FORD WSD-M1H657-C2-2008 FABRIC AVON PATTERN KNITTED 6 mm - TO BE USED WITH FORD WSS-M99P1111-A 《亚芬河(AVON)图案的6 mm厚针织织物 与标准FORD WSS-M99P1111-A一起使用 列于标准FORD WSD-M1H657-A上》.pdf

上传人:proposalcash356 文档编号:749674 上传时间:2019-01-14 格式:PDF 页数:5 大小:27.71KB
下载 相关 举报
FORD WSD-M1H657-C2-2008 FABRIC AVON PATTERN KNITTED 6 mm -  TO BE USED WITH FORD WSS-M99P1111-A  《亚芬河(AVON)图案的6 mm厚针织织物  与标准FORD WSS-M99P1111-A一起使用  列于标准FORD WSD-M1H657-A上》.pdf_第1页
第1页 / 共5页
FORD WSD-M1H657-C2-2008 FABRIC AVON PATTERN KNITTED 6 mm -  TO BE USED WITH FORD WSS-M99P1111-A  《亚芬河(AVON)图案的6 mm厚针织织物  与标准FORD WSS-M99P1111-A一起使用  列于标准FORD WSD-M1H657-A上》.pdf_第2页
第2页 / 共5页
FORD WSD-M1H657-C2-2008 FABRIC AVON PATTERN KNITTED 6 mm -  TO BE USED WITH FORD WSS-M99P1111-A  《亚芬河(AVON)图案的6 mm厚针织织物  与标准FORD WSS-M99P1111-A一起使用  列于标准FORD WSD-M1H657-A上》.pdf_第3页
第3页 / 共5页
FORD WSD-M1H657-C2-2008 FABRIC AVON PATTERN KNITTED 6 mm -  TO BE USED WITH FORD WSS-M99P1111-A  《亚芬河(AVON)图案的6 mm厚针织织物  与标准FORD WSS-M99P1111-A一起使用  列于标准FORD WSD-M1H657-A上》.pdf_第4页
第4页 / 共5页
FORD WSD-M1H657-C2-2008 FABRIC AVON PATTERN KNITTED 6 mm -  TO BE USED WITH FORD WSS-M99P1111-A  《亚芬河(AVON)图案的6 mm厚针织织物  与标准FORD WSS-M99P1111-A一起使用  列于标准FORD WSD-M1H657-A上》.pdf_第5页
第5页 / 共5页
亲,该文档总共5页,全部预览完了,如果喜欢就下载吧!
资源描述

1、 ENGINEERING MATERIAL SPECIFICATION Material Name Specification Number Date Action Revisions 2008 11 17 N-STATUS No Replacement L. Schmalz, FNA / M. Montgomery, FOE 2003 02 26 Revised Para 3.0 inserted ; Para 3.1, 3.2, 3.3, 3.18, 3.19, 4 deleted 1994 05 31 C10348592 Released N. KomatsuPrinted copies

2、 are uncontrolled Page 1 of 5 Copyright 2008, Ford Global Technologies, Inc. FABRIC, AVON PATTERN, KNITTED, UNLAMINATED WSD-M1H657-A FABRIC, AVON PATTERN, KNITTED, 3 mm WSD-M1H657-B1 FABRIC, AVON PATTERN, KNITTED, 6 mm WSD-M1H657-B2 FABRIC, AVON PATTERN, KNITTED, 3 mm WSD-M1H657-C1 FABRIC, AVON PATT

3、ERN, KNITTED, 6 mm WSD-M1H657-C2 FABRIC, AVON PATTERN, KNITTED, HFW WSD-M1H657-G FABRIC, AVON PATTERN, KNITTED, HFW WSD-M1H657-H FABRIC, AVON PATTERN, KNITTED, HFW WSD-M1H657-J FABRIC, AVON PATTERN, KNITTED, HFW WSD-M1H657-K NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by these specif

4、ications is a 3 bar 28 gauge, warp knitted, simulated velour, polyester bodycloth. 2. APPLICATION WSD-M1H657-A is used for molded headrests and also adhesive coated for use on inner door panels. WSD-M1H657-B1, B2, C1, C2, are used for seat wearing surfaces. WSD-M1H657-G, H, J, K, are used for inner

5、door and quarter trim panels and/or as specified on Engineering Drawings. AVON PATTERN WSD-M1H657-A Unlaminated WSD-M1H657-B1 3.0 mm, flame laminated to polyether foam and knitted fabric WSD-M1H657-B2 6.0 mm, flame laminated to polyether foam and knitted fabric WSD-M1H657-C1 3.0 mm, flame laminated

