1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2004 09 09 Activated N. J. Komatsu Printed copies are uncontrolled Copyright 2004, Ford Global Technologies, LLC Page 1 of 2 FABRIC, HORIZON, INSERT, WOVEN, WSS-M1H971-A UNLAMINATED 1. SCOPE The material defined by this specification is a wove
2、n polyester face fabric. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for C195 face lift project. 3. REQUIREMENTS 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard R
3、equirements For Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 10% tolerance (ASTM D 3775) Ends 360 ends/10 cm Picks 205 picks/10 cm 3.2.2 Fabric Weight, +/- 15% tolerance. (FLTM BN 106-01) 380 g/m23.3 COMPOSITION (ASTM D 629) Fabric 100% polyester 3.4 YARN CO
4、NSTRUCTION (ASTM D 1244) Warp 540 dtex f130 (air texturized, semi-dull, round) Weft 1 790 dtex f178 (air texturized, semi-dull round) 2 750 dtex f288 (air texturized, bright) 3 750 dtex f288 air texturized, bright) ENGINEERING MATERIAL SPECIFICATIONWSS-M1H971-A Printed copies are uncontrolled Copyri
5、ght 2004, Ford Global Technologies, LLC Page 2 of 2 3.5 METHOD OF DYEING Yarn dyed or as approved by Materials Engineering 3.6 FINISHED OPERATIONS As approved by Materials Engineering 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that both materials defined in this specification and shipped to any one assembly plant will be produced by one supplier only.
