1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2004 11 03 Activated C. Bezant Printed copies are uncontrolled Copyright 2004, Ford Global Technologies, LLC Page 1 of 2 DECORATIVE WOOD VENEER, EUROPEAN BIRCH- WSS-M11G37-A BETULA PENDULA, CROWN CUT DECORATIVE WOOD VENEER EUROPEAN BIRCH- WSS-
2、M11G37-A2 BETULA PENDULA, QUARTER CUT DECORATIVE WOOD VENEER EUROPEAN BIRCH- WSS-M11G37-A3 BETULA PENDULA, MASUR CUT 1. SCOPE These specifications define wood veneers for use as decorative product on interior wood veneer assemblies. A1 = Poplar European Birch, Betula Pendula, Crown Cut A2 = Poplar E
3、uropean Birch, Betula Pendula, Quarter Cut A3 = Poplar European Birch, Betula Pendula, Masur Cut 2. APPLICATION The specifications WSS-M11G37-A1/A2/A3 were released for materials used for wooden decorative automotive components. Application of lacquer and other products will need to be considered to
4、 provide a suitable finished product. 3. REQUIREMENTS Material specification requirements are to be used for initial qualification of materials. When in the fully assembled form the veneer assembly must perform to the Material specification requirements of WSS-M15P34-B1 or as specified on the engine
5、ering drawing. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 MATERIAL PROPERTIES 3.2.1 Appearance Color, feature and grain to be as per Master samples 3.2.2 Th
6、ickness Nominal thickness - 0.6mm ENGINEERING MATERIAL SPECIFICATIONWSS-M11G37-A/A3Printed copies are uncontrolled Copyright 2004, Ford Global Technologies, LLC Page 2 of 2 3.2.3 Moisture content 11 - 18% 3.2.4 Density A1/A2/A3 596.6 +/- 50 Kgm-33.3 PERFORMANCE PROPERTIES Veneer selected for its attractive appearance should be uniform in thickness, smooth, flat, free from decay and have face grain suitable for the intended face grade.
