1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Rev. 0 2012 10 16 Revised See Summary of revisions M. Montgomery, EU 2012 04 04 Activated M. Montgomery, EU Controlled document at www.MATS Copyright 2012, Ford Global Technologies, LLC Page 1 of 2 FABRIC, TRAXON, WOVEN JACQUARD, WSS-M1H1067-
2、A UNLAMINATED 1. SCOPE The material defined by this specification is a woven jacquard polyester face fabric. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for use in the V36x 2012 Model Year. 3. REQUIREMENTS In addition to the requirements lis
3、ted herein, the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements for Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.
4、2.1 Fabric Count, +/- 7% tolerance (ASTM D3775) Warp 145 ends/10 cm Weft 140 picks/10 cm 3.2.2 Fabric Weight, +/- 7 % tolerance (FLTM BN 106-01) 365 g/m2 3.3 COMPOSITION (ASTM D629) Fabric 100 % polyester 3.4 YARN CONSTRUCTION (ASTM D1244) Warp 1330dtex, f288, (Air textured, semi-dull) Weft 1100dtex
5、 f240, (Air textured, semi-dull) 1100dtex, f288, (Air textured, bright) ENGINEERING MATERIAL SPECIFICATION WSS-M1H1067-A Copyright 2012, Ford Global Technologies, LLC Page 2 of 2 3.5 METHOD OF DYEING Package dyed or as approved by Materials Engineering 3.6 FINISHED OPERATIONS As approved by Materia
6、ls Engineering - Washing (open width) - Stentering 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. Contact for questions concerning Engineering Material Specifications. 4.1 Purchase departments will e
7、nsure that both materials defined in this specification and shipped to any one assembly plant will be produced by one supplier only. 4.2 Global V36x strategy to use tri-laminate construction in all regions. 4.3 If yarn is locally sourced it must meet the above fabric construction for Composition and Yarn Construction. The fabric must also meet the requirements of WSS-M8P18-A1/A2/A3/A4. 5. SUMMARY OF REVISIONS 2012 10 16 Modified Fabric count from +/- 2 ends-picks/10 cm tolerance to +/- 7% tolerance
