FORD WSD-M1H597-C2-2008 FABRIC JIGSAW DESIGN WEFT KNITTED 6 mm TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSD-M1H597-A)《拼图图案的6 mm厚纬编针织织物 与标准FORD WSS-M99P1111-A一起使用 列于标准.pdf

上传人:feelhesitate105 文档编号:749518 上传时间:2019-01-14 格式:PDF 页数:6 大小:32.02KB
下载 相关 举报
FORD WSD-M1H597-C2-2008 FABRIC JIGSAW DESIGN WEFT KNITTED 6 mm  TO BE USED WITH FORD WSS-M99P1111-A  (Shown on FORD WSD-M1H597-A)《拼图图案的6 mm厚纬编针织织物  与标准FORD WSS-M99P1111-A一起使用  列于标准.pdf_第1页
第1页 / 共6页
FORD WSD-M1H597-C2-2008 FABRIC JIGSAW DESIGN WEFT KNITTED 6 mm  TO BE USED WITH FORD WSS-M99P1111-A  (Shown on FORD WSD-M1H597-A)《拼图图案的6 mm厚纬编针织织物  与标准FORD WSS-M99P1111-A一起使用  列于标准.pdf_第2页
第2页 / 共6页
FORD WSD-M1H597-C2-2008 FABRIC JIGSAW DESIGN WEFT KNITTED 6 mm  TO BE USED WITH FORD WSS-M99P1111-A  (Shown on FORD WSD-M1H597-A)《拼图图案的6 mm厚纬编针织织物  与标准FORD WSS-M99P1111-A一起使用  列于标准.pdf_第3页
第3页 / 共6页
FORD WSD-M1H597-C2-2008 FABRIC JIGSAW DESIGN WEFT KNITTED 6 mm  TO BE USED WITH FORD WSS-M99P1111-A  (Shown on FORD WSD-M1H597-A)《拼图图案的6 mm厚纬编针织织物  与标准FORD WSS-M99P1111-A一起使用  列于标准.pdf_第4页
第4页 / 共6页
FORD WSD-M1H597-C2-2008 FABRIC JIGSAW DESIGN WEFT KNITTED 6 mm  TO BE USED WITH FORD WSS-M99P1111-A  (Shown on FORD WSD-M1H597-A)《拼图图案的6 mm厚纬编针织织物  与标准FORD WSS-M99P1111-A一起使用  列于标准.pdf_第5页
第5页 / 共6页
点击查看更多>>
资源描述

1、 ENGINEERING MATERIAL SPECIFICATION Material Name Specification Number Date Action Revisions 2008 11 10 N-STATUS No Replacement L. Schmalz, FNA / M. Montgomery, FOE 2003 01 27 Revised Para 3.0 inserted ; Para 3.1, 3.2, 3.3, 3.20, 3.21, 4 deleted 1993 03 10 C10284760 Released M. Judd Printed copies a

2、re uncontrolled Page 1 of 6 Copyright 2008, Ford Global Technologies, Inc. FABRIC, JIGSAW DESIGN, WEFT KNITTED, UNLAMINATED WSD-M1H597-A FABRIC, JIGSAW DESIGN, WEFT KNITTED, 3 mm WSD-M1H597-B1 FABRIC, JIGSAW DESIGN, WEFT KNITTED, 6 mm WSD-M1H597-B2 FABRIC, JIGSAW DESIGN, WEFT KNITTED, 3 mm WSD-M1H59

3、7-C1 FABRIC, JIGSAW DESIGN, WEFT KNITTED, 6 mm WSD-M1H597-C2 FABRIC, JIGSAW DESIGN, WEFT KNITTED, 6 mm WSD-M1H597-D2 FABRIC, JIGSAW DESIGN, WEFT KNITTED, 3 mm PU WSD-M1H597-F1 FABRIC, JIGSAW DESIGN, WEFT KNITTED, 6 mm PU WSD-M1H597-F2 FABRIC, JIGSAW DESIGN, WEFT KNITTED, HFW WSD-M1H597-G FABRIC, JIG

4、SAW DESIGN, WEFT KNITTED, HFW WSD-M1H597-H FABRIC, JIGSAW DESIGN, WEFT KNITTED, HFW WSD-M1H597-J FABRIC, JIGSAW DESIGN, WEFT KNITTED, HFW WSD-M1H597-K NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by these specifications is a weft knitted Jacquards 20 gauge polyester face fabric which