6、to polyester foam and knitted fabric (EAO use only) WSD-M1H657-C2 6.0 mm, flame laminated to polyester foam and knitted fabric (EAO use only) WSD-M1H657-G HF-weldable vinyl film, adhesive bonded, or an engineering approved alternative ENGINEERING MATERIAL SPECIFICATION WSD-M1H657-A/B1/B2/C1/C2/G/H/J

7、/K Page 2 of 5 Copyright 2008, Ford Global Technologies, Inc. WSD-M1H657-H HF-weldable acrylic backcoating applied by the doctor-knife spreading technique, or an engineering approved alternative WSD-M1H657-J HF-weldable vinyl backcoating applied by the doctor-knife spreading technique, or an enginee

8、ring approved alternative WSD-M1H657-K HF-weldable polyurethane backcoating applied by the doctor-knife spreading technique, or an engineering approved alternative 3. REQUIREMENTS In addition to the requirements listed herein, the fabric or laminate shall meet all requirements of WSB-M8P1-H. 3.0 STA

9、NDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.4 FABRIC CONSTRUCTION 3.4.1 Fabric Count, +/- 5 % tolerance (ASTM D 3887) Wales 145 wales/10 cm Courses 200 courses/10 cm

10、3.4.2 Fabric Weight, g/m2, range 255 - 325 (FLTM BN 106-01) (290 average) 3.5 COMPOSITION (ASTM D 629) Fabric 100 % polyester 3.6 YARN CONSTRUCTION (ASTM D 1244) Pile 76 dtex f24, (polyester, semi-dul) Back 76 dtex f24, (polyester, semi-dul) 3.7 METHOD OF DYEING Piece dyed or as approved by Material

11、s Engineering ENGINEERING MATERIAL SPECIFICATION WSD-M1H657-A/B1/B2/C1/C2/G/H/J/K Page 3 of 5 Copyright 2008, Ford Global Technologies, Inc. 3.8 FINISHING OPERATIONS As approved by Materials Engineering 3.9 REQUIREMENTS FOR POLYESTER FOAM As specified in SK-M4D9502-A 3.10 REQUIREMENTS FOR POLYETHER

12、FOAM As specified in WSD-M2D43-A2 3.11 REQUIREMENTS FOR THE BACKING As specified in WSD-M9H125-B2 or an Engineering approved alternative 3.12 REQUIREMENTS FOR THE FLAME LAMINATED MATERIAL (WSD-M1H660-B1, B2, C1, C2) 3.12.1 Thickness, range (ASTM D 1777, circular presser foot area 645 mm2, 2.8 g forc

13、e, 43 Pa pressure) WSD-M1H657-B1 3.0 +/- 1.0 mm WSD-M1H657-B2 6.0 +/- 1.0 mmWSD-M1H657-C1 3.0 +/- 1.0 mm WSD-M1H657-C2 6.0 +/- 1.0 mm3.12.2 Weight, range (FLTM BN 106-01) WSD-M1H657-B1 410 +/- 40 g/m2WSD-M1H657-B2 530 +/- 40 g/m2WSD-M1H657-C1 390 +/- 40 g/m2WSD-M1H657-C2 490 +/- 40 g/m23.12.3 Stretc

14、h and Set, %, range (SAE J855) Stretch (WSD-M1H657-B1, B2, C1, C2) Wales 15 +/- 10 Cour 2Set (WSD-M1H657-B1, B2, C1, C2) Wales 0 -5 %Cour 0ENGINEERING MATERIAL SPECIFICATION WSD-M1H657-A/B1/B2/C1/C2/G/H/J/K Page 4 of 5 Copyright 2008, Ford Global Technologies, Inc. 3.13 REQUIREMENTS FOR THE BACKCOAT

15、ED MATERIAL (WSD-M1H657-G) 3.13.1 Weight, min (FLTM BN 106-01) PVC Film 100 g/m2Face fabric weight as specified in para 3.4.2 Or an engineering approved alternative. 3.14 REQUIREMENTS FOR BACKCOATED MATERIAL (WSD-M1H657-H) 3.14.1 Weight, min (FLTM BN 106-01) Acrylic Backcoating 35 g/m2Face fabric we

16、ight as specified in para 3.4.2 Or an engineering approved alternative. 3.15 REQUIREMENTS FOR THE BACKCOATED MATERIAL (WSD-M1H657-J) 3.15.1 Weight, min (FLTM BN 106-01) PVC Backcoating 40 g/m2Face fabric weight as specified in para 3.4.2 Or an engineering approved alternative. 3.16 REQUIREMENTS FOR

