1、 ENGINEERING MATERIAL SPECIFICATION Material Name Specification Number Date Action Revisions 2009 01 06 N-STATUS No Replacement B. Haggart, FNA 2003 04 23 Revised Para 3.0 inserted; Para 3.1, 3.2, 3.3, 3.10, 3.11, 4 deleted 1999 02 18 Activated L. Daniv-ZarewychPrinted copies are uncontrolled Page 1
2、 of 2 Copyright 2009, Ford Global Technologies, Inc. FABRIC, BENSON II PATTERN, WOVEN WSS-M1H762-B NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a Jacquard pattern flat woven body cloth of good quality and uniform composition. 2. APPLICATION This specification
3、was released originally for material used as an interior trim fabric for F-150XL, insert fabric. This fabric is used unbacked and laminated. 3. REQUIREMENTS In addition, to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A4 as applicable. 3.0 STANDARD REQUIREME
4、NTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.4 FABRIC CONSTRUCTION 3.4.1 Fabric Count, +/- 5% tolerance (ASTM D 3775) Warp 165 ends/10 cm Fill 118 picks/10 cm 3.4.2 Fabric Weight, ra
5、nge 344 - 411 g/m2(FLTM BN 106-01) 3.5 COMPOSITION (ASTM D 629) Tolerance as specified in WSS-M8P18-A1/A4 Fabric 100% Polyester Backcoating None ENGINEERING MATERIAL SPECIFICATION WSS-M1H762-B Page 2 of 2 Copyright 2009, Ford Global Technologies, Inc. 3.6 YARN CONSTRUCTION (ASTM D 1244) Warp 80.2 te
6、x f 200 (air textured polyester, 4.01 dtex) Fill 66.7 tex F136 (air textured polyester air entangled, 4.9 dtex), 2 ply 3.7 METHOD OF DYEING Package Dye 3.8 FINISHING OPERATIONS 3.9 FLAMMABILITY (ISO 3795/SAE J369) Burn Rate, max 100 mm/minute Note: Not required on face fabric when used as a fully bo
7、nded composite. 5. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 5.1 Purchase departments will ensure that both materials defined in this specification and shipped to any one assembly plant will be produced by one supplier only.
