1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Ver. 2 2008 08 28 Revised Corrected typo in 3.2.1 M. Montgomery, FOE 2006 12 11 Activated M. Montgomery Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 1 of 2 FABRIC, MATERIAL PRADA PATTERN, DOBBY WOVEN, WSS
2、M1H1045-A UNLAMINATED 1. SCOPE The material defined by this specification is a woven dobby polyester face fabric. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for use in the B299. 3. REQUIREMENTS In addition to the requirements listed herein
3、 the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric
4、 Count, +/- 10% tolerance (ASTM D 3775) Warp 274 ends/10 cm Weft 170 picks/10 cm 3.2.2 Fabric Weight, 15% tolerance (FLTM BN 106-01) 350 g/m2 3.3 COMPOSITION (ASTM D 629) Fabric 100% polyester 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp 830 dtex144f, air texturized SD RND PES Weft 610 dtex144f, air tex
5、turized SD RND PES 680dtex1f, monofil BR RND PES ENGINEERING MATERIAL SPECIFICATION WSS-M1H1045-A Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 2 of 2 3.5 METHOD OF DYEING Yarn dyed or as approved by Materials Engineering 3.6 FINISHED OPERATIONS As approved by Ma
6、terials Engineering 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that both materials defined in this specification and shipped to any one assembly plant will be produced by one supplier only.
