1、 A-A-55274 O 9999974 DI167513 9T M I INCH-POUND I A-A-552 7 4 Mav 3. 1995 COMMERCIAL ITEM DESCRIPTION TRUNKS, PHYSICAL CONDITIONING UNIFORM The General Services Administration has authorized the use of this commercial item description for all Federal agencies. 1. SCOPE. This commercial item descript
2、ion covers the requirements for trunks to be worn by Air Force personnel as part of the Physical Conditioning Uniform. 2. CLASSIFICATION. The trunks shall be of one type and class. 3. SALIENT CHARACTERISTICS. 3.1 DescriDtion. The trunks shall be long jam style and shall have hemmed leg bottoms, 1-1/
3、4 2 1/4 inch wide covered elastic waistband with concealed drawcord, in seam pockets positioned approximately 2 inches below bottom of waistband. The pocket opening shall be 5-1/2 + 1/4 inches with a pocket depth of 7 distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or network
4、ing permitted without license from IHS-,-,-3.2 Basic material. The trunks shall be fabricated from jersey knit material having 55 25% cotton and the remaining percentage polyester. The material shall weigh 5.5 L0.5 ounces per square yard when tested in accordance with ASTM D-3887 and shall have a mi
5、nimum of 30 wales per inch and a minimum of 45 courses per inch when tested in accordance with ASTM D-3887. The material shall have a minimum bursting strength of 75 pounds when tested in accordance with ASTM D-3787 and shall not shrink or elongate more than 10 percent when tested in accordance with
6、 AATCC Method 150 using normal machine cycle. The material shall match the standard sample for shade Lt. Heather Grey 466 (See 7.4). 3.2.1 Matchinq. The color of the finished cloth shall match the Standard sample when viewed under filtered tungsten lamps that approximate artificial daylight and havi
7、ng a correlated color temperature of 7500 +200K, with illumination of 100 +SO foot candles, and shall be a good match to the standard sample under incandescent lamplight at 2300 +200K. 3.3 Label. Commercial type label is acceptable, provided that an additional printed cloth label containing the cont
8、ractors name, contract number, size and National Stock number (NSN) is caught on the stitching of the commercial label. The commercial label shall include fiber and laundering information. 3.3.1 Label/taq. Each item shall be individually bar-coded with a paper tag for personal clothing items. The pa
9、per tag shall be standard bleached sulfate having a basis weight of 100 pounds. The paper used for the tags shall have a smooth finish to accept thermal transfer and direct printing. The tags shall have a hole and shall be attached to each item by a fastener, clearly legible and readable by a scanne
10、r. The bar coding element shall be a 13 digit national stock number (NSN). The bar code type shall be a medium to high code density and shall be located so that it is completely visible on the item when it is folded and/or packaged as specified and so that it causes no damage to the item. 2 Provided
11、 by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- A-A-55274 E 9979974 0367.535 742 = A-A-5 5 2 7 4 XLARGE 15 25 23 16 16 7 14-112 3.4 SIZES AND MEASUREMENTS. The trunks shall conform to the measurements in TABLE I. TOLERANCE - +3/4 Minimum - +1/2 - +1/2 - +1/
12、2 - +1/2 - +1/2 TABLE I XSMALL WAIST (RELAXED) WAIST (EXTENDED) LENGTH FRONT RISE BACK RISE INSEAM LEG OPENING Fini: (ii SMALL 12 19 20 13 13 7 11-112 hed Measuremer ches) 21 =E 12-112 13-112 A. Waist (Relaxed) : Measure across waistband from folded edge to folded edge along top edge of waistband. f
13、olded edge along top edge of waistband with waistband stretched taut. B. Lenqth: Measure from top of waistband to bottom hem of leg. C. Front Rise: Measure from top of waistband along front rise to the intersection of inseam. intersection of inseam. D. Inseam: Measure from intersection of inseam alo
14、ng inseam to bottom E. Les Openins: Measure across leg opening from folded edge to folded Waist (Extended) : Measure across waistband from folded edge to Back Rise: Measure from top of waistband along back rise to the hem of leg. edge. Note: The above sizes may be abbreviated as XS, S, M, L, and XL.
15、 3.5 Patterns. Commercial patterns shall be used. They shall conform to the design and requirements cited in this commercial item description. 4. REGULATORY REQUIREMENTS. The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 2
16、3.403 of the Federal Acquisition Regulation (FAR). 4.1 Flammabilitv requirements. The basic material shall conform to the rules and requirements of the Flammable Fabrics Act without the application of a flame retardant finish to the material or to the end item. 3 Provided by IHSNot for ResaleNo repr
17、oduction or networking permitted without license from IHS-,-,-A-A-5.5274 R 9999974 03b753b b89 W A-A-552 74 5. QUALITY ASSURANCE PROVISIONS 5.1 Certification. The contractor shall certify and maintain substantiating evidence that the product offered meets the salient characteristics of this commerci
18、al item description; conforms to the producers own drawings, specifications, standards;and quality assurance practices; and is the same product offered for sale in the commercial marketplace. The Government reserves the right to require proof of such conformance prior to the first delivery and there
19、after as may be otherwise provided for under the provisions of the contract. 5.2 Visual examination. The trunks shall be examined for the defects listed in paragraph 5.3. 5.3 Defects. Any hole, cut, tear; color not as specified; thread ends not removed or not trimmed; any component missing or not as
20、 specified; seam twisted, puckered, open; needle chew or tight tension; label incorrect or illegible; logo incorrect, illegible or misplaced: measurement of trunks not as specified. 5.4 Market acceptabilitv. The item offered, or a generic equivalent, must have been sold to the commercial market or t
21、o the Government for at least 2 years. 5.5 Warranty. The item offered shall include the standard warranty given to the commercial market beginning with the date of delivery of the individual items. 6. PACKAGING 6.1 Preservation, packinq. and markinq. The preservation, packing, and marking shall be a
22、s specified in the contract or order. 7. NOTES 7.1 Source of Government documents. Copies of military and Federal documents are available from: Standardization Documents Order Desk Bldg. 4D 700 Robbins Avenue Philadelphia, PA 19111-5094 7.2 Source of non-Government documents ASTM Test Methods (Appli
23、cations for copies should be addressed to American Society For Testing and Materials, 1916 Race Street, Philadelphia, PA 19103-1187.) 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- A-A-5.527 4 9999974 01675L7 515 A-A-55274 AATCC Test Method (Appl
24、ications for copies should be addressed to American Association of Textile Chemists and Colorists (AATCC), P.O. Box 12215, Triangle Park, NC 27709-2215.) 7.3 Acceptance criteria. Acceptance criteria shall be as specified in the contract or purchase order. 7.4 Sample. For access to standard sample fo
25、r shade address the contracting activity issuing the invitation for bid. MILITARY INTERESTS: Custodians Air Force - 45 CIVIL AGENCY COORDINATING ACTIVITY: GSA - FSS PREPARING ACTIVITY: DLA - CT Project 8415-0046 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license f
26、rom IHS-,-,- A-A-55274 I 9999974 0167518 451 A-A-5 5 2 7 4 j=j-wI r 1 I 6 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A- 5 5 2 7 4 FIGURE 21. AIR FORCE LOO Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