5、can be flame laminated to polyethane foam and backed with a knitted fabric. It can also be backed with an HFW weldable backcoating. 2. APPLICATION WSD-M1H597-A Is used for molded headrests and also adhesive coated for use on inner door panels. WSD-M1H597-B1, B2, C1, C2, F1, F2 are used for seat wear

6、ing surfaces. WSD-M1H597-D2 is used adhesively bonded door and quarter trim panel applications. WSD-M1H597-G, H, J & K are used for inner door, quarter trim panels and/or as specified on Engineering Drawings. JIGSAW DESIGN WSD-M1H597-A Unlaminated WSD-M1H597-B1 3.0 mm, flame laminated to polyether f

7、oam and knitted fabric WSD-M1H597-B2 6.0 mm, flame laminated to polyether foam and knitted fabric WSD-M1H597-C1 3.0 mm, flame laminated to polyester foam and knitted fabric (EAO use only) ENGINEERING MATERIAL SPECIFICATION WSD-M1H597-A/B1/B2 C1/C2/D2/F1/F2/G/H/J/K Page 2 of 6 Copyright 2008, Ford Gl

8、obal Technologies, Inc. WSD-M1H597-C2 6.0 mm, flame laminated to polyester foam and knitted fabric (EAO use only) WSD-M1H597-D2 6.0 mm, flame laminated to polyether foam WSD-M1H597-F1 3.0 mm, flame laminated to polyester foam and polyurethane film (EAO use only) WSD-M1H597-F2 6.0 mm, flame laminated

9、 to polyester foam and polyurethane film (EAO use only) WSD-M1H597-G HF-weldable vinyl film, adhesive bonded, or an engineering approved alternative WSD-M1H597-H HF-weldable acrylic backcoating applied by the doctor-knife spreading technique, or an engineering approved alternative WSD-M1H597-J HF-we

10、ldable vinyl backcoating applied by the doctor-knife spreading technique, or an engineering approved alternative WSD-M1H597-K HF-weldable polyurethane applied by the doctor-knife spreading technique, or an engineering approved alternative 3. REQUIREMENTS In addition to the requirements listed herein

11、, the fabric shall meet all requirements of WSB-M8P1-H. 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.4 FABRIC CONSTRUCTION 3.4.1 Fabric Count, +/- 5 % tolerance

12、 (ASTM D 3887) Wales 95 wales/10 cm Courses 135 courses/10 mm 3.4.2 Fabric Weight, min 300 - 350 g/m2(FLTM BN 106-01) 3.4.3 Pile Height, min 1.7 mm (microscope technique) ENGINEERING MATERIAL SPECIFICATION WSD-M1H597-A/B1/B2 C1/C2/D2/F1/F2/G/H/J/K Page 3 of 6 Copyright 2008, Ford Global Technologies

13、, Inc. 3.5 COMPOSITION (ASTM D 629) Fabric 100 % polyester 3.6 YARN CONSTRUCTION (ASTM D 1244) Ground* 220 dTex f40 72 (polyester, semi-dul) Pile 167 dTex f30 48 (polyester, bright) *Ground construction based on a 1:1 tricot. A full knit jersey ground may be used for door panel and seating applicati

14、ons with agreement by Materials Engineering. 3.7 METHOD OF DYEING Yarn dyed and spun dyed or as approved by Materials Engineering 3.8 FINISHED OPERATIONS As approved by Materials Engineering 3.9 REQUIREMENTS FOR POLYESTER FOAM As specified in WSD-M2D243-A4 3.10 REQUIREMENTS FOR POLYETHER FOAM As spe

15、cified in WSD-M2D243-A2 3.11 REQUIREMENTS FOR THE BACKING FABRIC As specified in WSD-M9H134-A 3.12 REQUIREMENTS FOR THE As specified in WSD-M99H134-B POLYURETHANE BACKING FABRIC 3.13 REQUIREMENTS FOR THE FLAME LAMINATED MATERIAL 3.13.1 Thickness, range (ASTM D 1777, circular presser foot area 645 mm

16、2, 2,8 g Force, 43 Pa pressure) WSD-M1H597-B1 3.5 +/- 1.0 mm WSD-M1H597-B2 6.5 +/- 1.0 mmWSD-M1H597-C1 3.5 +/- 1.0 mm WSD-M1H597-C2 6.5 +/- 1.0 mmWSD-M1H597-D2 6.0 +/- 1.0 mm WSD-M1H597-F1 4.0 +/- 1.0 mmWSD-M1H597-F2 7.0 +/- 1.0 mm ENGINEERING MATERIAL SPECIFICATION WSD-M1H597-A/B1/B2 C1/C2/D2/F1/F2

