS 136 113 V13.3.0 (2017-01)13GPP TS 36.113 vers
2、ion 13.3.0 Release 13Reference RTS/TSGR-0436113vd30 Keywords LTE ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88
3、 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior wr
4、itten authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present docum
5、ent should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of
6、 the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of
7、 the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks o
8、f ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 136 113 V13.3.0 (2017-01)23GPP TS
9、 36.113 version 13.3.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI S
10、R 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no inv
11、estigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Spec
12、ification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI delivera
13、bles. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpre
14、ted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 136 113 V13.3.0 (2017-01)33GPP TS 36.113 version 13.3.0 Release 13Contents Intellect
15、ual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g31 Scope 6g32 References 6g33 Definitions, symbols and abbreviations . 7g33.1 Definitions 7g33.2 Symbols 9g33.3 Abbreviations . 10g34 Test conditions . 10g34.1 General . 10g34.2 Arrangements for establishing a communication
16、 link 10g34.2.1 Multiple enclosure BS solution . 11g34.3 Narrow band responses on receivers 11g34.4 Test condition for Repeater 11g34.4.1 Arrangements for test signals for repeaters . 11g34.5 Exclusion bands 11g34.5.1 Transmitter exclusion band . 11g34.5.2 Receiver exclusion band . 12g34.6 BS test c
17、onfigurations 13g35 Performance assessment . 14g35.1 General . 14g35.2 Assessment of throughput in Downlink . 14g35.3 Assessment of throughput in Uplink 14g35.4 Ancillary equipment . 15g35.5 Repeaters 15g36 Performance Criteria 15g36.1 Performance criteria for continuous phenomena for BS 15g36.2 Per
18、formance criteria for transient phenomena for BS 16g36.3 Performance criteria for continuous phenomena for Ancillary equipment . 17g36.4 Performance criteria for transient phenomena for Ancillary equipment 18g36.5 Performance criteria for continuous phenomena for repeaters . 18g36.6 Performance crit
19、eria for transient phenomena for repeaters . 18g37 Applicability overview . 18g37.1 Emission . 18g37.2 Immunity 19g37.3 Applicability of requirements in TS 37.113 . 19g38 Emission . 20g38.1 Test configurations . 20g38.2 Radiated emission from Base station, Repeater and ancillary equipment 20g38.2.1
20、Radiated emission, Base stations and Repeater 20g38.2.1.1 Definition 21g38.2.1.2 Test method . 21g38.2.1.3 Limits 21g38.2.1.4 Interpretation of the measurement results . 22g38.2.2 Radiated emission, Ancillary equipment 22g38.2.2.1 Definition 22g38.2.2.2 Test method . 22g38.2.2.3 Limits 22g3ETSI ETSI
21、 TS 136 113 V13.3.0 (2017-01)43GPP TS 36.113 version 13.3.0 Release 138.3 Conducted emission DC power input/output port 23g38.3.1 Definition 23g38.3.2 Test method 23g38.3.3 Limits 23g38.4 Conducted emissions, AC mains power input/output port . 24g38.4.1 Definition 24g38.4.2 Test method 24g38.4.3 Lim
22、its 24g38.5 Harmonic Current emissions (AC mains input port) 25g38.6 Voltage fluctuations and flicker (AC mains input port) . 25g38.7 Telecommunication ports . 25g38.7.1 Definition 25g38.7.2 Test method 25g38.7.3 Limits 25g39 Immunity 26g39.1 Test methods and levels for immunity tests . 26g39.2 Test
23、 configurations . 26g39.3 RF electromagnetic field (80 MHz - 1000 MHz, 1400 MHz to 2700 MHz) 27g39.3.1 Definition 27g39.3.2 Test method and level . 27g39.3.3 Performance criteria 27g39.4 Electrostatic discharge 27g39.4.1 Definition 28g39.4.2 Test method and level . 28g39.4.3 Performance criteria 28g
24、39.5 Fast transients common mode 28g39.5.1 Definition 28g39.5.2 Test method and level . 28g39.5.3 Performance criteria 29g39.6 RF common mode (0,15 MHz - 80 MHz) 29g39.6.1 Definition 29g39.6.2 Test method and level . 29g39.6.3 Performance criteria 29g39.7 Voltage dips and interruptions 30g39.7.1 Def
25、inition 30g39.7.2 Test method and level . 30g39.7.3 Performance criteria 30g39.8 Surges, common and differential mode 31g39.8.1 Definition 31g39.8.2 Test method and level . 31g39.8.2.1 Test method for telecommunication ports directly connected to outdoor cables 31g39.8.2.2 Test method for telecommun
26、ication ports connected to indoor cables . 31g39.8.2.3 Test method for AC power ports . 31g39.8.3 Performance criteria 31g3Annex A (informative): Change history . 33g3History 34g3ETSI ETSI TS 136 113 V13.3.0 (2017-01)53GPP TS 36.113 version 13.3.0 Release 13Foreword This Technical Specification has
27、been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identi
28、fying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes
29、 of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 136 113 V13.3.0 (2017-01)63GPP TS 36.113 version 13.3.0 Release 131 Scope The present document covers the assessmen
30、t of E-UTRA, E-UTRA with NB-IoT or NB-IoT base stations, repeaters and associated ancillary equipment in respect of Electromagnetic Compatibility (EMC). The present document specifies the applicable test conditions, performance assessment and performance criteria for E-UTRA, E-UTRA with NB-IoT or NB
