1、GM DAEWOO Auto 20 1:10 1:5 1:2 In case a small part is drawn to enlargement scales, it is desirable to add the object to the full size for easy understanding. In this case, only the outward shape may be drawn for the full size object. 5. SCALE ENTERING METHOD 5.1. The scale used in a drawing shall b
2、e entered in the scale column of the title block. EDS-A-1005SCALES PAGE: 2/2 ISSUED DATE: 1996. 04. 10 REVISED DATE: 2008. 05. 31 VERSION: 3 GM DAEWOO Auto & Technology 5.2. In case two or more scales are to be used in a drawing, only the main scale is entered in the title block and the remainder sh
3、all be entered below the corresponding object in a parenthesis. 5.3. In case the object is not proportional to dimensions, the NS 1)mark shall be entered in the scale column. Note 1)NONE-SCALE 5.4. In case of drawings which do not require scales, such as the chart, test spec. diagram, the “_“ shall be entered in the scale column. 6. REFERENCE MATERIALS KS A 0005 General rules of drawing KS B 0001 Mechanical drawing ISO 5455 Technical drawing-scale
