1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Rev. 1 2015 07 27 Revised See Summary of Revisions M. Montgomery, EU 2012 09 06 Released R.Kyle, FoE Controlled document at www.MATS Copyright 2015, Ford Global Technologies, LLC Page 1 of 2 FABRIC, SMITTY TECH, WOVEN JACQUARD, WSS-M1H1153-A1
2、 UNLAMINATED 1. SCOPE The material defined by this specification is a dobby woven polyester face fabric containing a PVC effect yarn. 2. APPLICATION This specification was released originally for material used as an interior trim insert fabric for the B299 Individual Program. The fabric was develope
3、d as a Tri-Laminate. 3. REQUIREMENTS 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements for Production Materials (WSS-M99P1111-A). In addition to the requirements listed herein, the fabric shall meet all require
4、ments of WSS-M8P18-A1/A2/A3/A4 as applicable. 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 10 % (ASTM D3775) Warp 125 ends/10 cm Warp (PVC monofilament) 18 ends/10cm Weft 170 picks/10 cm 3.2.2 Fabric Weight, +/- 10 % (FLTM BN 106-01) 500 g/m2 3.3 COMPOSITION (ASTM D629) Fabric 53% PVC / 47% Polye
5、ster 3.4 YARN CONSTRUCTION (ASTM D1244) Warp 680dtex f 192 (FTF) 0.8 mm tape PVC 540g/m Weft 680dtex f 192 (FTF) 340dtex f 96 (FTF) ENGINEERING MATERIAL SPECIFICATION WSS-M1H1153-A1 Copyright 2015, Ford Global Technologies, LLC Page 2 of 2 3.5 METHOD OF DYEING Solution dyed or as approved by Materia
6、ls Engineering 3.6 FINISHED OPERATIONS Washing, Finishing 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. Contact for questions concerning Engineering Material Specifications. 4.1 Purchase departments
7、 will ensure that materials defined in this specification and shipped to any one assembly plant will be produced by one supplier only. 4.2 Global strategy is to use Tri-laminate construction in all regions. 4.3 If yarn is locally sourced it must meet the above fabric construction, Composition & Yarn construction. The fabric must also meet the requirements of WSS-M8P18-A1/A2/A3/A4. 5 SUMMARY OF REVISIONS 2015 07 27 Fabric count for warp changed from 100 to 125. Added warp PVC monofilament
