1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions Ver 1 2008 06 05 Activated M. Montgomery, FOE Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 1 of 2 FABRIC, SCRIPT, WOVEN DOBBY, UNLAMINATED WSS-M1H1056-A 1. SCOPE The material defined by this specification
2、is a woven dobby polyester face fabric 2. APPLICATION This specification was released originally for material used as an interior trim fabric for use in the 2009 Model Year C344 3. REQUIREMENTS In addition to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A2/A
3、3/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 10% tolerance (ASTM D 3775) Warp 275 ends/10 cm W
4、eft 175 picks/10 cm 3.2.2 Fabric Weight, +/- 10% tolerance (FLTM BN 106-01) 375 g/m23.3 COMPOSITION (ASTM D 629) Fabric 100% polyester 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp 550dtex BRIGHT AJT PES Weft NM 5 Chenille SEMIDULL PES Weft 550 dtex Bright AJT PES 3.5 METHOD OF DYEING PIECE DYED 130 C EN
5、GINEERING MATERIAL SPECIFICATIONWSS-M1H1056-APrinted copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 2 of 2 3.6 FINISHED OPERATIONS As approved by Materials Engineering after dyeing POST SET 180 C 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that both materials defined in this specification and shipped to any one assembly plant will be produced by one supplier only.
