GOST 19989-1974 Center buch for wax-pattern dies Design and dimensions《熔模用压模的中心衬套 结构及尺寸》.pdf

相关资源

GOST 19950-1974 Bushes for wax-pattern dies Design and dimensions《熔模用压模衬套 结构及尺寸》.pdf

GOST 19951-1974 Guide columns for wax-pattern dies Design and dimensions《熔模用压模导向柱 结构及尺寸》.pdf

GOST 19952-1974 Guide bush for wax-pattern dies Design and dimensions《熔模用压模导管 结构及尺寸》.pdf

GOST 19958-1974 Cylinder ejectors for wax-pattern dies Design and dimensions《熔模用压模圆柱形顶出器 结构及尺寸》.pdf

GOST 19960-1974 Cylinder matrices-blanks for wax-pattern dies Design and dimensions《熔模用压模圆柱形下模坯 结构及尺寸》.pdf

GOST 19966-1974 Support plate for wax-pattern dies with rectangular matrices Design and dimensions《带矩形下模的熔模用压模支承板 结构及尺寸》.pdf

GOST 19972-1974 Stationary retainer rings for wax-pattern dies with rectangular matrices Design and dimensions《带矩形下模的熔模用压模固定套 结构及尺寸》.pdf

GOST 19984-1974 Base-blank for wax-pattern dies with rectangular matrices Design and dimensions《带矩形下模的熔模用压模底座坯料 结构及尺寸》.pdf

GOST 19998-1974 Pipe union for wax-pattern dies Design and dimensions《熔模用压模管接头 结构及尺寸》.pdf

GOST 19999-1974 Wax-pattern dies Specifications《熔模用压模夹具及零件 技术要求》.pdf

猜你喜欢

GOST 18200-1990 Above 200 kW rotating electric machines Synchronous engines General specifications《200 kW以上旋转电机 同步发动机 通用规范》.pdf

GOST 18210-1972 Disk segment saws for light alloys Specifications《轻合金用月牙形圆锯 技术条件》.pdf

GOST 18211-1972 Transport tare Compression test method《运输皮重 压缩测试方法》.pdf

GOST 18215-1987 Polyamide industrial fabrics for conveyer belts and flat driving belts Specifications《输送带和平传动带用工业聚酰胺布 规范》.pdf

GOST 18217-1990 Key broaches Design《键式拉刀 设计》.pdf

GOST 18218-1990 Thick cored key broaches Design《厚芯键式拉刀 设计》.pdf

GOST 18219-1990 Flat teeth key broaches Design《平齿键式拉刀 设计》.pdf

GOST 18220-1990 Key broaches for higher class roughness Design《高精度槽用键槽拉刀 结构》.pdf

GOST 18221-1999 Mixed full-ration feeds for poultry Specifications《家禽理想配合饲料 技术条件》.pdf