FORD ESF-M99G135-A2-2012 INSULATOR SILICONE RUBBER COATED GLASS FABRIC ADHESIVE COATED ONE SIDE TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD ESF-M99G135-A1).pdf

上传人:brainfellow396 文档编号:746320 上传时间:2019-01-14 格式:PDF 页数:2 大小:39.68KB
下载 相关 举报
FORD ESF-M99G135-A2-2012 INSULATOR SILICONE RUBBER COATED GLASS FABRIC ADHESIVE COATED ONE SIDE  TO BE USED WITH FORD WSS-M99P1111-A  (Shown on FORD ESF-M99G135-A1).pdf_第1页
第1页 / 共2页
FORD ESF-M99G135-A2-2012 INSULATOR SILICONE RUBBER COATED GLASS FABRIC ADHESIVE COATED ONE SIDE  TO BE USED WITH FORD WSS-M99P1111-A  (Shown on FORD ESF-M99G135-A1).pdf_第2页
第2页 / 共2页
亲,该文档总共2页,全部预览完了,如果喜欢就下载吧!
资源描述

1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Rev 03 2012 05 07 N Status No usage or replacement N. Benipal, NA 2006 09 21 Revised Inserted 3.0; Deleted 3.1, 3,.2, 3.3, 3.8, 3.9 & 4 1980 10 70 Released CF4K-RD576983-12 (was XF-M99GX28) Controlled document at www.MATS Copyright 2012, Ford

2、 Global Technologies, LLC Page 1 of 2 INSULATOR, SILICONE RUBBER COATED GLASS FABRIC, ESF-M99G135-A1 ADHESIVE COATED, ONE SIDE ESF-M99G135-A2 ESF-M99G135-A4 ESF-M99G135-A5 ESF-M99G135-A6 ESF-M99G135-A7 NOT TO BE USED FOR NEW DESIGN 1. SCOPE The materials defined by these specifications are silicone

3、rubber coated glass fabrics with adhesive coating on one side which are electrical insulators and heat conductors. 2. APPLICATION These specifications were released originally for materials used to insulate transistors from their heat sinks in the EEC module. 3. REQUIREMENTS Material specification r

4、equirements are to be used for initial qualification of materials. 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). A1 A2 A4 A5 A6 A7 3.4 DIELECTRIC STRENGTH 15 15 15

5、 15 8.0 11 kV/mm, min (ASTM D 149) 3.5 VOLUME RESISTIVITY, 112 114 113 113 113 112 ohm-cm, min (ASTM D 257) 3.6 SPECIFIC GRAVITY 1.6- 1.1- 1.4- 1.4- 1.5- 1.2- (ASTM D 792) 2.1 1.7 2.0 2.0 2.1 1.5 3.7 TENSILE STRENGTH, N/mm, min (ASTM D 412) Warp 18 18 18 18 18 8 Fill 12 12 12 12 12 6 ENGINEERING MAT

6、ERIAL SPECIFICATION ESF-M99G135-A1/A2/A4/A5/A6/A7 Copyright 2012, Ford Global Technologies, LLC Page 2 of 2 A1 A2 A4 A5 A6 A7 5. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of these specifications. 5.1 THERMAL RESISTANCE Th

7、e performance of an insulator prepared from the glass cloth supported silicone rubber sheet stock specified herein can be determined using various test methods called “thermal resistance“ or “thermal impedence“ tests. These tests take into account variations in the thermal conductivity of the insula

8、tor caused by the adhesive, component surface finish, and clamping forces. For modeling purposes, this data may be more appropriate than thermal conductivity which is a property of the bulk material. 5.2 THICKNESS*, ADHESIVE 0.203 0.203 0.254 0.305 0.305 0.279 COATED, nominal, mm or 0.254 *Thickness originally approved. Other thicknesses may be used as specified on the engineering drawing.

展开阅读全文
相关资源
猜你喜欢
相关搜索

当前位置:首页 > 标准规范 > 国际标准 > 其他

copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1