FORD SD-M1A9109-A-2009 STEEL RUSTLESS FOR DECORATIVE TRIM TO BE USED WITH FORD WSS-M99P1111-A 《装饰条用不锈钢 与标准FORD WSS-M99P1111-A一起使用 》.pdf
《FORD SD-M1A9109-A-2009 STEEL RUSTLESS FOR DECORATIVE TRIM TO BE USED WITH FORD WSS-M99P1111-A 《装饰条用不锈钢 与标准FORD WSS-M99P1111-A一起使用 》.pdf》由会员分享,可在线阅读,更多相关《FORD SD-M1A9109-A-2009 STEEL RUSTLESS FOR DECORATIVE TRIM TO BE USED WITH FORD WSS-M99P1111-A 《装饰条用不锈钢 与标准FORD WSS-M99P1111-A一起使用 》.pdf(3页珍藏版)》请在麦多课文档分享上搜索。
1、 ENGINEERING MATERIAL SPECIFICATION Material Name Specification Number Date Action Revisions 2009 03 25 N-STATUS No Replacement Named L. Sinclair, FNA 2002 07 30 Revised Updated and renumbered 1973 08 12 ES/EM2689TC Replaces/Ersetzt EM-1A-22 Printed copies are uncontrolled Page 1 of 3 Copyright 2009
2、, Ford Global Technologies, Inc. STEEL RUSTLESS FOR DECORATIVE TRIM SD-M1A9109-A STEEL RUSTLESS FOR DECORATIVE TRIM SD-M1A9109-B NOT TO BE USED FOR NEW DESIGN 1. SCOPE The materials defined by this specification are ferritic chromium rust resisting steels in the form of plate, sheet or strip. 2. APP
3、LICATION These materials are primarily intended for the manufacture of interior decorative trim mouldings and exterior moulding above the waistline level. As a general recommendation alloy A is for interior mouldings and alloy B for exterior mouldings. 3. REQUIREMENTS 3.1 STANDARD REQUIREMENTS FOR P
4、RODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 CHEMICAL COMPOSITION, % Alloy A Alloy B Carbon 0.10 max 0.10 max Chromium 15.5 - 18.0 18.0 - 22.0 Nickel 0.50 max 0.50 max Manganese 1.0 max 1.0
5、 max Silicon 1.0 max 1.0 max Phosphorus 0.045 max 0.045 max Sulphur 0.030 max 0.030 max Iron Balance Balance ENGINEERING MATERIAL SPECIFICATION SD-M1A9109-A/B Page 2 of 3 Copyright 2009, Ford Global Technologies, Inc. 3.3 MECHANICAL PROPERTIES The mechanical properties of the material shall be suita
6、ble for forming the part without defects unacceptable to Product Development Group. Any additional requirement shall be specified on the Component Engineering drawing. 3.4 MATERIAL - AS RECEIVED FROM THE MILL 3.4.1 Surface Finish Material supplied to this specification shall be uniform in quality, c
7、lean, sound, smooth, not to exceed 0.25 m finish and free from defects detrimental to performance fabrication, corrosion resistance or appearance of the part for which it is intended. The surface quality shall be such that the material can be buffed to a finish and luster to meet visual acceptance s
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
最后一页预览完了!喜欢就下载吧,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- FORDSDM1A9109A2009STEELRUSTLESSFORDECORATIVETRIMTOBEUSEDWITHFORDWSSM99P1111A 装饰 不锈钢 标准 FORDWSSM99P1111A

链接地址:http://www.mydoc123.com/p-748098.html