1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Ver 1 2016 05 12 N Status No replacement named D. Murtonen, NA 2008 06 25 Activated M. Dumitrescu, FNA Copyright 2016, Ford Global Technologies, LLC Page 1 of 2 FABRIC, KENSINGTON PATTERN, FLAT WOVEN 25% MINIMUM WSS-M1H1147-A POST INDUSTRIAL
2、CONTENT NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a KENSINGTON pattern, Dobby, flat woven bodycloth of good quality and uniform composition. The fabric is backcoated. 2. APPLICATION This specification was released originally for material used as a seat fabr
3、ic, insert application for 2010 D258 Taurus. 3. REQUIREMENTS In addition to the requirements listed herein, the fabric shall meet all requirements of: WSS-M8P18-A1/A4. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requi
4、rements for Production Materials (WSS-M99P1111-A) 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 5% tolerance (ASTM D 3775) Warp 287 ends/10 cm Fill 122 picks/10 cm 3.2.2 Fabric Weight, +/- 5% tolerance (FLTM BN 106-01) Face Fabric 325 g/m2 Backcoat 30 g/m2 3.3 COMPOSITION (ASTM D 629) Tolerance as
5、 specified in WSS-M8P18-A1/A4. Fabric 87% Polyester, 13% Nylon Backcoating Acrylic ENGINEERING MATERIAL SPECIFICATION WSS-M1H1147-A Copyright 2016, Ford Global Technologies, LLC Page 2 of 2 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp 16.7 tex f48 (false twist polyester) x 3 Fill 85 tex f192 (air textur
6、e 100% PI polyester yarn) x 1 172 tex (flock 100% PA 6.6) x 1 3.5 METHOD OF DYEING Solution dye/yarn-package dye 3.6 FINISHING OPERATIONS Warping, weaving, backcoated, heat set 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase department will ensure that the material defined in this specification and shipped to any one assembly plant will be produced by one supplier only.
