1、GM DAEWOO Auto & Technology EDS Engineering, GM DAEWOO Auto & Technology Standards TRANSMISSION DEFORMATION EDS-T-2214 ISSUED DATE: 1996. 07. 10 REVISED DATE: 2006. 06. 19 VERSION: 2 EDS-T-2214TRANSMISSION DEFORMATION PAGE: 1/1 ISSUED DATE: 1996. 07. 10 REVISED DATE: 2006. 06. 19 VERSION: 2 GM DAEWO
2、O Auto & Technology 1. PURPOSE Determination of the deformation o shafts, axles, and gears. 2. EQUIPMENT 2.1. Clamping angle 2.2. Weights 2.3. Lever arm 2.4. Dial gages 2.5. Leveling plate 3. PERFORMANCE 3.1. Mount clamping angle on the leveling plate, and the transmission on the angle. Load is appl
3、ied as a reaction mount on the output side via a lever arm with weights. Drive has to be blocked for this procedure. 3.2. Deformation of the housing and movements of shafts axles and gears are shown by dial gages. Strain peaks can be made visible by brittle lacquer applied on the housing. *Note : The evaluation of the deformations is up to the Experimental Engineer. Rigging Test Stand