17、/G/H/J/K Page 4 of 6 Copyright 2008, Ford Global Technologies, Inc. 3.13.2 Compressed Thickness (1 kg Force, circular presser foot area 645 mm2, 5 s dwell) WSD-M1H597-D2 2.8 +/- 0.3 mm WSD-M1H597-F1 1.8 +/- 0.3 mmWSD-M1H597-F2 2.8 +/- 0.3 mm 3.13.3 Weight, min WSD-M1H597-B1 515 +/- 40 g/m2WSD-M1H597

18、-B2 620 +/- 40 g/m2WSD-M1H597-C1 490 +/- 40 g/m2WSD-M1H597-C2 580 +/- 40 g/m2WSD-M1H597-D2 520 +/- 40 g/m2WSD-M1H597-F1 460 +/- 40 g/m2WSD-M1H597-F2 550 +/- 40 g/m23.13.4 Stretch and Set, %, range (SAE J855) 3.13.4.1 Stretch (WSD-M1H597-B1, B2, C1, C2,) Wales 10 +/- 7 Courses 15 +/- 7 Set Wales 0 -5

19、 Courses 0 - 5 3.13.4.2 Stretch (WSD-M1H597-F1, F2) Wales 40 +/- 7 Courses 35 +/- 7 3.13.5 Modulus, max (WSD-M1H597-D2, F1, F2) Strain, 6 % Wales 20 NCour 5ENGINEERING MATERIAL SPECIFICATION WSD-M1H597-A/B1/B2 C1/C2/D2/F1/F2/G/H/J/K Page 5 of 6 Copyright 2008, Ford Global Technologies, Inc. 3.14 REQ

20、UIREMENTS FOR THE BACKCOATED MATERIAL (WSD-M1H597-G) 3.14.1 Weight, min (FLTM BN 106-01) PVC film 100 g/m2Face fabric weight as specified in para 3.4.2 Or an engineering approved alternative. 3.15 REQUIREMENTS FOR BACKCOATED MATERIAL (WSD-M1H597-H) 3.15.1 Weight, min. (FLTM BN 106-01) Acrylic Backco

21、ating 35 g/m2Face fabric weight as specified in para 3.4.2 Or an Engineering Approved Alternative. 3.16 REQUIREMENTS FOR THE BACKCOATED MATERIAL (WSD-M1H597-J) 3.16.1 Weight, min (FLTM BN 106-01) PVC Backcoating 40 g/m2Face fabric weight as specified in para 3.4.2. Or an Engineering Approved Alterna

22、tive. 3.17 REQUIREMENTS FOR THE BACKCOATED MATERIAL (WSD-M1H597-K) 3.17.1 Weight, min (FLTM BN 106-01) Polyurethane Backcoating 40 g/m2Face fabric weight as specified in para 3.4.2. Or an Engineering Approved Alternative. ENGINEERING MATERIAL SPECIFICATION WSD-M1H597-A/B1/B2 C1/C2/D2/F1/F2/G/H/J/K P

23、age 6 of 6 Copyright 2008, Ford Global Technologies, Inc. 3.18 FLAMMABILITY (ISO 3795/SAE J369) Burn Rate, max 100 mm/minute Note: Not required on face fabric when used as a fully bonded composite. 3.19 REQUIREMENTS FOR THE FULLY BONDED DOOR PANELS The fully bonded finished components must satisfy t

24、he requirements of engineering component specification S-77FBB-23942-AA or equivalent if specified on the engineering drawing. In addition to these requirements fabric general performance should not be reduced by the bonding process. Ford Motor Company at its discretion may perform test on the finis

25、hed components to verify this. Minimum bond strengths will be specified which may vary according to the method of bonding employed. 3.19.1 Peel Adhesion Strength, min (FLTM BN 151-05) Fabric press formed to adhesive coated board. As received 20 N/50 mm width After Ageing 20 N/50 mm (4 h at 100 +/- 2

26、 C, 20 h at 40 +/- 2 C and 98 +/- 2 % R.H) These bond values are provisional and may be reassessed subsequent to statistical process control. 5. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of these specifications. 5.1 Purchase departments will ensure that both materials defined in this specification and shipped to any one assembly plant will be produced by one supplier only.

展开阅读全文
相关资源
猜你喜欢
相关搜索

当前位置:首页 > 标准规范 > 国际标准 > 其他

copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1