1、A-A-710 May 7, 1981 COMMERCIAL ITEM DESCRIPTION CHAIRS, EASY (RECLINERS) -The General Services Administration has authorized the use of this commercial item description in preference to Purchase Description FMSF 73-59. This cohnercial item description covers recliner chairs intended for use in livin
2、g quarters and lounge areas. Salient characteristics: These characteristics concisely describe the essential physical and functionallperformance Types : I - Rocker recliner, closed arms. II - Wall recliner, closed arms. characteristics of the comercially available i tem. Styles: A - Contemporary. B
3、 Traditional. Mechanisms. Rocker recliner, three-way, extendable foot-rest, seat and back recline independently. Three positions; rocking, intermediate TV, and fully reclined. Wall recliner, three-way, extendable foot-rest, seat and back recline independently away from wall. sitting, intermediate T
4、V, and fully reclined. Three positions; a Upholstery . Foot-rests , seats ,- backs, and arms chal 1 be upholstered. Fabric. Artificial leather (expanded) shall conform to Federal Specification CCC-A-680, class 2, with treatments (a)(l) regular fire resistance. Upholstery Fabric Standard prepared by
5、the Joint Industry Fabric Standards Comi ttee. shall be flat woven, category I: household applications. Cloth fabric shall conform to the Woven The fabric heavy duty (minimum 15,000 cycles abrasion); normal, in-use, Identification label, The identification label shall have the contractors name or tr
6、ademark, contract or order number, and the month and year of manufacture legibly marked in apermanent dark ink. The label shall be affixed to the bottom of the chair and shall not be removable by hand without defacement. Workmanship. The uDholsering, tailoring, frame construction, and mechanism. sha
7、ll be of the quality to produce finished chairs acceptable in appearance, function, and serviceability and to prevent potential hazard to personnel or their clothing. Performance. Each chair shall comply with the following requirements. Failure to meet these requirements shall be cause for rejection
8、 (1) The chair shall be restrained from movement and 200,pounds of weight shall be distributed in the chair simulating the weight of a man reclining in the chair. operated from a rocking or sitting position to a reclining position for 10,000 cycles, rate 10 - 15 cycles per minute. Any mechanical fa
9、ilure, or failure of the mechanism to maintain the rocking or sitting, intermediate TV, or reclining positions after the test shall be cause for rejection. . The chair shall be (2) The chair shall be restrained from movement and a 125 pound load shall be dropped 2 inches into the seat for 10,000 cyc
10、les, rate 15 - 20 cycles per minute. spring failure shall be cause for rejection. (3) The chair shall be restrained from movement and a vertical load of 400 pounds with a 3 - 4 inch base shall be placed on the center of the chair am for 15 minutes. Any structural failure shw-be cause for .re.iection
11、 THIS DOCUMENT CONTAINS %. PAGES. Any mechanism failure, or - _ FSC 7105 _. - - - - - -2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A=710 (4) The chair shall be restrained from movement and a.100 pound horizontal outward pull shall be applied
12、 to the most forward point of each am (one arm at a time) for one minute, Any structural failure shall be cause for rejection, (5) The chair, in a sitting position, shall.be tilted on two legs at a time to the balance point and allowed to free fall upright, This test shall be repeated twice In each
13、of the four possible drops. Any structural failure shall be cause for rejection, Certification. The contractor shall certify that the product offered meets the salient characteristics of this description, and that the product conforms to the producers own drawings, specifications, standards, and qua
14、lity assurance practices and is the same product sold in the commercial marketplace. The Government reserves the right to require proof of such conformance prior to first dclitery and there- after as may be otherwise provided for under the provisions of the contract, Regulatory requirements. The man
15、ufacturer shall uti1 ize recovered materials to the maximum extent prac ti cab 1 e i Packaging, Dacking, and markingi The items shall be packaged in accordance with normal commercial practice and packed to assure acceptance by comon carrier and provide product protection against loss and damage duri
16、ng multiple shipments, handling, and storage. The shipping container shall be in compliance with National Motor Freight Classification and Uniform Freight Classification, Shipping containers shall be marked as specified in the contract or order: Note: Purchasers should specify the type and style of
17、the chair required and the type and color of the mi c requi red. Copies of Federal Specifications are available from GSA Business Service Centers or the Specification and Consumer Information Branch (WFSIS), NYA Bldg. 197, Washington Navy Yard, Washington, DC 20407, Copies of the Woven Upholstery Fabric Standard are avallable from the National Association OP Furniture Manufacturers, 8401 Connecticut Avenue, NW., Washington, DC 20015, Preparing activity: GSA - FSS 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
