1、p-07- 09 A-A-2326 51 m 797397Lt OOLt2675 1 A-A-23 26 September 27, 1985 COMMERCIAL ITEM DESCRIPTION RASP, HAND, CABINET The General Services Administration has. authorized the use of this commercial item description in preference to Type XXIV, Style B of Federal Specification GGG-P-325, This commerc
2、ial item description covers hand rasps used for cabinet making and woodworking. Sal i ent char act er i s t i cs : Material: Width: Thickness : Des i gn : Tang: Teeth: Marking: Workmanship: Carbon alloy steel. Tapered toward the point. Tapered toward the point. Two edges, each single-cut (one set of
3、 parallel cuts on the surf ace ) . .Of a conventional shape and size suitable for attachment to a wood handle. Tempered to a maximum hardness of 45 on the Rock- well C scale at a point approximately midway of its length and width. Formed by raising portions of the metal from the surface of the blank
4、. Entirely separate from one another. Top of each tooth rounded. Uniformly cut and of uniform height throughout. Cutting surfaces hardened to a uniform hardness. The distance between the heel and point of the rasp, excluding the tang, shall be hardened to not greater than 68 nor less than 64 on the
5、Rockwell C scale. Free from decarburization and brittleness. Marked with the country of origin and the name of the manufactur- er or with a trademark of such known character that the source of manufacture may be readily determined. The teeth of the rasp shall be well-defined, sharp, and uniform in h
6、eight and form. There shall be no evidence of rust or other defect which may impair serviceability, durability, or appearance. PSC 5110 r THIS DOCUMENT CONTAINS a PAGES Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- A-A-232b 51 777777Y 0042696 3 W
7、A-A-2326 2 Back Flat Dimensions at Teeth Rows Teeth Rows Allowable Number Length A B row inch row inch (maximum) Inches Inches Inch Degrees Second-cut Nat i onal Stock largest section per per per per warpage 51 10-00-233-971 6 8 1 /4 9 8-2/3 8 8-2/3 3 5110-00-233-9714 12 1-5/16 11/32 11 6-2/3 10 6-2
8、/3 3 51 10-00-233-971 7 1 O 1-1 I5/l6 /8 9/32 11 6-2/3 10 6-2/3 3 Length dimension: Measured from the point (free or front end) to the heel (junction of the tang with the body of the rasp) and have a tolerance of plus or minus 1/8 inch. Tolerance: Width (A) - lus or minus 1/8 inch. Thickness (By - p
9、lus or minus 1/8 inch. Teeth - plus or minus one tooth per row and one row per inch. Regulatory requirements. In accordance with the section 23.403 of the Federal Acquisition Regulations, the Governments policy is to acquire items composed of the highest percentage of recovered materials practicable
10、, consistent with main- taining a satisfactory level of competition without adversely affecting performance requirements or exposing suppliers employees to undue hazards from the recovered mat er i als. Preservation, packaging, packing, labeling, and marking. The preservation, packag- ing, packing, labeling, and marking shall be as specified in the contract or order. PREPARING ACTIVITY: GS A-FSS Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
