FORD WSS-M2L69-A1-2010 WIRE ALUMINUM 99 88% PURITY TO BE USED WITH FORD WSS-M99P1111-A 《纯度为99 88%的铝线 与标准FORD WSS-M99P1111-A一起使用 》.pdf

上传人:diecharacter305 文档编号:753029 上传时间:2019-01-14 格式:PDF 页数:2 大小:20.36KB
下载 相关 举报
FORD WSS-M2L69-A1-2010 WIRE ALUMINUM 99 88% PURITY  TO BE USED WITH FORD WSS-M99P1111-A  《纯度为99 88%的铝线  与标准FORD WSS-M99P1111-A一起使用 》.pdf_第1页
第1页 / 共2页
FORD WSS-M2L69-A1-2010 WIRE ALUMINUM 99 88% PURITY  TO BE USED WITH FORD WSS-M99P1111-A  《纯度为99 88%的铝线  与标准FORD WSS-M99P1111-A一起使用 》.pdf_第2页
第2页 / 共2页
亲,该文档总共2页,全部预览完了,如果喜欢就下载吧!
资源描述

1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2010 02 15 N-STATUS No replacement named S. Ryzyi, NA 2005 02 14 Revised Inserted 3.0; Deleted 3.1, 3.2, 3.8, 3.9, 4 1995 12 14 Activated L. Merala Printed copies are uncontrolled Copyright 2010, Ford Global Technologies, LLC Page 1 of 2 WIRE,

2、 ALUMINUM, 99.88% PURITY WSS-M2L69-A1 WIRE, ALUMINUM, 99.99% PURITY WSS-M2L69-A2 NOT TO BE USED FOR NEW DESIGN 1. SCOPE The materials defined by these specifications are aluminum wire. 2. APPLICATION These specifications were released originally for materials used as wire for electrically connecting

3、 the lead frame to the substrate in electronic modules. 3. REQUIREMENTS 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.3 CHEMICAL ANALYSIS, % (See Note) A1 A2 Sil

4、icon * * Iron * * Copper * * Magnesium * * Calcium * - Gallium * - Manganese - * Zinc * * Titanium - * Aluminum 99.88 min 99.99 min Note: A1 All elements marked with an asterisk are considered allowable impurities. No single impurity shall exceed 0.05% and the total of all detectable impurities shal

5、l not exceed 0.12%. Determine impurities by spectrographic analysis having a detection limit of 1 ppm. A2 All elements marked with an asterisk are considered allowable impurities. No single impurity shall exceed 0.005% and the total of all detectable impurities shall not exceed 0.01%. Determine impu

6、rities by spectrographic analysis having a detection limit of 1 ppm. ENGINEERING MATERIAL SPECIFICATIONWSS-M2L69-A1/A2 Printed copies are uncontrolled Copyright 2010, Ford Global Technologies, LLC Page 2 of 2 3.4 MECHANICAL PROPERTIES A1 A2 3.4.1 Tensile Strength, MPa, min 69 56 3.4.2 Elongation, %

7、15-25 7-12 3.5 WIRE DIAMETER, mm 0.495 - 0.521 0.241 - 0267 (ASTM F 16) 3.6 SPOOL LENGTH, m, min 48.8 170.7 (ASTM F 72) 3.7 SURFACE QUALITY (ASTM F 584) Surface shall be free from contaminants such as fingerprints, stains and lubricants and essentially free from particulate matter when viewed at 30x magnification. Surface shall be free from cracks and protrusions and essentially free from scratches, draw marks, nicks, pits and kinks when viewed at 30X magnification.

展开阅读全文
相关资源
猜你喜欢
相关搜索

当前位置:首页 > 标准规范 > 国际标准 > 其他

copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1