GOST 5935-1973 Hexagon thin slotted nuts with reduced width across flats accuracy class A Construction and dimensions《小尺寸扳手的六角槽形扁螺母(高精度) 结构及尺寸》.pdf

相关资源

GSFC-STD-7000 REV A-2013 GENERAL ENVIRONMENTAL VERIFICATION STANDARD (GEVS).pdf

GSFC-S-311-P-822 REV A-2008 Connectors PWB 2 mm cPCI Style High Reliability.pdf

GSFC-S-311-M-70 REV B-2009 SPECIFICATION FOR DESTRUCTIVE PHYSICAL ANALYSIS (DPA)《物理破坏性分析(DPA)规范》.pdf

GSFC NASA GPR 8830 1-2008 Facility Operations Managers [Cancelled GSFC NASA GMI 7234 2]《设备操作管理员[GSFC NASA GMI 7234 2作废]》.pdf

GSFC NASA GPR 7123 1-2008 Systems Engineering [Cancelled GSFC NASA GPR 7120 5 REV A GSFC NASA GPR 7120 5]《系统工程[GSFC NASA GPR 7120 5修订本A和GSFC NASA GPR 7120 5作废]》.pdf

GSFC NASA GPR 1860 1 REV B-2008 Ionizing Radiation Protection《电离性辐射保护》.pdf

GSFC NASA GPR 1800 1 REV B-2008 Goddard Space Flight Center (GSFC) Smoking Guidelines《戈达德宇航中心(GSFC)的吸烟指南》.pdf

GSA ZZ-I-550 F-1992 INNER TUBE PNEUMATIC TIRE《气轮胎内胎》.pdf

GSA W-C-1684-1977 CASSETTES MAGNETIC TAPE AUDIO RECORDING (TWIN-HUB COPLANAR)《音频记录盒式磁带(同面双中枢)》.pdf

GSA TT-W-572 B-1969 WOOD PRESERVATIVE WATER-REPELLENT《木料防腐剂 憎水剂》.pdf

猜你喜欢

GOST 16225-1981 Shank cutters for machining light alloys Types and dimensions《轻合金加工用立铣刀 类型和尺寸规格》.pdf

GOST 16226-1981 End double-tooth mill thereaded shank for machining light alloys Design and dimensions《轻合金加工用立双齿铣刀螺纹铣尾 设计和尺寸规格》.pdf

GOST 16227-1981 Three angle disk cutters for machining light alloys Design and dimensions《加工轻合金用三面刃圆盘铣刀 结构及尺寸》.pdf

GOST 16228-1981 Three angle disk cutters with inserted blades for machining light alloys Design and dimensions《轻合金加工用带镶齿刀头的三角度圆片铣刀 设计和尺寸规格》.pdf

GOST 16229-1981 Double angle disk cutter with inserted blades for machining light alloys Design and dimensions《加工轻合金用镶高速钢刀片双面刃圆盘铣刀 结构及尺寸》.pdf

GOST 1623-1989 Gauges for inch thread with 55 corner profile Tolerances《55度角侧面英制螺纹规 公差》.pdf

GOST 16230-1981 Cut off cutters for machining light alloys Desigt and dimensions《轻合金加工用切断铰刀 设计和尺寸规格》.pdf

GOST 16231-1981 Shank radius cutters with tapered shank for machining light alloys Design and dimensions《轻合金加工用带锥形钎尾半径铣刀 设计和尺寸规格》.pdf

GOST 16234-1970 Turn-out chill mould Basic dimensions《切断冷硬铸模 基本尺寸规格》.pdf