1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2007 06 07 Acttivated L. Neves Printed copies are uncontrolled Copyright 2007, Ford Global Technologies, LLC Page 1 of 2 FABRIC, DALLAS PATTERN, WARP KNITTED WSS M1H1110-A 1. SCOPE The material defined by this specification is a warp knitted p
2、olyester fabric. 2. APPLICATION This specification was released originally for material used as an interior trim fabric. 3. REQUIREMENTS In addition to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCT
3、ION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements for Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 10% tolerance (ASTM D 3775) Courses 19 course/cm Wales 15 wales/cm 3.2.2 Fabric Weight, (FLTM BN 106-01) S
4、eats (laminated 2.0 mm foam + backing fabric) 358 g/m +/- 10% Door panels (laminated to 6.0 mm foam) 485 g/m +/- 10% 3.3 COMPOSITION (ASTM D 629) Fabric 100% Polyester Foam - Seats PUR/Polyether D 35 2.0mm +/- 0.5mm Foam Door Panels PUR/Polyether D 35 6.0mm +/- 0.5mm Backing Fabric (Seats only) 100%
5、 Polyester 45g/m +/-10% ENGINEERING MATERIAL SPECIFICATIONWSS-M1H1110-A Printed copies are uncontrolled Copyright 2007, Ford Global Technologies, LLC Page 2 of 2 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp 100 dtex f134, Semi Dull, Round, False Twist Textured Polyester 3.5 METHOD OF DYEING Piece Dyed 3
6、6 FINISHING OPERATIONS Fabric Dye, Heat Set, Nap, Heat Set 3.7 THICKNESS, mm, range (ASTM D 1777) Seat 2.5 3.5 mm Door Panel 6.2 7.2 mm 3.8 TRIMMABILITY PROPERTIES 3.8.1 Stretch, %, range (SAE J855) Seat MD/AMD 10 20% Door Panel MD 20 55% AMD 8 15% 3.9 FLAMMABILITY (ISO 3795/SAE J369) Burn Rate, ma
7、x 100 mm/minute 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that material defined in this specification and shipped to anyone assembly plant will be produced by one supplier only.
