FORD WSS-M2G572-A-2005 POLYESTER HOT MELT ADHESIVE TO BE USED WITH FORD WSS-M99P1111-A 《聚酯热熔胶 与标准FORD WSS-M99P1111-A一起使用 》.pdf

上传人:livefirmly316 文档编号:753023 上传时间:2019-01-14 格式:PDF 页数:1 大小:56.27KB
下载 相关 举报
FORD WSS-M2G572-A-2005 POLYESTER HOT MELT ADHESIVE  TO BE USED WITH FORD WSS-M99P1111-A  《聚酯热熔胶  与标准FORD WSS-M99P1111-A一起使用 》.pdf_第1页
第1页 / 共1页
亲,该文档总共1页,全部预览完了,如果喜欢就下载吧!
资源描述

1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2005 05 10 Activated C. Bezant Printed copies are uncontrolled Copyright 2005, Ford Global Technologies, LLC Page 1 of 1 POLYESTER HOT MELT ADHESIVE WSS-M2G572-A 1. SCOPE The material defined by this specification is a polyester based hot melt

2、 adhesive. It is suitable for glue threads in wood veneer surfaces prior to finishing with a polyester lacquer. 2. APPLICATION This specification WSS-M2G572-A was released for materials used for wooden decorative automotive components. 3. REQUIREMENTS Material specification requirements are to be us

3、ed for initial qualification of materials. When in the fully assembled form the veneer assembly must perform to the Material specification requirements of WSS-M15P34-B1 or as specified on the engineering drawing. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producer

4、s must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 MATERIAL PROPERTIES 3.2.1 Melting Temperature 200 C 3.2.2 Density, at 20 C, DIN 51757 1.29g/m3Bulk Density 650 kg/m33.2.3 Solubility in water (20), practically insoluble 3.2.4 Flash Point, ISO 2592 200 C 3.2.5 Ignition Temperature, DIN 51794 450 C 3.2.6 Thermal decomposition at temperatures above 250 C 3.3 PERFORMANCE PROPERTIES The material shall be of uniform quality, free from foreign materials and properties detrimental to normal production use.

展开阅读全文
相关资源
猜你喜欢
  • BS EN 6037-2015 Aerospace series Fibre reinforced plastics Test method Determination of bearing strength《航空航天系列 纤维增强塑料 试验方法 支承强度的测定》.pdf BS EN 6037-2015 Aerospace series Fibre reinforced plastics Test method Determination of bearing strength《航空航天系列 纤维增强塑料 试验方法 支承强度的测定》.pdf
  • BS EN 6038-2015 Aerospace series Fibre reinforced plastics Test method Determination of the compression strength after impact《航空航天系列 纤维增强塑料 试验方法 冲击后抗压强度的测定》.pdf BS EN 6038-2015 Aerospace series Fibre reinforced plastics Test method Determination of the compression strength after impact《航空航天系列 纤维增强塑料 试验方法 冲击后抗压强度的测定》.pdf
  • BS EN 604-1-1997 Aluminium and aluminium alloys - Cast forging stock - Technical conditions for inspection and delivery《铝及铝合金 铸锻件坯 检查和交付技术状态》.pdf BS EN 604-1-1997 Aluminium and aluminium alloys - Cast forging stock - Technical conditions for inspection and delivery《铝及铝合金 铸锻件坯 检查和交付技术状态》.pdf
  • BS EN 604-2-1997 Aluminium and aluminium alloys - Cast forging stock - Tolerances on dimensions and form《铝及铝合金 铸锻件坯 尺寸和形位公差》.pdf BS EN 604-2-1997 Aluminium and aluminium alloys - Cast forging stock - Tolerances on dimensions and form《铝及铝合金 铸锻件坯 尺寸和形位公差》.pdf
  • BS EN 6049-002-2010 Aerospace series - Electrical cables installation - Protection sleeve in meta-aramid fibres - General and list of product standards《航空航天系列 电缆安装 偏聚酰胺纤维保护套管 一般要求和.pdf BS EN 6049-002-2010 Aerospace series - Electrical cables installation - Protection sleeve in meta-aramid fibres - General and list of product standards《航空航天系列 电缆安装 偏聚酰胺纤维保护套管 一般要求和.pdf
  • BS EN 6049-003-2009 Aerospace series - Electrical cables installation - Protection sleeve in meta-aramid fibres - Braided tubular expandable - Product standard《航空航天系列 安装电缆 间聚芳族酰胺纤维.pdf BS EN 6049-003-2009 Aerospace series - Electrical cables installation - Protection sleeve in meta-aramid fibres - Braided tubular expandable - Product standard《航空航天系列 安装电缆 间聚芳族酰胺纤维.pdf
  • BS EN 6049-005-2014 Aerospace series Electrical cables installation Protection sleeve in meta-aramid fibres Sleeve flexible post installation Product standard《航空航天系列 电缆安装 间位芳族聚酰胺纤维.pdf BS EN 6049-005-2014 Aerospace series Electrical cables installation Protection sleeve in meta-aramid fibres Sleeve flexible post installation Product standard《航空航天系列 电缆安装 间位芳族聚酰胺纤维.pdf
  • BS EN 6049-006-2012 Aerospace series Electrical cables installation Protection sleeve in meta-aramid fibres Self-wrapping protective sleeve flexible post installation Product stand.pdf BS EN 6049-006-2012 Aerospace series Electrical cables installation Protection sleeve in meta-aramid fibres Self-wrapping protective sleeve flexible post installation Product stand.pdf
  • BS EN 6049-007-2012 Aerospace series Electrical cables installation Protection sleeve in meta-aramid fibres Self-wrapping protective sleeve flexible post installation operating tem.pdf BS EN 6049-007-2012 Aerospace series Electrical cables installation Protection sleeve in meta-aramid fibres Self-wrapping protective sleeve flexible post installation operating tem.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1