GOST 19988-1974 Center rods for wax-pattern dies Design and dimensions《熔模用压模中心杆 结构及尺寸》.pdf

相关资源

GOST 19950-1974 Bushes for wax-pattern dies Design and dimensions《熔模用压模衬套 结构及尺寸》.pdf

GOST 19951-1974 Guide columns for wax-pattern dies Design and dimensions《熔模用压模导向柱 结构及尺寸》.pdf

GOST 19952-1974 Guide bush for wax-pattern dies Design and dimensions《熔模用压模导管 结构及尺寸》.pdf

GOST 19958-1974 Cylinder ejectors for wax-pattern dies Design and dimensions《熔模用压模圆柱形顶出器 结构及尺寸》.pdf

GOST 19960-1974 Cylinder matrices-blanks for wax-pattern dies Design and dimensions《熔模用压模圆柱形下模坯 结构及尺寸》.pdf

GOST 19966-1974 Support plate for wax-pattern dies with rectangular matrices Design and dimensions《带矩形下模的熔模用压模支承板 结构及尺寸》.pdf

GOST 19972-1974 Stationary retainer rings for wax-pattern dies with rectangular matrices Design and dimensions《带矩形下模的熔模用压模固定套 结构及尺寸》.pdf

GOST 19984-1974 Base-blank for wax-pattern dies with rectangular matrices Design and dimensions《带矩形下模的熔模用压模底座坯料 结构及尺寸》.pdf

GOST 19998-1974 Pipe union for wax-pattern dies Design and dimensions《熔模用压模管接头 结构及尺寸》.pdf

GOST 19999-1974 Wax-pattern dies Specifications《熔模用压模夹具及零件 技术要求》.pdf

猜你喜欢

STAS 1056-1980 Fittings for natural gas PLUG VALVES WITH SCREWED ENDS Dimensions《天然气配件 带有螺纹端的旋塞阀 尺寸》.pdf

STAS 1058-1971 Gas lototings for natural gas PLUG VALVES WITII SCREW ED ENDS WORKING PRESSURE UP TO 10 000 mm H2O Dimensions《天然气的燃气照明 带有螺纹端的旋塞阀 工作压力达10000mmH2O 尺寸》.pdf

STAS 106-1967 《造纸工业的成品 质量检验规则》.pdf

STAS 106-1988 PAPER AND BOARD Sampling in view of testings and rules for quality checking up《纸和板 测试用的取样和质量检查规定》.pdf

STAS 1061-1971 Gas fittings for natural gas PLUG VALVES WITH END FOR HOSE COUPLING Dimensions《天然气用的煤气设备 软管接头用的带端头的旋塞阀》.pdf

STAS 1062-1973 Equipment for geological investigations RUBBER HOSE FOR PROSPECTING RIGS《地质探测的设备 探矿钻的橡胶软管》.pdf

STAS 1063-1980 Petroleum equipment SWAB《石油设备 拭子》.pdf

STAS 1066-1986 SAW BLADES WITH BACK-AND-FORWARD MOVEMENT FOR METALS《金属的带有前进与后退运动的锯条》.pdf

STAS 1068-1975 SEEDS FOR CONSUMPTION Sampling《消费用的种子 取样》.pdf