1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2004 05 26 Activated N. J. Komatsu Printed copies are uncontrolled Copyright 2004, Ford Global Technologies, LLC Page 1 of 2 FABRIC, CHINA TWILL PATTERN, WOVEN DOBBY, WSS-M1H896-A UNLAMINATED 1. SCOPE The material defined by this specification
2、 is a dobby woven polyester face fabric. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for C195 China. 3. REQUIREMENTS In addition to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable
3、 for commercial vehicle application. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 5% tolerance (ASTM D 3775) Warp
4、150 ends/10 cm Weft 136 picks/10 cm 3.2.2 Fabric Weight, +/- 10% tolerance (FLTM BN 106-01) 280 g/m2 Flame retardant back coating 60 g/m23.3 COMPOSITION (ASTM D 629) Fabric 100% polyester Back coating 100% acrylic ENGINEERING MATERIAL SPECIFICATIONWSS-M1H896-A Printed copies are uncontrolled Copyrig
5、ht 2004, Ford Global Technologies, LLC Page 2 of 2 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp 880 dtex f240 (Polyester, semi-dull, air texturized, round section) Weft 880 dtex f240 (Polyester, semi-dull, air texturized, round section) 3.5 METHOD OF DYEING Yarn dyed or as approved by Materials Engineer
6、ing. 3.6 FINISHING OPERATION As approved by Materials Engineering 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that both materials defined in this specification and shipped to any one assembly plant will be produced by one supplier only.
