1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2008 01 29 Activated A. Knell Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 1 of 1 DECORATIVE WOOD VENEER, PRESTAINED ZEBRANO-MICROBERLINIA WSS-M11G43-A1 BRAZZAVILLENSIS, CROWN CUT DECORATIVE WOOD VENEER, P
2、RESTAINED ZEBRANO-MICROBERLINIA WSS-M11G43-A2 BRAZZAVILLENSIS, QUARTER CUT 1. SCOPE These specifications define wood veneers for use as decorative product on interior wood veneer assemblies. A1 = Zebrano Microberlinia Brazzavillensis, Crown Cut A2 = Zebrano Microberlinia Brazzavillensis, Quarter Cut
3、 2. APPLICATION These specifications were released for materials used for wooden decorative automotive components. Application of lacquer and other products will need to be considered to provide a suitable finished product. 3. REQUIREMENTS Material specification requirements are to be used for initi
4、al qualification of materials. When in the fully assembled form the veneer assembly must comply with the Material performance requirements as specified on the engineering drawing. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys St
5、andard Requirements For Production Materials (WSS-M99P1111-A). 3.2 MATERIAL PROPERTIES 3.2.1 Appearance Color, feature and grain to be as per Master samples 3.2.2 Thickness Nominal thickness - 0.6mm 3.2.3 Moisture content 11-18% 3.2.4 Density A1/A2 740 +/- 50 kg/m-33.3 PERFORMANCE PROPERTIES Veneer selected for its attractive appearance should be uniform in thickness, smooth, flat, free from decay and have face grain suitable for the intended face grade
