GOST 19948-1974 Wax-pattern dies Surface roughness《熔模用压模 表面粗糙度》.pdf

相关资源

GOST 19950-1974 Bushes for wax-pattern dies Design and dimensions《熔模用压模衬套 结构及尺寸》.pdf

GOST 19951-1974 Guide columns for wax-pattern dies Design and dimensions《熔模用压模导向柱 结构及尺寸》.pdf

GOST 19952-1974 Guide bush for wax-pattern dies Design and dimensions《熔模用压模导管 结构及尺寸》.pdf

GOST 19958-1974 Cylinder ejectors for wax-pattern dies Design and dimensions《熔模用压模圆柱形顶出器 结构及尺寸》.pdf

GOST 19960-1974 Cylinder matrices-blanks for wax-pattern dies Design and dimensions《熔模用压模圆柱形下模坯 结构及尺寸》.pdf

GOST 19966-1974 Support plate for wax-pattern dies with rectangular matrices Design and dimensions《带矩形下模的熔模用压模支承板 结构及尺寸》.pdf

GOST 19972-1974 Stationary retainer rings for wax-pattern dies with rectangular matrices Design and dimensions《带矩形下模的熔模用压模固定套 结构及尺寸》.pdf

GOST 19984-1974 Base-blank for wax-pattern dies with rectangular matrices Design and dimensions《带矩形下模的熔模用压模底座坯料 结构及尺寸》.pdf

GOST 19998-1974 Pipe union for wax-pattern dies Design and dimensions《熔模用压模管接头 结构及尺寸》.pdf

GOST 19999-1974 Wax-pattern dies Specifications《熔模用压模夹具及零件 技术要求》.pdf

猜你喜欢

AIA NAS 985-1972 Uniform Alignment Tests - NAS 900 Series Equipment Specifications.pdf

AIA NAS 986-2001 End Mills Finishing High Speed Steel.125 Inch Thru 3.000 Inch Diameter Rev 3.pdf

AIA NAS 987-1977 Toolholder Nose Configuration - Machine Tools.pdf

AIA NAS 989-1990 Discounted Cash Flow Model (Rev 1).pdf

AIA NAS 99-1946 (Inactive)Rod Assembly-Control Welded Tube 3 8 O.D. Steel 1 4 Adjustable Clevis and Bearing Ends (Rev 1).pdf

AIA NAS 990-1973 Composite Filament Tape Laying Machine - Numerically Controlled (Rev 1).pdf

AIA NAS 991-1975 Resistance Seam and Roll Spot Welding Equipment 3 Phase (Rev 3).pdf

AIA NAS 9921-2002 Bolt Shear Internal Wrenching Short Thread Self-Locking and Non-Locking 6AL Titanium and A286 Cres 160 KSI FTU FSC 5306.pdf

AIA NAS 993-1974 Direct Numerical Control System.pdf