17、THE BACKCOATED MATERIAL (WSD-M1H657-K) 3.16.1 Weight, min (FLTM BN 106-01) Polyurethane Backcoating 40 g/m2Face fabric weight as specified in para 3.4.2 Or an engineering approved alternative. ENGINEERING MATERIAL SPECIFICATION WSD-M1H657-A/B1/B2/C1/C2/G/H/J/K Page 5 of 5 Copyright 2008, Ford Global

18、 Technologies, Inc. 3.17 FLAMMABILITY (ISO 3795/SAE J369) Burn Rate, max 100 mm/minute Note: Not required on face fabric when used as a fully bonded composite. 5. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of these specifications. 5.1 Purchase departments will ensure that both materials defined in these specifications and shipped to any one assembly plant will be produced by one supplier only.

展开阅读全文
相关资源
猜你喜欢
  • DIN EN 15091-2014 Sanitary tapware - Electronic opening and closing sanitary tapware German version EN 15091 2013《卫生陶器 电动开关卫生陶器 德文版本EN 15091-2013》.pdf DIN EN 15091-2014 Sanitary tapware - Electronic opening and closing sanitary tapware German version EN 15091 2013《卫生陶器 电动开关卫生陶器 德文版本EN 15091-2013》.pdf
  • DIN EN 15092-2008 Building valves - Inline hot water supply tempering valves - Tests and requirements English version of DIN EN 15092 2008-09《建筑阀门 直列热水供应调和阀门 试验和要求》.pdf DIN EN 15092-2008 Building valves - Inline hot water supply tempering valves - Tests and requirements English version of DIN EN 15092 2008-09《建筑阀门 直列热水供应调和阀门 试验和要求》.pdf
  • DIN EN 15093-2009 Safety of Machinery - Safety requirements for hot flat rolling mills English version of DIN EN 15093 2009-07《机械的安全性 热扁钢轧机用安全要求》.pdf DIN EN 15093-2009 Safety of Machinery - Safety requirements for hot flat rolling mills English version of DIN EN 15093 2009-07《机械的安全性 热扁钢轧机用安全要求》.pdf
  • DIN EN 15094-2009 Safety of machinery - Safety requirements for cold flat rolling mills English version of DIN EN 15094 2009-04《机械安全 冷轧扁钢厂安全要求》.pdf DIN EN 15094-2009 Safety of machinery - Safety requirements for cold flat rolling mills English version of DIN EN 15094 2009-04《机械安全 冷轧扁钢厂安全要求》.pdf
  • DIN EN 15095-2009 Power-operated mobile racking and shelving carousels and storage lifts - Safety requirements (includes Amendment A1 2008) English version of DIN EN 15095 2009-06《.pdf DIN EN 15095-2009 Power-operated mobile racking and shelving carousels and storage lifts - Safety requirements (includes Amendment A1 2008) English version of DIN EN 15095 2009-06《.pdf
  • DIN EN 15096-2008 en 9326 Devices to prevent pollution by backflow of potable water - Hose Union anti-vacuum valves - DN 15 to DN 25 inclusive Family H type B and type D - General .pdf DIN EN 15096-2008 en 9326 Devices to prevent pollution by backflow of potable water - Hose Union anti-vacuum valves - DN 15 to DN 25 inclusive Family H type B and type D - General .pdf
  • DIN EN 15097-2007 Irrigation techniques - Localised irrigation - Hydraulic evaluation English version of DIN EN 15097 2007-02《灌溉技术 局部灌溉 测定水压》.pdf DIN EN 15097-2007 Irrigation techniques - Localised irrigation - Hydraulic evaluation English version of DIN EN 15097 2007-02《灌溉技术 局部灌溉 测定水压》.pdf
  • DIN EN 15099-1-2007 Irrigation techniques - Remote monitoring and control for irrigation systems - Part 1 General considerations English version of DIN EN 15099-1 2007-08《灌溉技术 灌溉系统.pdf DIN EN 15099-1-2007 Irrigation techniques - Remote monitoring and control for irrigation systems - Part 1 General considerations English version of DIN EN 15099-1 2007-08《灌溉技术 灌溉系统.pdf
  • DIN EN 1510-2004 Playing field equipment - Tennis equipment - Functional and safety requirements test methods German version EN 1510 2004《运动场地器材 网球运动设备 功能和安全技术要求及试验方法》.pdf DIN EN 1510-2004 Playing field equipment - Tennis equipment - Functional and safety requirements test methods German version EN 1510 2004《运动场地器材 网球运动设备 功能和安全技术要求及试验方法》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1