GOST 19956-1974 Aligning bush for wax-pattern dies Design and dimensions《熔模用压模定心管 结构及尺寸》.pdf

相关资源

GOST 19950-1974 Bushes for wax-pattern dies Design and dimensions《熔模用压模衬套 结构及尺寸》.pdf

GOST 19951-1974 Guide columns for wax-pattern dies Design and dimensions《熔模用压模导向柱 结构及尺寸》.pdf

GOST 19952-1974 Guide bush for wax-pattern dies Design and dimensions《熔模用压模导管 结构及尺寸》.pdf

GOST 19958-1974 Cylinder ejectors for wax-pattern dies Design and dimensions《熔模用压模圆柱形顶出器 结构及尺寸》.pdf

GOST 19960-1974 Cylinder matrices-blanks for wax-pattern dies Design and dimensions《熔模用压模圆柱形下模坯 结构及尺寸》.pdf

GOST 19966-1974 Support plate for wax-pattern dies with rectangular matrices Design and dimensions《带矩形下模的熔模用压模支承板 结构及尺寸》.pdf

GOST 19972-1974 Stationary retainer rings for wax-pattern dies with rectangular matrices Design and dimensions《带矩形下模的熔模用压模固定套 结构及尺寸》.pdf

GOST 19984-1974 Base-blank for wax-pattern dies with rectangular matrices Design and dimensions《带矩形下模的熔模用压模底座坯料 结构及尺寸》.pdf

GOST 19998-1974 Pipe union for wax-pattern dies Design and dimensions《熔模用压模管接头 结构及尺寸》.pdf

GOST 19999-1974 Wax-pattern dies Specifications《熔模用压模夹具及零件 技术要求》.pdf

猜你喜欢

BS ISO 22915-1-2016 Industrial trucks Verification of stability General《工业卡车 稳定性校验 一般要求》.pdf

BS ISO 22915-11-2011 Industrial trucks Verification of stability Industrial variable-reach trucks《工业卡车 稳定性能验证 工业多段卡车》.pdf

BS ISO 22915-12-2015 Industrial trucks Verification of stability Industrial variable-reach trucks handling freight containers of 6 m (20 ft) length and longer《工业用卡车 稳定性验证 用于装卸6 m (.pdf

BS ISO 22915-13-2012 Industrial trucks Verification of stability Rough-terrain trucks with mast《工业卡车 稳定性能验证 带机柱的越野卡车》.pdf

BS ISO 22915-15-2013 Industrial trucks Verification of stability Counterbalanced trucks with articulated steering《工业卡车 稳定性验证 铰接式转向平衡卡车》.pdf

BS ISO 22915-2-2008 Industrial trucks - Verification of stability - Counterbalanced trucks with mast《工业卡车 稳定性的鉴定 带桅杆的平衡卡车》.pdf

BS ISO 22915-20-2008 Industrial trucks - Verification of stability - Trucks operating with offset load offset determined by utilisation - Stability tests《工业卡车 稳定性的验证 偏置载荷(利用偏置)特殊条件.pdf

BS ISO 22915-21-2009 Industrial trucks - Verification of stability - Order-picking trucks with operator position elevating above 1200mm《工业车辆 稳定性的验证 具有高于1200mm操作者位置提升的高位拣选货车》.pdf

BS ISO 22915-24-2015 Industrial trucks Verification of stability Slewing variable-reach rough-terrain trucks《工业用卡车 稳定性验证 回转变量达到越野卡车》.pdf