1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions Rev. 0 2010 07 27 Activated S. Fang, APA Printed copies are uncontrolled Copyright 2010, Ford Global Technologies, LLC Page 1 of 2 OIL, FLUORINATED, GENERAL PURPOSE WSS-M99C114-B 1. SCOPE The material defined by this specification is a general
2、 purpose odorless fluorinated oil intended for use in applications where high temperature resistance, non-flammability, or non-reactivity is required. The oil will not burn, decompose or react to form gummy or solid deposits. 2. APPLICATION The specification was released originally for material used
3、 as an anti-noise by applying the lubricant to the glass run seal header rubber component to prevent the noise caused by friction. This material is compatible with all other elastomeric materials. 3. REQUIREMENTS 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producer
4、s must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 COLOR Pale yellow 3.3 VISCOSITY (ISO 3104/ASTM D 445) Viscosity at 40 C 144 - 220 mm2/s Viscosity at 100C 16.1 - 38 mm2/s 4. GENERAL INFORMATION The information below is provided for clarification and
5、 assistance in meeting the requirements of this specification. This specification was written for the specific oil as indicated on the approved source list. The following are properties of the fluid that may be inherent or checked only as needed. 4.1 VISCOSITY (ISO 3104/ASTM D 445) Viscosity at 20 C
6、 350 mm2/s Viscosity at 40 C 210 mm2/s Viscosity at 100 C 36 mm2/s Viscosity at 204 C 5 mm2/s 4.2 OIL VISCOSITY INDEX 200 (ASTM D 2270) 4.3 FLASH POINT None (ISO 2592/ASTM D 92, Cleveland Open Cup)ENGINEERING MATERIAL SPECIFICATIONWSS-M99C114-B Printed copies are uncontrolled Copyright 2010, Ford Gl
7、obal Technologies, LLC Page 2 of 2 4.4 ODOR None 4.5 DENSITY, AT 15.6 C 1.9 g/ml (ASTM D 891, Method B) 4.6 POUR POINT -46 C (ISO 3016/ASTM D 97) 4.7 OIL VOLATILITY 0.9% max (ASTM D 2595, % in 22 hours at 204 C) 4.8 STORAGE AND SHELF LIFE When stored in a clean, dry place with containers closed to avoid contamination, shelf life should be indefinite.
