GOST 19042-1980 Throw-away (indexable) inserts Classification Notation Forms《可转位的多面体刀片 分类 标志体系 形状》.pdf

相关资源

GSFC-STD-7000 REV A-2013 GENERAL ENVIRONMENTAL VERIFICATION STANDARD (GEVS).pdf

GSFC-S-311-P-822 REV A-2008 Connectors PWB 2 mm cPCI Style High Reliability.pdf

GSFC-S-311-M-70 REV B-2009 SPECIFICATION FOR DESTRUCTIVE PHYSICAL ANALYSIS (DPA)《物理破坏性分析(DPA)规范》.pdf

GSFC NASA GPR 8830 1-2008 Facility Operations Managers [Cancelled GSFC NASA GMI 7234 2]《设备操作管理员[GSFC NASA GMI 7234 2作废]》.pdf

GSFC NASA GPR 7123 1-2008 Systems Engineering [Cancelled GSFC NASA GPR 7120 5 REV A GSFC NASA GPR 7120 5]《系统工程[GSFC NASA GPR 7120 5修订本A和GSFC NASA GPR 7120 5作废]》.pdf

GSFC NASA GPR 1860 1 REV B-2008 Ionizing Radiation Protection《电离性辐射保护》.pdf

GSFC NASA GPR 1800 1 REV B-2008 Goddard Space Flight Center (GSFC) Smoking Guidelines《戈达德宇航中心(GSFC)的吸烟指南》.pdf

GSA ZZ-I-550 F-1992 INNER TUBE PNEUMATIC TIRE《气轮胎内胎》.pdf

GSA W-C-1684-1977 CASSETTES MAGNETIC TAPE AUDIO RECORDING (TWIN-HUB COPLANAR)《音频记录盒式磁带(同面双中枢)》.pdf

GSA TT-W-572 B-1969 WOOD PRESERVATIVE WATER-REPELLENT《木料防腐剂 憎水剂》.pdf

猜你喜欢

FORD WSK-M4D623-A-2011 POLYPHENYLENE ETHER + POLYAMIDE (PPE+PA) BLEND MOLDING COMPOUND IMPACT MODIFIED TO BE USED WITH FORD WSS-M99P1111-A 《冲击改良的聚亚苯基乙醚+聚酰胺(PPE+PA)混合模塑材料 与福特WSS-.pdf

FORD WSK-M4D623-A2-2011 POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) IMPACT MODIFIED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《冲击改良的聚亚苯基乙醚+聚酰胺(PPE+PA)模塑材料 与福特WSS-M.pdf

FORD WSK-M4D625-A-2010 POLYBUTHYLENE TEREPHTHALATE (PBT) 40% GLASS FIBER MINERAL REINFORCED LOW WARPAGE MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《低翘曲的40%玻璃纤维 矿物增强的聚对苯.pdf

FORD WSK-M4D626-A1-2010 POLYARYLATE (ARP) MOLDING COMPOUND HIGH HEAT RESISTANT SE TO BE USED WITH FORD WSS-M99P1111-A 《抗高温自熄型聚芳酯(ARP)模塑材料 与福特WSS-M99P1111-A 一起使用》.pdf

FORD WSK-M4D626-A2-2010 POLYARYLATE (ARP) MOLDING COMPOUND HIGH HEAT RESISTANT SE INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《内部抗高温自熄型聚芳酯(ARP)模塑材料 与福特WSS-M99P1111-A 一起使用》.pdf

FORD WSK-M4D630-A-2008 ABS MOLDING COMPOUND HIGH IMPACT INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《内部用耐高冲击丙烯腈-丁二烯-苯乙烯模塑料(和FORD WSS-M99P1111-A一起使用)(使用 FORD WSK-M4D827-A FORD WS.pdf

FORD WSK-M4D631-A-2008 ABS MOLDING COMPOUND HIGH COLD IMPACT INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《耐高冷冲击丙烯腈-丁二烯-苯乙烯模塑料(和FORD WSS-M99P1111-A一起使用)(使用 FORD WSK-M4D827-A FORD.pdf

FORD WSK-M4D632-A2-2005 POLYTETRAFLUOROETHYLENE (PTFE) PASTE EXTRUSION COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚四氟乙烯（PTFE）糊料挤塑成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSK-M4D633-A-2012 POLYETHYLENE (PE) EXPANDED SHEET TO BE USED WITH FORD WSS-M99P1111-A 《聚乙烯(PE)扩展板 与福特WSS-M99P1111-A 一起使用》.pdf