1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2008 02 06 N-STATUS No replacement named M. Dumitrescu 2003 04 10 Revised Para 3.0 inserted; Para 3.1, 3.2, 3.3, 3.10, 3.11, 4 deleted 1997 10 28 Activated N.J. Komatsu Printed copies are uncontrolled Copyright 2008, Ford Global Technologies,
2、LLC Page 1 of 2 FABRIC, FRAMED PATTERN, WOVEN JACQUARD, WSS-M1H760-A UNLAMINATED NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a woven jacquard polyester face fabric. 2. APPLICATION This specification was released originally for material used as an interior tri
3、m fabric for 1999 BE91. 3. REQUIREMENTS In addition to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable. 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Require
4、ments For Production Materials (WSS-M99P1111-A). 3.4 FABRIC CONSTRUCTION 3.4.1 Fabric Count, +/- 10% tolerance (ASTM D 3775) Warp 295 ends/10 cm Weft 165 picks/10 cm 3.4.2 Fabric Weight, range (FLTM BN 106-01) 300 - 330 g/m23.5 COMPOSITION (ASTM D 629) Fabric 100% polyester ENGINEERING MATERIAL SPEC
5、IFICATIONWSS-M1H760-A Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 2 of 2 3.6 YARN CONSTRUCTION (ASTM D 1244) Warp 520 - 570 dtex f150 (false twist fixed, semi- dull, octalobal) Weft 820 - 870 dtex f192 (air texturized, semi- dull, round) 3.7 METHOD OF DYEING Ya
6、rn dyed and spun or as approved by Materials Engineering 3.8 FINISHED OPERATIONS As approved by Materials Engineering 3.9 FLAMMABILITY (ISO 3795/SAE J369) Burn Rate, max 100 mm/minute Note: Not required on face fabric when used as a fully bonded composite. 5. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification: 5.1 Purchase departments will ensure that both materials defined in this specification and shipped to any one assembly plant will be produced by one supplier only.
