1、VI VI1 Writing, white and colored (JCP D10) White translucent bond (JCP G20) w m A-A-2 804 A March28. 1994 SUPERSEDES December 15, 1932 A-A-2804 25 percent, white translucent bond (JCP GSO) 25 percent opacified bond, white and colored (JCP G60) COMMERCIAL ITEM DESCRIPTION Beneficial comments, recomm
2、endations, additions, deletions, clarifications, etc. and any data which may improve this document should be sent to General Services Administration, Federal Supply Senke, Engineering Branch, 26 Federal Plaza, New York, N.Y. 10278. PAPER, BOND AND WRITING; WHITE AND COLORED The General SeMces Admini
3、stration has authorized the use of this commercial item description, for all Federal Agencies. 1. Scope. This description covers cotton or linen and chemical wood bond and writing papers, and reflects item requirements parailel to the specifications of the Joint Committee on Printing (JCP). 2. Class
4、ification. FSC 7330 Licensed by Information Handling ServicesA-A-2804A 9999974 0263795 1OB = A-A-2804 A 2, Salient characteristic: 2.1 Materiais. Twe I shall conform to JCP G8O. Twe II shall conform to JCP G70. Twe III shall conform to JCP G40. Twe N shall conform to JCP G10. Twe V shall conform to
5、JCP D10. Twe VI SU conform to JCP G20. Twe VII shail conform to JCP G50. TvDe VIII shail conform to JCP %O. 2.1.1 In addition to the above requirements, all types shall contain recycled content as specified in Section 5 2.2 Basis weight. The basis weight ofthe bond and Writing paper shali be as spec
6、ified (See Ordering Data). 2.3 Size and trim. Shall be as specified (See Ordering Data). 2.4 Grain. Shall be as specified (See Ordering Data). 2.5 ar. All types of bond and writing paper shall be fmished in white, blue, buff, green, pink, salmon, or yellow, as specined (See Ordering Data). 2.6 Bleac
7、hing: To obtain an acceptable brightness, in accordance with the performance standards of this document, a chemical bleaching process may be used, When specified in the ordering data (See Ordering Data), the bleaching process shall not include the use of chlorine, chlorine dioxide, or other chlorine
8、 compounds. Tlic Government reserves the right to require proof of such conformance prior to firsty delivery and thereafter as may be otherwise provided for under the provisions of the contract. 2.7 Workmanshig. AU types of paper in accordance with this specification shail be clean, free from dirt s
9、pots. oil spots, shives, foreign matter, and shall be uniform in color. The sheets shaU be free from holes, tears, cuts, folds, scufmarks, lint, fuzz, or any particles that wiii flui or pile or pile on the blanket under normal press conditions. There shall be no splices within a sheet and there shal
10、i be no partial sheets. There shall be no defects that aUrect appearance or serviceability. 3. Oualitv Assurance Provisions. 3.1 Certification. The contractor shail certify and maintain substantiating evidence that the product offered meets the salient characteristics of this Commercial Item Descrit
11、ion, and that the product conforms to the producers own drawings, specifications, standards, and qualiy assurance practices. The Government reserves the right to rcquire proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the cont
12、ract. 2. Licensed by Information Handling ServicesA-A-2804A m 9999974 0163796 044 = A-A-2804A 3.2 Remnsibilitv for insDection. Unless otherwise specined in the contract or purchase order, the supplier is responsible for the performance of all inspection requirements as specined herein. Except as oth
13、erwise specified, the supplier may utilize his own facilities or any commercial laboratory acceptable to the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure that supplies and services
14、 conform to prescribed requirements. i 3.2.1 Testing, when applicable, shall be in accordance with Part 2, Testing Standards and Definitions, of the Government Paper Specincation Standards published by the Joint Committee on Printing. (Note: See individual TAPPIS for specific sampling instructions).
15、 3.2.2 Acceptance criteria shali be as specified in Pari 4, Acceptance Criteria, of the Government Paper Specification Standards published by the Joint Committee on Printing. 4. Remilatorv Reauirements. 4.1 The contractor shall certify that for all types of bond and Writing paper the minimum content
16、 standard shall be no less than 50% recovered materials including 20% post consumer materials in accordance with Executive Order 12873, section 504 (b), dated October 20,1993 (See definition of post consumer materiais and recovered materials in sections 203 and 205). As an alternative to meeting the
17、 standards of section 5040) for all printing and writing papers, the minimum content standard shall be no less han 50% recovered materials that are a waste material byproduct of a finished product other than a paper or textile product which would otherwise be disposed of in a landfill, as determined
18、 by the State in which the facility is located, in accordance with Executive Order 12873, section 504 (c), dated October 20,1993. The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be othemise provided for under the provisions of the
19、contract. 4.2 Recvcled Content Labeling. The recycled content shall be marked on the product or unit pack. 0 5. Preservation. uackagin&Dacking. labeline and markinp. Preservation, packaging, packing, labeling and marking shall be as specified in the contract or order. 6, Application for copies of te
20、chnical documents referenced herein: The issue date in effect on date of invitation for bids or request for proposal shall be apply. (1) TAPPI test methods are available from the Technical Association of the Pulp and Paper Industry, P.O. Box 105113, Atlanta, GA 30348. (2) MIL-STD-105 is available fr
21、om Standardization Documents Order Desk, Bldg. 4D, 700 Robbins Ave., Philadelphia, PA 19111-5094. (3) Copies of Executive Order 12873, dated October 20, 1993 may be obtained from: The White House Publications Wice, New Executive Office Building,Wte House, At: Publications,Washingon, DC. 20500 (202)
22、395-7332 (4) JCP specifications are for sale from Chief Paper Procurement Section, WP, U.S. Government Printing Onice, North Capital and “H“ St., NW, Wash DC 20401. 3. Licensed by Information Handling ServicesA-A-2804A W 9999974 0163797 T8O = A-A-2804 A 7. Ordering Data. Purchasers should select the
23、 preferred options permitted herein, and include the following information in procurement documents: 1) Title, number, and date ofthis specification 2) Type 3) Basis weight 4) size 5) Grain 6) Color 7) Whether bleaching without use of chiorine, chlorine dioxide, or chlorine compound is required. 8)
24、Packaging, packing, labeling and marking 8. Item Identifers/Reference art number system (for cataloging use ordv) A-A-2804-A 1 This example describes a 100 percent, white, bond (JCP G80) paper in accordance with II CID A-A-2804A. II I I-Color 1 -White I 2 - Blue I 4 - Green I 5 -Pink I 6 - Salmon I
25、7 - Yeiiow I 1- A - 100 percent, white, bond (JCP G80) I 3 -Buff B - 50 percent, white, bond (JCP G70) C - 25 percent, bond white and colored (JCP G40) D - Chemical wood, white bond (JCP G10) E - Writing, white and colored (JCP Dio) F - White translucent bond (JCP G20) G - 25 percent, white translucent bond (JCP G50) H - 25 percent opacified bond, white and colored (JCP G60) PREPARING ACTIVITY: GSA-FSS 4. Licensed by Information Handling Services