31、-IoT base stations, repeaters and associated ancillary equipment in one of the following categories: - base sations of E-UTRA, E-UTRA with NB-IoT or NB-IoT meeting the requirements of TS 36.104 2, with conformance demonstrated by compliance to TS 36.141 3. - repeaters of E-UTRA meeting the requireme
32、nts of TS 36.106 4, with conformance demonstrated by compliance to TS 36.143 5. Technical requirements related to the antenna port of E-UTRA, E-UTRA with NB-IoT or NB-IoT base stations or repeaters are not included in the present document. These are found in the relevant product standards 2-5. The e
33、nvironment classification used in the present document refers to the residential, commercial and light industrial environment classification used in IEC 61000-6-1 6 and IEC 61000-6-3 7. The EMC requirements have been selected to ensure an adequate level of compatibility for apparatus at residential,
34、 commercial and light industrial environments. The levels, however, do not cover extreme cases which may occur in any location but with low probability of occurrence. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present d
35、ocument. - References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. - For a specific reference, subsequent revisions do not apply. - For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP documen
36、t (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 2 3GPP TR 36.104: “Evolved Universal Terrestrial Radio Access (E-UTRA); Base Station (B
37、S) radio transmission and reception“. 3 3GPP TR 36.141: “Evolved Universal Terrestrial Radio Access (E-UTRA); Base Station (BS) conformance testing “. 4 3GPP TR 36.106: “Evolved Universal Terrestrial Radio Access (E-UTRA); Repeater radio transmission and reception“. 5 3GPP TR 36.143: “Evolved Univer
38、sal Terrestrial Radio Access (E-UTRA); Repeater conformance testing “. 6 IEC 61000-6-1: 2005; “Electromagnetic compatibility (EMC) - Part 6: Generic standards - Section 1: Immunity for residential, commercial and light-industrial environments“. 7 IEC 61000-6-3:2006/AMD1:2010: “Electromagnetic compat
39、ibility (EMC) - Part 6: Generic standards - Section 3: Emission standard for residential, commercial and light industrial environments“. 8 IEC 60050(161): “International Electrotechnical Vocabulary - Chapter 161: Electromagnetic compatibility“. ETSI ETSI TS 136 113 V13.3.0 (2017-01)73GPP TS 36.113 v
40、ersion 13.3.0 Release 139 3GPP TR 36.101: “Evolved Universal Terrestrial Radio Access (E-UTRA); User Equipment (UE) radio transmission and reception“. 10 ITU-R Rec. SM.329: “Unwanted emissions in the spurious domain“. 11 CISPR 22: “Limits and methods of measurement of radio disturbance characteristi
41、cs of information technology equipment“. 12 CISPR 16-1-1: “Specification for radio disturbance and immunity measuring apparatus and methods - Measuring apparatus“. 13 IEC 61000-3-2 (2004): “Electromagnetic compatibility (EMC) - Part 3: Limits - Section 2: Limits for harmonic current emissions (equip
42、ment input current 16 A)“. 14 IEC 61000-3-12 (2005): “Electromagnetic compatibility (EMC) - Part 3-12: Limits- Limits for harmonic current produced by equipment connected to public low-voltage system with input current 16 A and 75 A. 15 IEC 61000-3-3 (2002): “Electromagnetic compatibility (EMC) - Pa
43、rt 3: Limits - Section 3: Limitation of voltage fluctuations and flicker in low-voltage supply systems for equipment with rated current 16 A“. 16 IEC 61000-3-11 (2000): “Electromagnetic compatibility (EMC) - Part 3-11: Limits Limitation of voltage fluctuations and flicker in low-voltage supply syste
44、ms for equipment with rated current 75 A and subject to conditional connections“. 17 IEC 61000-4-3: “Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 3: Radiated, radio-frequency electromagnetic field immunity test“. 18 IEC 61000-4-2: “Electromagnetic compat
45、ibility (EMC) - Part 4: Testing and measurement techniques - Section 2: Electrostatic discharge immunity test“. 19 IEC 61000-4-4: “Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 4: Electrical fast transient/burst immunity test“. 20 IEC 61000-4-6: “Electrom
46、agnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 6: Immunity to contacted disturbances, induced by radio frequency fields“. 21 IEC 61000-4-11: “Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 11: Voltage dips, short interru
47、ptions and voltage variations. Immunity tests“. 22 IEC 61000-4-5: “Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 5: Surge immunity test“. 23 ITU-R Recommendation SM.1539 (2001): “Variation of the boundary between the out-of-band and spurious domains requi
48、red for the application of Recommendations ITU-R SM.1541 and ITU-R SM.329“. 24 3GPP TS 37.113: “E-UTRA, UTRA and GSM/EDGE; Multi-Standard Radio (MSR) Base Station (BS) Electromagnetic Compatibility (EMC)“. 3 Definitions, symbols and abbreviations 3.1 Definitions For the purposes of the present docum
49、ent, the terms and definitions given in TR 21.905 1 and the following apply. A term defined in the present document takes precedence over the definition of the same term, if any, in TR 21.905 1. Ancillary equipment: Equipment (apparatus), used in connection with a receiver, transmitter or transceiver is considered as an ancillary equipment (apparatus) if: ETSI ETSI TS 136 113 V13.3.0 (2017-01)83GPP TS 36.113 version 13.3.0 Release 13- the equipment is intended for use in conjunction with a receiver, tr