1、 ETSI TS 155 242 V14.0.0 (2017-04) Digital cellular telecommunications system (Phase 2+) (GSM); Specification of the GIA4 integrity algorithm for General Packet Radio Service (GPRS); Implementers test data (3GPP TS 55.242 version 14.0.0 Release 14) TECHNICAL SPECIFICATION GLOBAL SYSTEM FOR MOBILE CO
2、MMUNICATIONSRETSI ETSI TS 155 242 V14.0.0 (2017-04)13GPP TS 55.242 version 14.0.0 Release 14Reference RTS/TSGS-0355242ve00 Keywords GSM,SECURITY ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C As
3、sociation but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or p
4、rint versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept
5、 on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.asp
6、x If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
7、and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All
8、 rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered
9、and owned by the GSM Association. ETSI ETSI TS 155 242 V14.0.0 (2017-04)23GPP TS 55.242 version 14.0.0 Release 14Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is
10、 publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the
11、 ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be
12、, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. Th
13、ese should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should no
14、t“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 155
15、242 V14.0.0 (2017-04)33GPP TS 55.242 version 14.0.0 Release 14Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 4g3Introduction 4g31 Scope 5g32 References 5g33 Definitions and abbreviations . 5g33.1 Definitions 5g33.2 Abbreviations . 5g34 Introductory infor
16、mation 5g34.1 Introduction 5g34.2 Notation 5g34.2.1 Radix . 5g34.2.2 Conventions 6g34.2.3 Bit/Byte ordering 6g34.3 List of variables 6g35 Test data . 7g3Annex A (informative): Change history . 8g3History 9g3ETSI ETSI TS 155 242 V14.0.0 (2017-04)43GPP TS 55.242 version 14.0.0 Release 14Foreword This
17、Technical Specification has been produced by the 3rd Generation Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-relea
18、sed by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit i
19、s incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. Introduction The present documenthas been prepared by the 3GPP Task Force, and gives a detailed spe
20、cification of the 3GPP integrity algorithm GIA4. The present document is the second of three, which between them form the entire specification of the 3GPP Integrity Algorithm GIA4: - 3GPP TS 55.241: “3rd Generation Partnership Project; Technical Specification Group Services and System Aspects; Speci
21、fication of the GIA4 integrity algorithms for GPRS; GIA4 specification“. - 3GPP TS 55.242: “3rd Generation Partnership Project; Technical Specification Group Services and System Aspects; Specification of the GIA4 integrity algorithms for GPRS; Implementers test data“. - 3GPP TS 55.243: “3rd Generati
22、on Partnership Project; Technical Specification Group Services and System Aspects; Specification of the GIA4 integrity algorithms for GPRS; Design conformance test data“. ETSI ETSI TS 155 242 V14.0.0 (2017-04)53GPP TS 55.242 version 14.0.0 Release 141 Scope The present document defines the implement
23、ers test data of the 3GPP integrity algorithm GIA4. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. - References are either specific (identified by date of publication, edition number, version number, etc.)
24、 or non-specific. - For a specific reference, subsequent revisions do not apply. - For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in
25、the same Release as the present document. 1 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 2 3GPP TS 55.241: “Specification of the GIA4 encryption algorithms for GPRS; GIA4 specification“. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and
26、definitions given in 3GPP TR 21.905 1 and the following apply. A term defined in the present document takes precedence over the definition of the same term, if any, in 3GPP TR 21.905 1. 3.2 Abbreviations For the purposes of the present document, the abbreviations given in 3GPP TR 21.905 1 and the fo
27、llowing apply. An abbreviation defined in the present document takes precedence over the definition of the same abbreviation, if any, in 3GPP TR 21.905 1. 4 Introductory information 4.1 Introduction The integrity algorithm GIA4 computes a 32-bit MAC (Message Authentication Code) of a given input mes
28、sage using integrity key KI128. The approach adopted uses KASUMI 2 in a form of CBC-MAC mode. 4.2 Notation 4.2.1 Radix “0x“ is used to indicate hexadecimal numbers. ETSI ETSI TS 155 242 V14.0.0 (2017-04)63GPP TS 55.242 version 14.0.0 Release 144.2.2 Conventions The assignment operator “=“, is used a
29、s in several programming languages. The following: = means that assumes the value that had before the assignment took place. For instance, x = x + y + 3 means (new value of x) becomes (old value of x) + (old value of y) + 3. 4.2.3 Bit/Byte ordering All data variables in this specification are presen
30、ted with the most significant bit (or byte) on the left hand side and the least significant bit (or byte) on the right hand side. Where a variable is broken down into a number of sub-strings, the left most (most significant) sub-string is numbered 0, the next most significant is numbered 1 and so on
31、 through to the least significant. For example an n-bit MESSAGE is subdivided into 64-bit substrings MB0,MB1MBiso for a message: 0x0123456789ABCDEFFEDCBA987654321086545381AB594FC28786404C50A37 The resulting notation is: MB0= 0x0123456789ABCDEF MB1= 0xFEDCBA9876543210 MB2= 0x86545381AB594FC2 MB3= 0x8
32、786404C50A37 In binary this would be: 000000010010001101000101011001111000100110101011110011011110111111111110 with MB0 = 0000000100100011010001010110011110001001101010111100110111101111 MB1 = 1111111011011100101110101001100001110110010101000011001000010000 MB2 = 100001100101010001010011100000011010
33、1011010110010100111111000010 MB3 = 1000011110000110010000000100110001010000101000110111 4.3 List of variables A, B are 64-bit registers that are used within the function to hold intermediate values. BLOCKS an integer variable indicating the number of successive applications of KASUMI that need to be
34、 performed. CONSTANT-F a 32-bit parameter which is constant for any given FRAMETYPE input. DIRECTION a 1-bit input indicating the direction of transmission (uplink or downlink). FRAMETYPE an 8-bit input to the function indicating the type of frame to be protected. INPUT-I a 32-bit time variant input
35、 to the function. KI128 the 128-bit integrity key. KM a 128-bit constant that is used to modify a key. M an input to the function which specifies the number of octets of message to be MACd (1-65536). MAC the 32-bit message authentication code (MAC) produced by the function. ETSI ETSI TS 155 242 V14.
36、0.0 (2017-04)73GPP TS 55.242 version 14.0.0 Release 14MESSAGE the input octet stream of length M octets that is to be processed by the function. PS is the input padded string processed by the function. 5 Test data This clause only available under licence. See http:/www.etsi.org/about/what-we-do/secu
37、rity-algorithms-and-codes/cellular-algorithm-licences. ETSI ETSI TS 155 242 V14.0.0 (2017-04)83GPP TS 55.242 version 14.0.0 Release 14Annex A (informative): Change history Change history Date Meeting TDoc CR Rev Cat Subject/Comment New version 2017-03 SA#75 SP-170088 Presented for approval 2.0.0 2017-03 SA#75 Upgrade to change control version 13.0.0 2017-03 SA#75 - - - Promotion to Release 14 without technical change 14.0.0 ETSI ETSI TS 155 242 V14.0.0 (2017-04)93GPP TS 55.242 version 14.0.0 Release 14History Document history V14.0.0 April 2017 Publication
