GOST 18169-1986 Foundry technological processes Terms and definitions《铸造生产工艺过程 术语和定义》.pdf

相关资源

HJ T 317-2006 清洁生产标准造纸工业（漂白碱法蔗渣浆生产工艺）.pdf

HJ T 340-2007 清洁生产标准 造纸工业（硫酸盐化学木浆生产工艺）.pdf

JC T 2089-2011 干混砂浆生产工艺与应用技术规范.pdf

NY T 385-1999 天然生胶浅色标准橡胶生产工艺规程.pdf

NY T 386-1999 硫化天然胶乳生产工艺规程.pdf

NY T 924-2004 浓缩天然胶乳 氨保存离心胶乳生产工艺规程.pdf

NY T 925-2004 天然生胶 胶乳标准橡胶（SCR5）生产工艺规程.pdf

NY T 928-2004 天然生胶 恒粘橡胶生产工艺规程.pdf

SB T 10071-1992 挂面生产工艺测定方法.pdf

SB T 10072-1992 挂面生产工艺技术规程.pdf

猜你喜欢

FORD WSB-M4D854-A1-2010 POLYPROPYLENE (PP) 30% GLASS FIBER REINFORCED REMANUFACTURED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《30%玻璃纤维增强的聚丙烯（PP）废料再生成型料 与标准FORD WSS-M.pdf

FORD WSB-M4D854-A2-2010 POLYPROPYLENE (PP) 40% GLASS FIBER REINFORCED REMANUFACTURED COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《40%玻璃纤维增强的聚丙烯（PP）废料再生成型料 与标准FORD WSS-M99P1111-.pdf

FORD WSB-M4D857-A2-2006 STYRENE MALEIC ANHYDRIDE COPOLYMER (SMA) RUBBER MODIFIED 16 % GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《16%玻璃纤维增强的苯乙烯马来.pdf

FORD WSB-M4D860-A-2011 ACETAL (POM) COPOLYMER 25% MINERAL FILLED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《25%矿物填充模塑材料乙酸醛(POM)共聚物 与福特WSS-M99P1111-A 一起使用》.pdf

FORD WSB-M4D861-A-2006 POLYPHTHALAMIDE (PPA) 45 % GLASS FIBER REINFORCED HEAT STABILIZED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《45%玻璃纤维增强、受热稳定的聚邻苯二甲酰胺(PPA)成型料 与标准.pdf

FORD WSB-M4D862-A-2006 THERMOPLASTIC POLYURETHANE ELASTOMER (TPUR) 60 D HARDNESS 15 % GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《15%玻璃纤维增强的硬度为60.pdf

FORD WSB-M4D865-A-2010 POLYPROPYLENE (PP) 40% LONG GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《40%长玻璃纤维增强模塑材料聚丙烯(PP) 与福特WSS-M99P1111-A 一起使用》.pdf

FORD WSB-M4D865-A2-2010 POLYPROPYLENE (PP) HOMOPOLYMER 50% LONG GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《50%长玻璃纤维增强模塑材料聚丙烯(PP)均聚物 与福特WSS-M99P.pdf

FORD WSB-M4D866-A1-2008 ABS + POLYCARBONATE (ABS+PC) MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《丙烯腈-丁二烯-苯乙烯共聚物(ABS)+聚碳酸酯(ABS+PC)成型料 与标准FORD WSS-M99P1111-A一起使用 [使用 FO.pdf