1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2009 01 22 Activated M. Montgomery, FOE Printed copies are uncontrolled Copyright 2009, Ford Global Technologies, LLC Page 1 of 2 FABRIC, ROUGE PATTERN, CIRCULAR KNITTED FABRIC, WSS-M1H1064-A UNLAMINATED 1. SCOPE The material defined by this s
2、pecification is a Jacquard Circular Knitted polyester face fabric. 2. APPLICATION WSS-M1H1064-A has been introduced as an interior trim fabric for use in the B299 China Model, as a seat insert. 3. REQUIREMENTS In addition to the requirements listed herein, the fabric shall meet all requirements of W
3、SS-M8P18-A1/A2/A3/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 8% tolerance (ASTM D 3775) Wales
4、118 /10 cm Courses 106 /10 cm 3.2.2 Fabric Weight, +/- 5% tolerance (FLTM BN 106-01) 561 g/m23.3 COMPOSITION (ASTM D 629) Fabric 100% polyester 3.4 YARN CONSTRUCTION (ASTM D 1244) Weft dtex 300f96, ( Draw Textured semi dull polyester ) Weft dtex 300f96, ( Air Textured semi dull polyester ) Weft dtex
5、 300f96, ( Air Textured semi dull CD polyester) ENGINEERING MATERIAL SPECIFICATIONWSS-M1H1064-APrinted copies are uncontrolled Copyright 2009, Ford Global Technologies, LLC Page 2 of 2 3.5 METHOD OF DYEING Piece Dyed or as approved by Materials Engineering 3.6 FINISHED OPERATIONS - Piece Dyeing - Re
6、sining - Setting - Back Coating - Setting Or as approved by Materials Engineering 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that the material defined in this specification and shipped to any one assembly plant will be produced by one supplier only.
