FORD WSF-M1L108-A2-2010 THERMOCOUPLE WIRE POSITIVE (CHROMEL) TO BE USED WITH FORD WSS-M99P1111-A 《阳极(铬镍合金)热电偶丝 与标准FORD WSS-M99P1111-A一起使用 》.pdf

上传人:bowdiet140 文档编号:750163 上传时间:2019-01-14 格式:PDF 页数:3 大小:23.49KB
下载 相关 举报
FORD WSF-M1L108-A2-2010 THERMOCOUPLE WIRE POSITIVE (CHROMEL)  TO BE USED WITH FORD WSS-M99P1111-A  《阳极(铬镍合金)热电偶丝  与标准FORD WSS-M99P1111-A一起使用 》.pdf_第1页
第1页 / 共3页
FORD WSF-M1L108-A2-2010 THERMOCOUPLE WIRE POSITIVE (CHROMEL)  TO BE USED WITH FORD WSS-M99P1111-A  《阳极(铬镍合金)热电偶丝  与标准FORD WSS-M99P1111-A一起使用 》.pdf_第2页
第2页 / 共3页
FORD WSF-M1L108-A2-2010 THERMOCOUPLE WIRE POSITIVE (CHROMEL)  TO BE USED WITH FORD WSS-M99P1111-A  《阳极(铬镍合金)热电偶丝  与标准FORD WSS-M99P1111-A一起使用 》.pdf_第3页
第3页 / 共3页
亲,该文档总共3页,全部预览完了,如果喜欢就下载吧!
资源描述

1、 ENGINEERING MATERIAL SPECIFICATION Material Name Specification Number Date Action Revisions 2010 06 17 N-STATUS No replacement named M. Gramlich, NA 2003 04 29 Revised Para 3.0 inserted; Para 3.1, 3.2, 3.3, 3.7, 4 deleted 1993 04 30 NGA1E10269419003 Released K. Kasper Printed copies are uncontrolle

2、d Page 1 of 3 Copyright 2010, Ford Global Technologies, Inc. THERMOCOUPLE WIRE, POSITIVE (CHROMEL) WSF-M1L108-A2 NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a corrosion and heat resistant nickel-chromium alloy, with temperature-electromotive force positive re

3、lation to nearly all other metals and alloys. 2. APPLICATION This specification was released originally for material used to connect thermocouples to wire assemblies in cooler areas of a vehicle without a loss of accuracy across the thermal gradient. 3. REQUIREMENTS 3.0 STANDARD REQUIREMENTS FOR PRO

4、DUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.4 CONSTRUCTION 3.4.1 Conductor The conductor shall be seven #28 gage solid wires combined to make #20 gage cable. Cable-to-cable butt welds are not

5、allowed. The maximum lay length shall be 25 mm. The conductor shall conform to para 3.4.1.1 - 3.4.1.7 of this specification. 3.4.1.1 Chemical Composition (ASTM E 32) Carbon 0.05% max Silicon 0.25 - 0.75% Chromium 8.0 - 10.0% Columbium & Tantalum 0.05 - 0.55% Nickel Balance 3.4.1.2 Tensile Strength 5

6、17 - 724 MPa (ASTM E 8) 3.4.1.3 Yield Strength 275 - 483 MPa (ASTM E 8) ENGINEERING MATERIAL SPECIFICATION WSF-M1L108-A2 Page 2 of 3 Copyright 2010, Ford Global Technologies, Inc. 3.4.1.4 Elongation, min 20% (ASTM E 8, 250 mm gage, for 25 mm length) 3.4.1.5 Magnetic Attraction The conductor shall be

7、 non-magnetic 3.4.1.6 Temperature-Electromotive Force (ASTM E 207/E 230, EMF in absolute millivolts) Temp C Positive Member vs Positive vs Negative Platinum Member (NBS P567) (Thermocouple Type K) 20 0.527 0.798 95 2.663 3.888 150 4.358 6.137 205 6.133 8.336 3.4.1.7 Limits of Error/ Positive Thermoe

8、lement (ASTM E 230) The positive thermoelement may deviate from the single leg values shown above by no more than the following amounts: Temp C Limit of Error, mV 95 +/- 0.044 150 +/- 0.044 205 +/- 0.044 Any pair of positive and negative thermoelements will be within ASTM E 230 standard limits as a

9、thermocouple. 3.4.2 Insulation 3.4.2.1 The insulating material shall be flame retardant, homogenous, cross-linked polyethylene, similar to SAE J1560 TXL. The material shall adhere closely to, but strip readily from the conductors, leaving them free of insulation and in suitable condition for applyin

10、g terminals. The minimum wall thickness, minimum wall average, and the maximum overall diameter of the finished cable shall be in accordance to Table 2 of SAE J1560. ENGINEERING MATERIAL SPECIFICATION WSF-M1L108-A2 Page 3 of 3 Copyright 2010, Ford Global Technologies, Inc. 3.4.3 Color The color of t

11、he cross-linked polyethylene (PE) cover shall be specified on the engineering drawing and/or release by a numerical suffix following the letter suffix of the material desired. The numerical color coding suffixes shall correspond to the following: 0 - Black 5 - Green 1 - Brown 6 - Blue 2 - Red 7 - Vi

