GOST 19961-1974 Rectangular matrices-blanks for wax-pattern dies Design and dimensions《熔模用压模的矩形下模坯 结构及尺寸》.pdf

相关资源

GOST 19950-1974 Bushes for wax-pattern dies Design and dimensions《熔模用压模衬套 结构及尺寸》.pdf

GOST 19951-1974 Guide columns for wax-pattern dies Design and dimensions《熔模用压模导向柱 结构及尺寸》.pdf

GOST 19952-1974 Guide bush for wax-pattern dies Design and dimensions《熔模用压模导管 结构及尺寸》.pdf

GOST 19958-1974 Cylinder ejectors for wax-pattern dies Design and dimensions《熔模用压模圆柱形顶出器 结构及尺寸》.pdf

GOST 19960-1974 Cylinder matrices-blanks for wax-pattern dies Design and dimensions《熔模用压模圆柱形下模坯 结构及尺寸》.pdf

GOST 19966-1974 Support plate for wax-pattern dies with rectangular matrices Design and dimensions《带矩形下模的熔模用压模支承板 结构及尺寸》.pdf

GOST 19972-1974 Stationary retainer rings for wax-pattern dies with rectangular matrices Design and dimensions《带矩形下模的熔模用压模固定套 结构及尺寸》.pdf

GOST 19984-1974 Base-blank for wax-pattern dies with rectangular matrices Design and dimensions《带矩形下模的熔模用压模底座坯料 结构及尺寸》.pdf

GOST 19998-1974 Pipe union for wax-pattern dies Design and dimensions《熔模用压模管接头 结构及尺寸》.pdf

GOST 19999-1974 Wax-pattern dies Specifications《熔模用压模夹具及零件 技术要求》.pdf

猜你喜欢

EN ISO 15318-1999 en Pulp Paper and Board - Determination of 7 Specified Polychlorinated Biphenyls (PCB)《纸浆 纸和纸板对7个指定的聚氯联苯(PCB)的测定》.pdf

EN ISO 15320-2011 en Pulp paper and board - Determination of pentachlorophenol in an aqueous extract《纸浆 纸张和纸板 水提物(ISO 15320-2011)中五氯苯酚的测定》.pdf

EN ISO 15324-2008 en Corrosion of metals and alloys - Evaluation of stress corrosion cracking by the drop evaporation test《金属和合金的腐蚀 使用滴落蒸发试验评估应力腐蚀断裂》.pdf

EN ISO 15329-2008 en Corrosion of metals and alloys - Anodic test for evaluation of intergranular corrosion susceptibility of heat-treatable aluminium alloys《金属和合金的腐蚀 热处理铝合金的粒间腐蚀敏感.pdf

EN ISO 15330-1999 en Fasteners - Preloading Test for the Detection of Hydrogen Embrittlement - Parallel Bearing Surface Method《紧固件 检查氢脆性用预载荷试验 平行支承面法 ISO 15330-1999》.pdf

EN ISO 15349-2-2003 en Unalloyed steel Determination of low carbon content Part 2 Infrared absorption method after combustion in an induction furnace (with preheating)《非合金钢 低碳含量的测定.pdf

EN ISO 15350-2010 en Steel and iron - Determination of total carbon and sulfur content - Infrared absorption method after combustion in an induction furnace (routine method)《钢铁 全碳量.pdf

EN ISO 15351-2010 en Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas (Routine method)《钢铁 氮含量测定 惰性气体流融合后的热电.pdf

EN ISO 15366-1-2016 en Nuclear fuel technology - Chemical separation and purification of uranium and plutonium in nitric acid solutions for isotopic and isotopic dilution analysis .pdf