1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Rev 01 2011 08 23 N Status Replaced by WRS-M1H1129-B M. Dumitrescu, NA 2008 03 19 Activated M. Dumitrescu Controlled document at www.MATS Copyright 2011, Ford Global Technologies, LLC Page 1 of 2 FABRIC, ACE PATTERN, WARP KNIT WSS-M1H1129-A N
2、OT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a ACE pattern, 4 bars, 56 Gauge, Single Needle bar, body cloth of good quality and uniform composition. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for 2009
3、P415 seat bolster. 3. REQUIREMENTS In addition, to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For
4、Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 5% tolerance (ASTM D 3887) Wales 149 wales/10 cm Courses 277 courses/10 cm 3.2.2 Fabric Weight, +/- 5%, g/m2 (FLTM BN 106-01) Face w/ no Backcoat 334 Laminated to 3 mm foam 460 3.3 COMPOSITION (ASTM D 629) Toleran
5、ce as specified in WSS-M8P18-A1/A4 Fabric 100% Polyester Backcoat No backcoat ENGINEERING MATERIAL SPECIFICATION WSS-M1H1129-A Controlled document at www.MATS Copyright 2011, Ford Global Technologies, LLC Page 2 of 2 3.4 YARN CONSTRUCTION (ASTM D 1244) Face 7.8 tex f36 (polyester yarn) Middle 7.8 tex f36 (polyester yarn) Back 7.8 tex f34 (polyester text yarn) 4th 7.8 tex f36 polyester yarn) 3.5 METHOD OF DYEING Piece Dye 3.6 FINISHING OPERATIONS Knit, Heatset, Setmake, Dye, Bulk, Tenter dry, Inspect
