1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Ver 1 2016 05 05 N Status No longer used D. Murtonen, NA 2008 06 05 Activated M. Montgomery, FOE Copyright 2016, Ford Global Technologies, LLC Page 1 of 2 FABRIC, SCRIPT, WOVEN DOBBY, UNLAMINATED WSS-M1H1056-A NOT TO BE USED FOR NEW DESIGN 1.
2、 SCOPE The material defined by this specification is a woven dobby polyester face fabric 2. APPLICATION This specification was released originally for material used as an interior trim fabric for use in the 2009 Model Year C344 3. REQUIREMENTS In addition to the requirements listed herein, the fabri
3、c shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/-
4、 10% tolerance (ASTM D 3775) Warp 275 ends/10 cm Weft 175 picks/10 cm 3.2.2 Fabric Weight, +/- 10% tolerance (FLTM BN 106-01) 375 g/m2 3.3 COMPOSITION (ASTM D 629) Fabric 100% polyester 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp 550dtex BRIGHT AJT PES Weft NM 5 Chenille SEMIDULL PES Weft 550 dtex Brig
5、ht AJT PES 3.5 METHOD OF DYEING PIECE DYED 130 C ENGINEERING MATERIAL SPECIFICATION WSS-M1H1056-A Copyright 2016, Ford Global Technologies, LLC Page 2 of 2 3.6 FINISHED OPERATIONS As approved by Materials Engineering after dyeing POST SET 180 C 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that both materials defined in this specification and shipped to any one assembly plant will be produced by one supplier only.
