GOST 11279 3-1983 Organic dyes Testing method of colour fastness to adhesives and plastificators《有机染料 针对粘合剂和增塑剂的色牢度的测试方法》.pdf

相关资源

GSFC-STD-7000 REV A-2013 GENERAL ENVIRONMENTAL VERIFICATION STANDARD (GEVS).pdf

GSFC-S-311-P-822 REV A-2008 Connectors PWB 2 mm cPCI Style High Reliability.pdf

GSFC-S-311-M-70 REV B-2009 SPECIFICATION FOR DESTRUCTIVE PHYSICAL ANALYSIS (DPA)《物理破坏性分析(DPA)规范》.pdf

GSFC NASA GPR 8830 1-2008 Facility Operations Managers [Cancelled GSFC NASA GMI 7234 2]《设备操作管理员[GSFC NASA GMI 7234 2作废]》.pdf

GSFC NASA GPR 7123 1-2008 Systems Engineering [Cancelled GSFC NASA GPR 7120 5 REV A GSFC NASA GPR 7120 5]《系统工程[GSFC NASA GPR 7120 5修订本A和GSFC NASA GPR 7120 5作废]》.pdf

GSFC NASA GPR 1860 1 REV B-2008 Ionizing Radiation Protection《电离性辐射保护》.pdf

GSFC NASA GPR 1800 1 REV B-2008 Goddard Space Flight Center (GSFC) Smoking Guidelines《戈达德宇航中心(GSFC)的吸烟指南》.pdf

GSA ZZ-I-550 F-1992 INNER TUBE PNEUMATIC TIRE《气轮胎内胎》.pdf

GSA W-C-1684-1977 CASSETTES MAGNETIC TAPE AUDIO RECORDING (TWIN-HUB COPLANAR)《音频记录盒式磁带(同面双中枢)》.pdf

GSA TT-W-572 B-1969 WOOD PRESERVATIVE WATER-REPELLENT《木料防腐剂 憎水剂》.pdf

猜你喜欢

FORD WSK-M3D154-A-2004 UNSATURATED POLYESTER (UP) INJECTION MOLDING COMPOUND 17% GLASS FIBER REINFORCED HIGH HEAT RESISTANT TO BE USED WITH FORD WSS-M99P1111-A 《17%玻璃纤维增强的耐高温不饱和聚.pdf

FORD WSK-M3D162-A-2004 PHENOLIC (PF) COMPRESSION MOLDING COMPOUND 50% MINERAL GLASS FIBER FILLED TO BE USED WITH FORD WSS-M99P1111-A 《50%矿物 玻璃纤维填充的酚醛树脂（PF）模压成型料 与标准FORD WSS-M99P.pdf

FORD WSK-M3D168-A1-2006 PHENOLIC (PF) 40% WOOD FLOUR FILLED INJECTION MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《40%木屑填充的酚醛树脂（PF）注塑成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSK-M3D168-A2-2004 PHENOLIC (PF) 40% WOOD FLOUR FILLED COMPRESSION MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《40%木屑填充的酚醛树脂（PF）模压成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSK-M3D175-A-1995 UNSATURATED POLYESTER (PU) 20% CONTINUOUS GLASS FIBER REINFORCED MOLDING COMPOUND《20%玻璃纤维增强的不饱和聚酯（PU）连续成型料》.pdf

FORD WSK-M3D176-A1-2005 PHENOLIC (PF) 35% GLASS FIBER REINFORCED COMPRESSION MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《35%玻璃纤维增强的酚醛树脂（PF）模压成型料 与标准FORD WSS-M99P1111-A.pdf

FORD WSK-M3D176-A2-2005 PHENOLIC (PF) 30% GLASS FIBER REINFORCED COMPRESSION MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《酚醛树脂（PF）30%玻璃纤维增强的模压成型料 与标准FORD WSS-M99P1111-A.pdf

FORD WSK-M3D176-A3-2005 PHENOLIC (PF) 30% GLASS FIBER REINFORCED PRE-PREG SHEET MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《酚醛树脂（PF）30%玻璃纤维增强的预浸处理片状成型料 与标准FORD WSS-M99.pdf

FORD WSK-M3G178-A-2013 TAPE DECORATIVE PRESSURE SENSITIVE EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf