GOST 29241-1991 Rolling bearings Single direction angular contact ball bearings with the contact angle 60 Specifications《60接触角的单列径向支承球轴承 技术条件》.pdf

相关资源

GSFC-STD-7000 REV A-2013 GENERAL ENVIRONMENTAL VERIFICATION STANDARD (GEVS).pdf

GSFC-S-311-P-822 REV A-2008 Connectors PWB 2 mm cPCI Style High Reliability.pdf

GSFC-S-311-M-70 REV B-2009 SPECIFICATION FOR DESTRUCTIVE PHYSICAL ANALYSIS (DPA)《物理破坏性分析(DPA)规范》.pdf

GSFC NASA GPR 8830 1-2008 Facility Operations Managers [Cancelled GSFC NASA GMI 7234 2]《设备操作管理员[GSFC NASA GMI 7234 2作废]》.pdf

GSFC NASA GPR 7123 1-2008 Systems Engineering [Cancelled GSFC NASA GPR 7120 5 REV A GSFC NASA GPR 7120 5]《系统工程[GSFC NASA GPR 7120 5修订本A和GSFC NASA GPR 7120 5作废]》.pdf

GSFC NASA GPR 1860 1 REV B-2008 Ionizing Radiation Protection《电离性辐射保护》.pdf

GSFC NASA GPR 1800 1 REV B-2008 Goddard Space Flight Center (GSFC) Smoking Guidelines《戈达德宇航中心(GSFC)的吸烟指南》.pdf

GSA ZZ-I-550 F-1992 INNER TUBE PNEUMATIC TIRE《气轮胎内胎》.pdf

GSA W-C-1684-1977 CASSETTES MAGNETIC TAPE AUDIO RECORDING (TWIN-HUB COPLANAR)《音频记录盒式磁带(同面双中枢)》.pdf

GSA TT-W-572 B-1969 WOOD PRESERVATIVE WATER-REPELLENT《木料防腐剂 憎水剂》.pdf

猜你喜欢

FORD WSF-M4D785-A3-2008 ABS + POLYCARBONATE BLEND (ABS+PC) 12% TiO2 FILLED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《12%二氧化钛填充丙烯腈-丁二烯-苯乙烯+聚碳酸酯(ABS+PC)混物模塑料v和一起使用(FORD.pdf

FORD WSF-M4D786-A-2006 POLYAMIDE (PA) 66 35% LONG GLASS FIBER REINFORCED HEAT STABILIZED IMPACT MODIFIED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A (Use WSB-M4D678-A)《3.pdf

FORD WSF-M4D803-A2-2006 POLYPHENYLENE SULFIDE (PPS) 65% GLASS FIBER MINERAL REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《65%玻璃纤维 矿物增强的聚苯硫醚(PPS)成型料 与标准FORD WS.pdf

FORD WSF-M4D803-A3-2010 POLYPHENYLENE SULFIDE (PPS) 57% GLASS FIBER MINERAL REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《57%玻璃纤维 矿物增强的聚苯硫醚(PPS)成型料 与标准FORD WS.pdf

FORD WSF-M4D809-A-2010 POLYBUTYLENE TEREPHTHALATE (PBT) 20% PTFE POWDER FILLED EXTRUSION MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《20%聚四氟乙烯(PTFE)粉末填充的聚对苯二甲酸丁二醇酯(PBT)挤.pdf

FORD WSF-M4D846-A-2010 POLYAMIDE 46 (PA46) HEAT STABILIZED 40% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《受热稳定的40%玻璃纤维增强的聚酰胺46(PA46)成型料 与标准FORD.pdf

FORD WSF-M4D881-A-2008 ABS MOLDING COMPOUND CLEAR INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《丙烯腈-丁二烯-苯乙烯透明模塑料 内部用(和FORD WSS-M99P1111-A一起使用)(使用 FORD WSK-M4D827-A FORD WSK-M4D82.pdf

FORD WSF-M4D897-A-2010 POLYAMIDE 46 (PA46) HEAT STABILIZED 50% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《受热稳定的50%玻璃纤维增强的聚酰胺46(PA46)成型料 与标准FORD.pdf

FORD WSF-M4D907-A-2010 POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) HEAT STABILIZED 30% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚亚苯基乙醚+聚酰胺混.pdf