1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Ver 2 2008 06 25 Revised Updated the Title & 1 M. Dumitrescu, FNA 2008 03 19 Activated M. Dumitrescu Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 1 of 2 FABRIC, SPORT CORD PATTERN, WARP KNIT WSS-M1H1128-A
2、 1. SCOPE The material defined by this specification is a Sport Cord pattern, 6 bars, 44 Gauge, Double Needle bar, body cloth of good quality and uniform composition. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for 2010 S197 seat insert. 3.
3、REQUIREMENTS In addition, to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (
4、WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 5% tolerance (ASTM D 3887) Wales 94.5 wales/10 cm Courses 129 courses/10 cm 3.2.2 Fabric Weight, +/- 5%, g/m2 (FLTM BN 106-01) Face w/ no Backcoat 570 Laminated to 3 mm foam 658 3.3 COMPOSITION (ASTM D 629) Tolerance as specified in WS
5、S-M8P18-A1/A4 Fabric 100% Polyester Backcoat No backcoat ENGINEERING MATERIAL SPECIFICATION WSS-M1H1128-A Printed copies are uncontrolled Copyright 2008 Ford Global Technologies, LLC Page 2 of 2 3.4 YARN CONSTRUCTION (ASTM D 1244) Face 16.7 tex f36 x 1 (textured yarn) Middle 3.33 texf1 (monofilament) Back 11.1 tex f34 (textured yarn) 4th 11.1 texf36 (textured yarn) 3.5 METHOD OF DYEING Piece Dye 3.6 FINISHING OPERATIONS Knit, Dye, Heat set, Tenter dry, Inspect
