FORD WSS-M1H747-A-2008 FABRIC CHROME PATTERN WOVEN JACQUARD UNLAMINATED TO BE USED WITH FORD WSS-M99P1111-A 《CHROME图案的不分层提花机织织物 与标准FORD WSS-M99P1111-A一起使用 》.pdf

上传人:sofeeling205 文档编号:752215 上传时间:2019-01-14 格式:PDF 页数:2 大小:18.98KB
下载 相关 举报
FORD WSS-M1H747-A-2008 FABRIC CHROME PATTERN WOVEN JACQUARD UNLAMINATED  TO BE USED WITH FORD WSS-M99P1111-A  《CHROME图案的不分层提花机织织物  与标准FORD WSS-M99P1111-A一起使用 》.pdf_第1页
第1页 / 共2页
FORD WSS-M1H747-A-2008 FABRIC CHROME PATTERN WOVEN JACQUARD UNLAMINATED  TO BE USED WITH FORD WSS-M99P1111-A  《CHROME图案的不分层提花机织织物  与标准FORD WSS-M99P1111-A一起使用 》.pdf_第2页
第2页 / 共2页
亲,该文档总共2页,全部预览完了,如果喜欢就下载吧!
资源描述

1、 ENGINEERING MATERIAL SPECIFICATION Material Name Specification Number Date Action Revisions 2008 12 03 N-STATUS No Replacement L. Schmalz, FNA / M. Montgomery, FOE 2003 04 10 Revised Para 3.0 inserted; Para 3.1, 3.2, 3.3, 3.10, 3.11, 4 deleted 1997 10 28 Activated N.J. Komatsu Printed copies are un

2、controlled Page 1 of 2 Copyright 2008, Ford Global Technologies, Inc. FABRIC, CHROME PATTERN, WOVEN JACQUARD, WSS-M1H747-A UNLAMINATED NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a woven jacquard polyester face fabric. 2. APPLICATION This specification was re

3、leased originally for material used as an interior trim fabric for 1999 SE161. 3. REQUIREMENTS In addition to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable. 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part

4、producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.4 FABRIC CONSTRUCTION 3.4.1 Fabric Count, +/- 5 % tolerance (ASTM D 3775) Warp 255 ends/10 cm Weft 175 picks/10 cm 3.4.2 Fabric Weight, range (FLTM BN 106-01) 255 - 295 g/m23.5 COMPOSITION (ASTM

5、 D 629) Fabric 100 % polyester ENGINEERING MATERIAL SPECIFICATION WSS-M1H747-A Page 2 of 2 Copyright 2008, Ford Global Technologies, Inc. 3.6 YARN CONSTRUCTION (ASTM D 1244) Warp 540 dtex f130 - 150 (air texturized, semi-dul round) Weft 540 dtex f130 - 150 (air texturized, bright, trilobal) 3.7 METH

6、OD OF DYEING Yarn dyed or as approved by Materials Engineering 3.8 FINISHED OPERATIONS As approved by Materials Engineering 3.9 FLAMMABILITY (ISO 3795/SAE J369) Burn Rate, max 100 mm/minute Note: Not required on face fabric when used as a fully bonded composite. 5. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification: 5.1 Purchase departments will ensure that both materials defined in this specification and shipped to any one assembly plant will be produced by one supplier only.

展开阅读全文
相关资源
猜你喜欢
  • BS ISO 11512-1996 Machinery for forestry - Tracked special machines - Performance criteria for brake systems《林业机械 覆带式专用机械 制动系统性能标准》.pdf BS ISO 11512-1996 Machinery for forestry - Tracked special machines - Performance criteria for brake systems《林业机械 覆带式专用机械 制动系统性能标准》.pdf
  • BS ISO 11513-2011 Gas cylinders Refillable welded steel cylinders containing materials for subatmospheric gas packaging (excluding acetylene) Design construction testing use and pe.pdf BS ISO 11513-2011 Gas cylinders Refillable welded steel cylinders containing materials for subatmospheric gas packaging (excluding acetylene) Design construction testing use and pe.pdf
  • BS ISO 11515-2013 Gas cylinders Refillable composite reinforced tubes of water capacity between 450 L and 3000 L Design construction and testing《气瓶 含水量在450 L到3000 L之间的可再填充的加强型管道 设计.pdf BS ISO 11515-2013 Gas cylinders Refillable composite reinforced tubes of water capacity between 450 L and 3000 L Design construction and testing《气瓶 含水量在450 L到3000 L之间的可再填充的加强型管道 设计.pdf
  • BS ISO 11520-2-2001 Agricultural grain driers - Determination of drying performance - Additional procedures and crop-specific requirements《农用谷粒干燥机 干燥性能的测定 附加方法和农作物特殊要求》.pdf BS ISO 11520-2-2001 Agricultural grain driers - Determination of drying performance - Additional procedures and crop-specific requirements《农用谷粒干燥机 干燥性能的测定 附加方法和农作物特殊要求》.pdf
  • BS ISO 11525-2-2015 Rough-terrain trucks User requirements Slewing variable-reach trucks《崎岖地形卡车 使用者要求 回转伸缩臂式卡车》.pdf BS ISO 11525-2-2015 Rough-terrain trucks User requirements Slewing variable-reach trucks《崎岖地形卡车 使用者要求 回转伸缩臂式卡车》.pdf
  • BS ISO 11525-4-2016 Rough-terrain trucks User requirements Additional requirements for variable-reach trucks handling freely suspended loads《崎岖地形的卡车 用户要求 外伸幅度可变式卡车装卸自由悬挂负载的附加要求》.pdf BS ISO 11525-4-2016 Rough-terrain trucks User requirements Additional requirements for variable-reach trucks handling freely suspended loads《崎岖地形的卡车 用户要求 外伸幅度可变式卡车装卸自由悬挂负载的附加要求》.pdf
  • BS ISO 11525-5-2015 Rough-terrain trucks User requirements Interface between rough-terrain truck and integrated personnel work platfor《越野卡车 用户要求 越野卡车和整合个人工作平台之间的接口》.pdf BS ISO 11525-5-2015 Rough-terrain trucks User requirements Interface between rough-terrain truck and integrated personnel work platfor《越野卡车 用户要求 越野卡车和整合个人工作平台之间的接口》.pdf
  • BS ISO 11527-2010 Building construction Sealants Test method for the determination of stringiness《房屋建筑 密封剂 粘性测定用试验方法》.pdf BS ISO 11527-2010 Building construction Sealants Test method for the determination of stringiness《房屋建筑 密封剂 粘性测定用试验方法》.pdf
  • BS ISO 11528-2016 Buildings and civil engineering works Sealants Determination of crazing and cracking following exposure to artificial or natural weathering《建筑和土木工程 密封剂 因暴露在人工或自然风.pdf BS ISO 11528-2016 Buildings and civil engineering works Sealants Determination of crazing and cracking following exposure to artificial or natural weathering《建筑和土木工程 密封剂 因暴露在人工或自然风.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1