1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2008 12 08 N-STATUS No Replacement L. Schmalz, FNA / M. Montgomery, FOE 2003 10 09 Activated N. J. Komatsu Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, Inc. Page 1 of 2 FABRIC, CHESS PATTERN, WOVEN JACQUARD, WSS-M1
2、H933-A UNLAMINATED NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a woven jacquard polyester face fabric. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for use in the 2003 Model Year. 3. REQUIREMENTS In ad
3、dition to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-
4、A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, range (ASTM D 3775) Warp 250 ends/10 cm Weft 160 picks/10 cm 3.2.2 Fabric Weight, range (FLTM BN 106-01) 200 - 258 g/m23.3 COMPOSITION (ASTM D 629) Fabric 100% polyester 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp 410 dtex f96 (air texturized, Semi-dull,
5、round) Weft 620 dtex f141 (air texturized, semi-dull round) ENGINEERING MATERIAL SPECIFICATIONWSS-M1H933-A Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, Inc. Page 2 of 2 3.5 METHOD OF DYEING Yarn dyed or as approved by Materials Engineering 3.6 FINISHED OPERATIONS As appr
6、oved by Materials Engineering 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that both materials defined in this specification and shipped to any one assembly plant will be produced by one supplier only.
