1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Rev. 00 2017 04 03 Released W. Lanna, APA Controlled document at www.MATS Copyright 2017, Ford Global Technologies, LLC Page 1 of 3 FABRIC, BAYEN PATTERN, FLAT WOVEN RECYCLED, WRS-M1H1300-A23 PIR/PCR CONTENT WITH SOIL REPELLANT AND BACKCOATIN
2、G 1. SCOPE The material defined by this specification is a flat woven polyester face fabric containing a minimum of 25% PIR/PCR (Post industrial/post consumer) recycled yarn. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for Escort MY18 Seat B
3、olster. The fabric was originally approved as tri-laminated with foam and a backing scrim. 3. REQUIREMENTS 3.1 APPROVED SOURCES This specification requires the use of approved sources. Only the sources identified on the Ford Approved Source List (ASL) can be used when this specification is listed on
4、 the drawing, CAD file, or other documents. The list of approved sources is located within Ford at or available externally through a Ford Materials Engineer. 3.2 APPEARANCE The color, pattern, and finish shall match the approved Corporate Design master sample. 3.3 FABRIC PERFORMANCE In addition to
5、the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-B1/B2/B3/B4/latest as applicable. 3.4 VEHICLE INTERIOR ENVIRONMENTAL PERFORMANCE Materials used in interior applications must meet the requirements outlined in WSS-M99P2222-D1/latest, Performance, Vehicle Interior En
6、vironmental Quality Material/Component Requirements. Data must be included in material submission package. 3.5 CONDITIONING AND TEST CONDITIONS All test values are based on material conditioned for not less than 24 h prior to testing in a controlled environment of 23 +/- 2 C and 50 +/- 5% relative h
7、umidity. Testing of the material should occur in the conditioning environment or soon after removal. ENGINEERING MATERIAL SPECIFICATION WRS-M1H1300-A23 Copyright 2017, Ford Global Technologies, LLC Page 2 of 3 3.6 FABRIC CONSTRUCTION 3.6.1 Fabric Count, -/+5 % tolerance (ASTM D3775) Warp 527 / 10 cm
8、 Fill 290 / 10 cm 3.6.2 Fabric Weight, -/+5 % tolerance (FLTM BN 106-01) Face fabric, -/+5 % tolerance 316 g/m2 Back Coating, -/+ 10% tolerance 15 g/m2 Total Weight 331 g/m2 3.7 COMPOSITION (ASTM D629) Fabric 100% polyester Back Coating PET 3.8 YARN CONSTRUCTION (ASTM D1244) Warp 333 Dtex f72 (False
9、 twist texturized) Weft 333 Dtex f72, (100% recycled yarn, false twist texturized) 3.9 RECYCLED CONTENT Recycled yarn must contain a minimum of 25% recycled content PIR/PCR (Postindustrial/post consumer) as defined by WRS-M99P42-A2. The remaining portion of the material can come from virgin sources.
10、 Refer to the Approved Source List (ASL), for specific regional recycled levels for this material. 3.10 METHOD OF DYEING Solution/ dyed 3.11 FINISHED OPERATIONS Washing, drying, Back Coating, SR, Framing Any changes to the above process must be approved by Materials Engineering. 4. GENERAL INFORMATI
11、ON The information given below is provided for clarification and assistance in meeting the requirements of this specification. Contact for questions concerning Engineering Material Specifications. 4.1 Purchase departments will ensure that the material defined in this specification and shipped to an
12、y one assembly plant will be produced by one supplier only. In the event of a Global Program or regional duplication, each regional location of the supplier for this specification must provide a construction package and be approved to meet this specification. 4.2 If yarn is locally sourced it must m
13、eet the above fabric construction, composition and yarn construction. The fabric must also meet the requirements of WSS-M8P18-B1/B2/B3/B4/latest. ENGINEERING MATERIAL SPECIFICATION WRS-M1H1300-A23 Copyright 2017, Ford Global Technologies, LLC Page 3 of 3 4.3 Global strategy for this fabric is to use
14、 tri-laminate/foam & scrim construction in all regions. 4.4 APPROVAL OF MATERIALS Suppliers desiring approval of their materials shall first obtain an expression of interest from Purchasing, Design or Product Development, and Materials Engineering. The supplier shall submit a completed copy of their
15、 laboratory test reports, signed by a qualified and authorized representative of the test facility, demonstrating full compliance with all the requirements of the Material Specification. Tested material samples must be available for review upon request and kept for a minimum of one year. Upon reques
16、t, the supplier will review the associated quality control documents (Process Failure Mode and Effects Analysis, Control Plans, Certification testing) with Ford. 4.5 SUPPLIERS ONGOING RESPONSIBILITY All materials must be equivalent in all characteristics to the material upon which approval was origi
17、nally granted. Prior to making any changes to the material originally approved, whether or not such changes affect the materials ability to meet the specification requirements, the supplier shall notify the affected Supplier Technical Assistance (STA), Purchasing, and Materials Engineering activitie
18、s of the proposed changes (with reasons) by submission of a completed Suppliers Request for Engineering Approval, SREA. For parts and components using Ford Engineering Material Specifications, all samples tested to the specifications for Design Verification (DV), Production Verification (PV) and Pro
19、duction Part Approval Process (PPAP) sign off must be kept until Job 1. 4.6 RESTRICTED SUBSTANCE MANAGEMENT STANDARD Substance restrictions imposed by regulations or Company direction applies to the materials addressed by this document. The restrictions are identified in the Restricted Substance Management Standard WSS-M99P9999-A1/latest which is updated yearly. It is the suppliers responsibility to comply with this standard on a continuing basis. 5. SUMMARY OF REVISIONS