12、olet 3 - Orange 8 - Gray 4 - Yellow 9 - White or natural The first color coding numerical suffix mentioned in describing cable color shall be the base or body color of the finished cable and the second number shall designate the tracer or other auxiliary marking. The base and stripe colors shall cor

13、respond to the Munsell color tolerances specified in SAE J1560, Appendix A, Table A1. 3.5 CABLE QUALITY TEST The following tests: Insulation Physical Properties, Dielectric Test, Cold Bend Test, Flame Test, Oil Absorption Test and Pinch Test correspond respectively to sections 5.2 through 5.7 of SAE

14、 J1560. Results of these tests shall comply with the requirements of SAE J1560 type TXL. The tests listed below shall be conducted in addition to the test listed above. 3.5.1 High Temperature Resistance 25 mm of the insulation shall be removed from each end of a 600 mm sample of the finished cable.

15、The sample shall be suspended around a cylindrical mandrel having a diameter of 115 mm. The weight specified for the Cold Bend Test above, SAE J1560, Section 5.4, Table 5, Type TXL shall be suspended from each end of the conductor. This condition shall be maintained for 168 h in a mechanical convect

16、ion oven at a temperature of 165 +/- 2 C. When cool, the specimen shall be removed from the mandrel and wrapped in the reverse direction around a mandrel of the diameter specified for the Cold Bend Test in the manner prescribed for the Cold Bend Test. The specimen shall then be subjected to the Diel

17、ectric Test, SAE J1560, Section 5.3. 3.5.2 Abrasion Resistance (SAE J 1128, weight support bracket “A“, 0.23 kg weight, min requirement 305 mm) 3.6 IDENTIFICATION Every shipment of Positive Thermocouple grade wire shall be accompanied by a green color coded identification tag certifying material with respect to its coil number, specification, and weight.

展开阅读全文
相关资源
猜你喜欢
  • BS EN 62386-209-2011 Digital addressable lighting interface Particular requirements for control gear Colour control (device type 8)《数字可寻址照明接口 控制装置的特殊要求 色度控制(8类装置)》.pdf BS EN 62386-209-2011 Digital addressable lighting interface Particular requirements for control gear Colour control (device type 8)《数字可寻址照明接口 控制装置的特殊要求 色度控制(8类装置)》.pdf
  • BS EN 62386-210-2011 Digital addressable lighting interface Particular requirements for control gear Sequencer (device type 9)《数字可寻址照明接口 控制装置的特定要求 程序装置(装置类型 9)》.pdf BS EN 62386-210-2011 Digital addressable lighting interface Particular requirements for control gear Sequencer (device type 9)《数字可寻址照明接口 控制装置的特定要求 程序装置(装置类型 9)》.pdf
  • BS EN 62386-301-2017 Digital addressable lighting interface Particular requirements Input devices Push buttons《数字可寻址照明接口 详细要求 输入设备 按钮》.pdf BS EN 62386-301-2017 Digital addressable lighting interface Particular requirements Input devices Push buttons《数字可寻址照明接口 详细要求 输入设备 按钮》.pdf
  • BS EN 62386-303-2017 Digital addressable lighting interface Particular requirements Input devices Occupancy sensor《数字可寻址照明接口 详细要求 输入设备 占用感应器》.pdf BS EN 62386-303-2017 Digital addressable lighting interface Particular requirements Input devices Occupancy sensor《数字可寻址照明接口 详细要求 输入设备 占用感应器》.pdf
  • BS EN 62387-2016 Radiation protection instrumentation Passive integrating dosimetry systems for individual workplace and environmental monitoring of photon and beta radiation《辐射防护仪.pdf BS EN 62387-2016 Radiation protection instrumentation Passive integrating dosimetry systems for individual workplace and environmental monitoring of photon and beta radiation《辐射防护仪.pdf
  • BS EN 62389-2006 Methods of measurement for DVD players《DVD播放器的测量方法》.pdf BS EN 62389-2006 Methods of measurement for DVD players《DVD播放器的测量方法》.pdf
  • BS EN 62391-1-2016 Fixed electric double-layer capacitors for use in electric and electronic equipment Generic specification《电气和电子设备中用固定式双层电容器 第1部分 一般规范》.pdf BS EN 62391-1-2016 Fixed electric double-layer capacitors for use in electric and electronic equipment Generic specification《电气和电子设备中用固定式双层电容器 第1部分 一般规范》.pdf
  • BS EN 62391-2-1-2006 Fixed electric double-layer capacitors for use in electronic equipment - Blank detail specification - Electric double-layer capacitors for power application - .pdf BS EN 62391-2-1-2006 Fixed electric double-layer capacitors for use in electronic equipment - Blank detail specification - Electric double-layer capacitors for power application - .pdf
  • BS EN 62391-2-2006 Fixed electric double-layer capacitors for use in electronic equipment - Sectional specification - Electric double-layer capacitors for power application《电子设备用双层.pdf BS EN 62391-2-2006 Fixed electric double-layer capacitors for use in electronic equipment - Sectional specification - Electric double-layer capacitors for power application《电子设备用双层.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1